New spec v turbo kit

[Big J]

There's going to be a new kit out for the spec v in several months from Treadstone Performance. :goodjob:

[N/A EK]

If you hook me up I might boost my spec:D . BTW give me a call today when you have time. (404)444-9625.

[Big J]

Currently boost is the only way to get respectable power out of the QR25 motor...........but if a few things work out over the next 6 months and a few things I have planned actually work it's going to be a new day for the motor.

[N/A EK]

-Big J

Remember we talked about me comming over to your shop on Sat. Im still up for it, but I have to be back home around 3pm (Cuzin's Wedding). So LMK if your still up for this.

[Big J]

i'll call you tonight

[Big J]

Through an interesting set of events, the great opportunity to design and prototype this kit came up. Needless to say I didn't turn it down.

I should start fabbing/fine tuning the prototype piping over the next couple of weeks to work with the parts we're going to use. The bad thing is I'll be boostless waiting on production prototype parts to get back to me for fittment checks. If they're good they're be some testing and tuning, a little this, a little that, a final approval stamp, a production run, and it'll be on the market. <-----short version

The kit is going to run a Turbonetics T3/T4 5 bolt turbo, Turbonetics Evolution wastegate, most likely an HKS SSQ blow off valve, maybe a Turbonetics Raptor BOV, cast manifold, polished mandrel bent 2.5" aluminum intercooler piping, A Treadstone TR8 intercooler (Core Size, 7.8" X 22" X 3.5", 28" overall), 2.5" polished stainless recirced downpipe, larger injectors and, an SAFC for tuning. We're aming for 8PSI, which will be about 270-280ish WHP and 260-270ish WTQ. The price, don't know yet, but around $3000 +/-.

On a side note fitting the kit up to a 2.5 Altima would only require a redesigned IC piping and downpipe. If there is enough interest I might push to get an Altima kit on the market after the Spec kit comes out.

[Firefightin_tC]

Altimas?! Did you say Altimas!

FUCK YEAH! :goodjob::burnout:

[Big J]

I said 2.5 altimas, that's the '02+ models.

[Firefightin_tC]

It's a Altima nevertheless...

[Footefan52]

Ah no sense in only boosting 8 psi get yourself a multi layered steel head gasket and tune it to at least 10 psi for a daily driver. You can finally see 300whp if you do that. But Turbonetics has a kit out already and you don't need a prototype really. Good luck on you boosting

[Big J]

Turbonetics kit is $5797.93 retail from Turbonetics web site......................<---that's robbery

What there isn't for this car is an affordable setup, and 8PSI is a safe aim for production, it could be marketed at 20 PSI but shit would blow up, so 8 PSI makes sense from a business perspective. The components in the kit will be good for 400+ WHP, but that's up to the customer. Testing and marketing will be done at 8PSI, which should yeild about 270-280 WHP and 260-270 WTQ and come in around $3,000 +/-.

The prototype is crutial. It has to be made using the components that will be included in the kit, turbonetics components, there's no way around that. What I have on my car is good enough for what it cost me to make the whole set up, $1052. The downpipe needs to be totaly redone, and the first pipe off of the intercooler needs slight tweaking before I'd be happy with anything being produced.

[fox]

Testing and marketing will be done at 8PSI, which should yeild about 270-280 WHP and 260-270 WTQ and come in around $3,000 +/-.

Awesome.

[Big J]

IC piping to fit the 3.5 x 7.8 x 22 core intercooler, IC mounting brackets, done, getting shipped out to Treadstone this week.

[Big J]

My car's been too bastardized to use to produce an installation manual. The kit should retail for $2999, and I can probably get you a lower price and discounted installation if I can use your car for pics and to write and develop an installation manual. Anyone interested in getting a hook up for their Spec V?

[Big J]

The group buy price on this kit is going to be around $2600 (estimate, subject to change, most likely not) around late April/May

Turbonetics t3/t4 .63 ar turbo 50 trim good for 350 + whp, turbonetics wastegate, hks ssq bov, 22x7.8x3.5" core treadstone intercooler, mandrel bent 2.5" aluminum IC piping, 2.5" stainless downpipe w/ recirc wastegate, AN fitting oil oil feed and drain lines, t-bolt clamps, grade A silicone couplers, 440cc injectors (most likely), I'm sure there are a lot of things I'm forgetting. 8PSI power output should be around 260-280 whp and 260-280 wtq. :)

I'll be doing installs and tuning at the shop I work at.

