Looking for a reputable shop...

[BKgen®]

...to install a supercharger setup.
I'm gonna try and get my hands on a s/c kit soon, and i'm looking for a good place to get it installed. I've done simple stuff on my ride, like exhaust, headers, coilovers, etc... but i don't wanna f-something up as important as this. So i'm going to get it professionally done. I'm in the hall-co. area, but i don't mind driving down to the Atl. area... I do it every day for school.

Thanks.
bp

[BKgen®]

bump.

somebody told me batlground was an ok shop.
yes/no?

[AE86 Dorifto]

AutoFAB Motorsports. They turbocharged an E36 M3 that has over 500 hp (don't know exact numbers). Call them at (678)482-2221

[§treet_§peed]

o gay..... you have a Tiburon... here's a word of advice run it off a cliff, file a stolen report, then collect insurance claim and get a better car... from what i have always seen and heard time and time again.. TIBURONS BLOW BIG NUTS AND ARE SLOW AS PISS

[slowrolla97]

I would take it eather to autoFAB like posted above or mainstream. Autofab's turn around time is amazing tho! Personally i would do it myself. Get directions, give yourself a long amount of time to finish cause when you have dead lines and time limits you start fucking shit up. A s/c install shouldnt be to bad. Me and a friend did one on an e36 in a weekend

[BKgen®]

k thanks guys.

/thread.

[Fr33way]

You really just need to worry about tuning from a shop. Installing the blower is more relocating things in the engine bay and running a few lines/wires and then the additional fuel setup. If you took a weekend off or a few days of vacation time I'm sure you could knock it out.

[drmcivicsi]

mainstream FTW!!!!!!!!!

[BKgen®]

the s/c setup i'm getting from NGM is more than just a simple bolt-on.
it's not like the alpine s/c where you can just slap it on and go.