View Full Version : Smoke coming from PCV misfiring from 1&3
twinj
12-06-2006, 10:24 AM
Ok I did the whole tune up. Replace Distributor Cap, Rotor Button, Wires, Plugs. Now i have Smoke comming out of the Pcv valve(small filter) and misfiring from cylinders 1&3 at idle if i raise the rpm can't tell its misfiring. I was wondering could it be the Timing,or headgasket. If anyone knows what the problem is i would appreciate the help. I could use any information.
B18b swap
5lbs Boost(fmu,stock,injectors,Safc tuned)
Vteckidd
12-06-2006, 10:46 AM
sounds like blow by. do a compression test. replace the PCV valve
twinj
12-06-2006, 10:48 AM
Thanks Mike, Where could i find a place to do?
Vteckidd
12-06-2006, 10:49 AM
is it coming from the BLACK BREATHER BOX, or the valve cover?
if its coming from the valve cover, then soundsl ike you have crushed ringlands
twinj
12-06-2006, 10:54 AM
coming from the valve cover. How much is it to replace ringlands
Vteckidd
12-06-2006, 11:42 AM
that USUALLY means the pistons are done.
You need to do a compression test, we charge $40 to do one
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.