Which Cams?

[Retro]

Im in the process of building my new setup. Im wondering what is going to be the best cam for my car. I was going to go with Skunk 2 Pro 2's or Skunk 2 Stage 2 Turbo cams. Im shooting for 600whp. Which cam do yall think will be better? Or any other suggestions? Thanks in advance everyone!

[Vteckidd]

pro 2s are way too aggressive.

Skunk2 STAGE 1s NOT PRO 1s or ITR cams

they support 700whp

[CHADbee]

i'd go with the ITR cams

[drmcivicsi]

itr cams ftw!!

[Retro]

pro 2s are way too aggressive.

Skunk2 STAGE 1s NOT PRO 1s or ITR cams

they support 700whp

when you say stage 1s do you mean regular stage 1s or turbo stage 1s?

[Da_unknown]

think he means regular skunk2 stage 1's

[99SI]

buy my Rocket Motorsports M22x cams. They would be nasty

[Vteckidd]

when you say stage 1s do you mean regular stage 1s or turbo stage 1s?
they are the same thing, i have a set here

Get your pricing from me, im a skunk2 dealer ;)

[99SI]

Damn it he needs the m22x. go ahead and tell him how awesome they would be

[Vteckidd]

not in a turbo car LOL

[BigBadBoy]

depends on wat kind of manifold you are using. for the the price stay away from the CTR cams. they are way to expensive for stock. if your going to use a log manifold use the stage 2 turbo cams. and if you have an equal length use the pro 2s. big, aggresive cams work very very well with equal length manifold and are way better than stock. just take a look at the cams i'll be using with my equal length manifold. i've done tons of research on this and there are plenty of dyno's that prove this. with log manifold it better to have a cam with high lift and short duration and with equal high lift long duration. just pick a good cam according to wat your whole set it up is going to be like.

My cams VS stock GSR cams

http://i108.photobucket.com/albums/n20/BigBadBoy_2003/Honda/100_3251.jpg

http://i108.photobucket.com/albums/n20/BigBadBoy_2003/Honda/100_3256.jpg

http://i108.photobucket.com/albums/n20/BigBadBoy_2003/Honda/100_3257.jpg

[Vteckidd]

ill have to disagree, the PRO2s are way to aggresive for a turbo car.

in FI you want to get as much air IN , and as much air OUT as possible. You would want a shorter lift, an a high duration cam, but to a point.

guys are making 700whp with ITR an Skunk2 stage 1 cams. I see no reason to GAMBLE on other cams

[BigBadBoy]

it isn't a gamble its been proven time and time again.

[Vteckidd]

sow me dynos where TURBO cars have SKUNK2 PRO2s and are making MORE POWER than ITR or Skunk2 STAGE 1s. id love to see it

[Vteckidd]

Hell Peter made 800whp with ITR cams. He had a custom set of turbo cams made, and LOST POWER

[2.0 under pressure]

I gained 38 whp from going from GSR cams to set of second gen itr, also known as ctr cams. At the exact same amount of boost. Robi
Pro2's are blow by sticks in FI. IMO of course