[Big J]

I'll be looking for someone with an 02-03 Spec in a month or so. I need to test fit the piping to see if it'll clear the fog lights on the 02-03. Come hang out for a day, I'll buy you lunch and do a free short shifter mod on your car. Read up on short shifter here (http://www.importatlanta.com/forums/showthread.php?t=98702)

[Big J]

bump for an 02-03 w/ a stock bumper to test fit IC piping........ free mod for car and lunch

[Georgia_boy]

damn J, FREE LUNCH!! :D

[Big J]

and a free mod.......... all they have to do is drive to the shop, let me pull the front bumper, and their intake (while intake is off free short shifter mod), then see if the piping will clear the fog light............... tweak the piping a little if need be, cars goes back together, get some lunch....... that's the best I can do, lunch and a free mod, I'm still a poor MF'r

[Georgia_boy]

:lmfao: :lmfao:

[Georgia_boy]

check out this boosted Spec V :goodjob:
almost makes me want one.......almost :D

http://thumbs.vidiac.com/08d7f4c8-f2ab-4d3f-b67e-7b3b7f9124d4.jpg (http://videos.streetfire.net/video/08d7f4c8-f2ab-4d3f-b67e-7b3b7f9124d4.htm)Click here to see Video (http://videos.streetfire.net/video/08d7f4c8-f2ab-4d3f-b67e-7b3b7f9124d4.htm)

[Big J]

Here's a few............the yellow spec v is built, 500whp
the silver on is pushing 8 PSI and like 275 whp
and few random ones

click me (http://www.restylersinc.com/robbie2883/specfi.wmv)

bulit spec gt35r 25psi vs. spec 9psi (http://restylersinc.com/robbie2883/t3specvs35rspec.wmv)

NA spec vs. spec @ 7 psi (http://www.youtube.com/watch?v=u89rVuIlWtg)

I was thinking about it, and there are probably only 100-200 turbo spec v's in the world.

[fox]

I'll be looking for someone with an 02-03 Spec in a month or so. I need to test fit the piping to see if it'll clear the fog lights on the 02-03. Come hang out for a day, I'll buy you lunch and do a free short shifter mod on your car. Read up on short shifter here (http://www.importatlanta.com/forums/showthread.php?t=98702)

Does this offer still stand? If so, PM me.

[Firefightin_tC]

Hell J,

I need to get with you in terms of piecin' a turbo project together for the Alty. I'm gettin' bored...and antsy...

[Big J]

PM me some info about your car, and PM me your goals for your car.

[Big J]

pics, enjoy.

I'll have pics mocked up for fit on the car when my silicone and t-bolts get here, grrrr.

http://i35.photobucket.com/albums/d157/big_j_1979/turbopipes006.jpg
http://i35.photobucket.com/albums/d157/big_j_1979/turbopipes005.jpg
http://i35.photobucket.com/albums/d157/big_j_1979/turbopipes004.jpg
http://i35.photobucket.com/albums/d157/big_j_1979/turbopipes003.jpg
http://i35.photobucket.com/albums/d157/big_j_1979/turbopipes002.jpg
http://i35.photobucket.com/albums/d157/big_j_1979/turbopipes001.jpg

[Firefightin_tC]

J-

Question, Treadstone Turbo it's just for Spec V or SE-R as well?

Simply curious.

[Big J]

same motor and chassis, the main diffrence is the 6 speed transmission and limited slip differential, and the suspension, mainly the spring rate. But it'll work for either, even a auto.

[Firefightin_tC]

same motor and chassis, the main diffrence is the 6 speed transmission and limited slip differential, and the suspension, mainly the spring rate. But it'll work for either, even a auto.


SSSSHHHHHHH! Keep it down man, you'll blow my cover. :ninja:

[Big J]

built tranny auto SE-R would be good for mid to low 12's w/ a stock motor...........

[Firefightin_tC]

built tranny auto SE-R would be good for mid to low 12's w/ a stock motor...........

And take on a Big J's Treadstone Turbo and you're off!

[Big J]

that's with a kit, w/o one an auto's maybe good for high 14's low 15's

shamless plug (my car in the pic BTW):

Treadstone's spev kit....... designed by Big J (http://www.treadstoneperformance.com/gallery-item.phtml?ik=10)

[Firefightin_tC]

that's with a kit, w/o one an auto's maybe good for high 14's low 15's

shamless plug (my car in the pic BTW):

Treadstone's spev kit....... designed by Big J (http://www.treadstoneperformance.com/gallery-item.phtml?ik=10)

Self-Promotion at it's worse...and i love it.

[Firefightin_tC]

BTW Justin, what do I need to get rid of my SES light that's been on since December and I've been too fuckin' lazy to fix it.

Besides, letting Li simply attempt to reset the damn ECU.

[Big J]

A sparkpulg antifouler........ I've got a few at work, they just need to be drilled out.

[Firefightin_tC]

^^^ Whatca doing this weekend? Friday mainly.

