PDA

View Full Version : WTB KA24E engine SOHC



spriggan486
12-21-2006, 08:01 AM
Im in pretty urgent need of a good running KA24E engine. let me know if u have anything

Sack Attack
12-21-2006, 04:54 PM
ka24e=sohc
ka24de=dohc

A buddy of mine got a ka24e from a 93 nissan truck....what u putting it in?

spriggan486
12-21-2006, 09:44 PM
goin into a 240SX

Sack Attack
12-22-2006, 06:16 AM
yes thay the same them...this came from the 93 nissan truck, u just gotta change your intake. when u want it? i think he wants 350

spriggan486
12-22-2006, 06:43 AM
so it will fit on the 240SX tranny? and what do u mean by change my intake? use the intake from the truck? and will that intake fit the 240?



and id prolly want it by next week sum time

Sack Attack
12-22-2006, 06:28 PM
yea it will fit, u need to pull the intake off of this engine and put yours on...u get what im sayin?

spriggan486
12-22-2006, 08:44 PM
the intake manifold or jus the plastic intake piping?

ka-t_Zenki
12-23-2006, 02:15 AM
the intake manifold or jus the plastic intake piping?


the manifold.. thats the only difference in the motors.. also u could pull one out of a nissan frontier truck, same thing applies gots to change the intake mani

spriggan486
12-23-2006, 09:08 AM
will i have to swap both upper and lower manifolds or just the uppper.

spriggan486
12-25-2006, 05:16 PM
bump!!!!!! someone must have one that theyll sell

Sack Attack
12-25-2006, 05:46 PM
dude i already told u my buddy got one....pull the intake off your head, bolt it on this one and i think your alt. bracket. and ride the fuck out....when u want it?

spriggan486
12-25-2006, 05:48 PM
will i have to do the entire intake mani or just the upper part?

Sack Attack
12-25-2006, 09:03 PM
THE WHOLE FUCKER HAS TO CHANGE!!!
all u want from this truck engine is BLOCK AND HEAD!!!! use your exhaust and intake mani....ALL OF IT....its not anymore work to change the complete thing outside of the car

spriggan486
12-25-2006, 09:52 PM
u know what, fuck u and ur buddy's motor. im jus asking questions so i know exactly what im dealing with. i dont give a shit how frustrated it might make u.

Sack Attack
12-26-2006, 09:00 AM
right.....notice that an intake is an intake.....its not ANY MORE work to change it while its out of the car, though it might be a headache to do it inside the car....i aint makin no moneyt off this deal, so fuck you too............if it was my shit, i would have helped as much as possible, but i aint got time to answer 300 questions for free.....i was trying to hook you up with a motor that i know for a fact is a good one, but go ahead take your chances with the next person bitch.

btw, since you dont even know about the intake swap and the uppers and lowers, you might wanna take your car to someone who isnt a complete fuck up.

me and several other guys worded it plain as day that you have to swap the fuckin intake, you kept asking, i got ill and told you in caps thinking that you might pay attention and you blow up on me?

geez dude, buy a fuckin haynes manual next time..need to borrow 15 bux?

spriggan486
12-26-2006, 09:13 AM
first off, haynes doesnt even make a book for the 240, know ur facts next time so u dont sound like an ignorant fuck head. I asked two simple questions that required two simple answers. and the fact that youre gonna go be a douche bag over it just seems like its a personal problem to me. because kid, ur not a hard ass, so stop trying to act like one

Sack Attack
12-26-2006, 06:45 PM
were not gonna hide behind our monitors are we? meet me somewhere and we will see whos a hard ass then...and yea they do, move out of the fuckin slums and you might actually make it to a parts store that carrys one...

im not the one who got on here asking a dumb fuckin question THREE times....whos an ignorant fuckhead now?

thanks

Sack Attack
12-26-2006, 06:57 PM
:doh: :tongue1:

P/N - Manual Title
72010 - 300ZX all models including Turbo '84 thru '89
72015 - Altima all models '93 thru '01
72017 - 240 sx all models '89 thru '92 (SOHC & DOHC)
72020 - Maxima all models '85 thru '92
72021 - Maxima ’93 thru ’01 Does not include information specific to the dual overhead cam (DOHC) engine in 1993 & 1994 SE models.
72030 - Pick-ups '80 thru '97 & Pathfinder '87 thru '95, gas models
72031 - Nissan Frontier Pick-ups 1998 thru 2001, Xterra 2000 and 2001, Pathfinder 1996 thru 2001 Does not include information specific to supercharged engine models.
72040 - Pulsar all models '83 thru '86
64200 - Quest - see Mercury Villager (64200)
72050 - Sentra all models '82 thru '94
72051 - Sentra & 200 SX all models '95 thru '99
72055 - 240 sx all models '93 thru '98
72060 - Stanza all models '82 thru '90
200SX - see Nissan Sentra (72051)

spriggan486
12-26-2006, 07:16 PM
alright kid. if u really wanna meet sumwhere we can. my # is 404 406 4601. hit me up and we'll set sumthing up. i really hope u can fight. honestly if u dont, then dont waste ur time cuz ull only get
fucked the hell up

Sack Attack
12-26-2006, 07:23 PM
too bad i proved ya wrong with the manuals huh? move out of "da hood" and go buy yourself one..

Sack Attack
12-26-2006, 07:26 PM
oh ya...im not trying to fight ya but if u want to then its on

spriggan486
12-26-2006, 08:09 PM
listen kid. u said u wanna meet sumwhere. so grow sum balls and lets meet.