crx swap 90' with 95 ls motor ????

[dowhatido]

got questions, about the swap, i know how to do everything but i never done this mixing up the years like that, does the swap just bolt striaght in, or are there big mods. that take place when doing this, ned to know about the gauges, will i need to put in a new dash??? and the clutch reservoir i will need to install one of these as well???? do the motor mounts bolt right up???? ecu will the connection under the dash plug right up to p72????

please help about to commit to doing this swap just need to know some small details

[2.0civic]

no its not just bolt in...you need mounts and to do some wiring. as far as the guages, you can wire those...no need for a new dash.

[2.0civic]

and also depending on what trim level crx you have, you will have to do wiring for the multi port instead of dual port

[dowhatido]

no its not just bolt in...you need mounts and to do some wiring. as far as the guages, you can wire those...no need for a new dash.

cool ya i got the mounts, after changing mounts they go straight in right?? and this trim on the crx what are your talking about, which trim, and the dual port talk to me like i'm 3yrs if you dont mind.....lol

[dowhatido]

ok ya it's a "dx" so it's dual port, if your talking about fuel injections

[2.0civic]

yeah dual port=wo injectors, multi =4

[2.0civic]

which tranny are you using also? and which distributor?

[dowhatido]

gsr tanny and the dist. thats on it right now what ever it is for the ls, so the multi-port will not get taken care of with the harness