[Extrememustang]

I said 2.5 altimas, that's the '02+ models.
I would rather have a base model stick shift 3.5 altima.

[Big J]

The pics are of the prototype done for MEASUREMENTS, not looks or function

I'm going to post up these pics of the prototype downpipe because I should have a production prototype back in about a week. That way you guys have an idea of how the downpipe in the kit will be and will be able to see the transformation from prototype to production quality.

It took me about 12 hours to design and fabricate this pipe (that includes redoing it twice, when there are going to be 50 made and put on a sfelf to be sold, eventually more, you want to make sure it's absolutly right, not just good enough) I hope you like it. I can't wait to see it in polished stainless steel and TIG welded. (use your imagination)

(ch@dbee's corvette killing SRT-4 has one of my pipes/downpipes on it............... :goodjob:)

http://i35.photobucket.com/albums/d157/big_j_1979/Dylanspics045.jpg
http://i35.photobucket.com/albums/d157/big_j_1979/Dylanspics044.jpg
http://i35.photobucket.com/albums/d157/big_j_1979/Dylanspics043.jpg
http://i35.photobucket.com/albums/d157/big_j_1979/turbo008-1.jpg


So long as I get a downpipe back next week you guys should see some dynos sometime between the 20-31st. I'll be dynoing at 5, 8, and 10 psi, butterfly valves removed, 2.5" exhaust AND NO OTHER MODS, no BSR, no light weight flywheel, no cams, basicly a stock block (maybe I won't post the numbers here :ninja:, not that they'd be hard to find) . The 31st is my birthday BTW, I'll be ......... oh god, 28.

[Big J]

oh shiney........ should have this soon

http://i35.photobucket.com/albums/d157/big_j_1979/Dsc04516.jpg

[Big J]

some more teaser pics:

http://i35.photobucket.com/albums/d157/big_j_1979/specdp3.jpg
http://i35.photobucket.com/albums/d157/big_j_1979/specdp2.jpg
http://i35.photobucket.com/albums/d157/big_j_1979/specdp1.jpg

[Big J]

some shiney stuff to look at:

http://i35.photobucket.com/albums/d157/big_j_1979/JustinTurbo028.jpg



http://i35.photobucket.com/albums/d157/big_j_1979/JustinTurbo023.jpg
http://i35.photobucket.com/albums/d157/big_j_1979/JustinTurbo026.jpg


http://i35.photobucket.com/albums/d157/big_j_1979/JustinTurbo025.jpg
http://i35.photobucket.com/albums/d157/big_j_1979/JustinTurbo024.jpg

[Firefightin_tC]

Mmm...turbo goodness.

BTW, I need to see what you can do for me for the Treadstone Turbo kit for the '07 tC.

[Big J]

$3059, I think, let me know, I can put it on too

[Big J]

oh snap you got a Tc....... good looking cars

[Firefightin_tC]

oh snap you got a Tc....... good looking cars

Hell yeah, I had to trade camps!

Not to mention it's alot fast stock than the Alty with bolt-ons.

[Big J]

http://i35.photobucket.com/albums/d157/big_j_1979/Picture275-1.jpg
http://i35.photobucket.com/albums/d157/big_j_1979/Picture269.jpg
http://i35.photobucket.com/albums/d157/big_j_1979/Picture268.jpg
http://i35.photobucket.com/albums/d157/big_j_1979/P6096284.jpg

[Big J]

Ok I finally went to the dyno, so much for sleeper after posting these:

these were the first two runs at 6psi so the motor was fairly cool, the best numbers I've ever seen at such low boost :)

http://i35.photobucket.com/albums/d157/big_j_1979/6PSI.jpg

the next two runs I did were at 9-9.5 psi, I added some fuel after the first pull to get it under 12:1
http://i35.photobucket.com/albums/d157/big_j_1979/high.jpg

.....so after adding fuel to run 9-9.5 psi I did this pull at 7.5-8 and the AFR's were rich, around 11ish

http://i35.photobucket.com/albums/d157/big_j_1979/8psirich.jpg

so after pulling a little fuel between runs I ended up with this graph and a better AFR, but at this point, after 7 pulls, I'm sure heat soak was taking it's toll even though the numbers were better.

http://i35.photobucket.com/albums/d157/big_j_1979/8psi12ish.jpg

It's suprising what the diffrence between 6psi and 10psi feels like for only being 33 whp and 32 WTQ.

[Sibious]

bad ass man. hey i jsut picked up my spec v!!! so we need to get together so i can get the boost going also... lol but ya.. later man

[Big J]

bad ass man. hey i jsut picked up my spec v!!! so we need to get together so i can get the boost going also... lol but ya.. later man

let me know, but you deffinatly need to get rid of that header with the cat, it'll destroy your motor.

[Black4DrEK]

Great kit.