Anyone know where I can get 3/4" Lexan?

[Eimaj]

Title says it all.

I can't find a glass shop to sell it? Anyone know of a place that sells it.

I need a piece that is 15" x 33".

[DJ XtRaK©]

www.theinstallbay.com

look under fabrication section

[Eimaj]

Sweet. Thanks man. Reps for ya....

[Eimaj]

The site checkout dosen't work there.

ANy other sites?

[BanginJimmy]

What do you need 3/4" lexan for?


http://freckleface.com/shopsite_sc/store/html/plasticmaterial.html
http://www.estreetplastics.com/

didnt look for exactly what you need, but I have those saved in my fav's

[redgst97]

You might want to try a few of the local stereo shops in the area... They sometimes use Lexan. Maybe not as thick as 3/4 for day-to-day installs, but they might have better access to it.

[David88vert]

Piedmont Plastics
5025 SOUTH ROYAL ATLANTA DR.
P.O. BOX 188
Tucker, GA 30085-0188
Toll Free: 800-868-7898
Phone: 770-939-5660
Fax: 770-939-1616
Email: [email protected]


I used to use them for any custom plexi needed for sub boxes. Not cheap, but excellent quality. They polish the edges right, drill the holes in correct placements, etc.

[redgst97]

Piedmont is used by a LOT of local places.

Or

www.selectproducts.com

Specifically:
http://68.208.124.66/dealer/Itemdesc.asp?CartId={29F9B773-EFC1EVEREST-41E9-9B98-378E5F85900E}&ic=PCL1024&eq=&Tp=

If you can drop you 33" to 32", then it seems like it will run about $136.50 for the piece (1" thick) through Select....

John

[Eimaj]

Thanks a lot guys. I'll spread the reps all around.

All of the sites listed were great and provided me a way to get all the small stuff I needed to "finish" the install, that I could easily get back home, but didn't have a resource for in ATL. Any other sites that anyone has in their bookmarks, I would appreiate the links.

I am using the glass for a sub enclosure. I can use 1" plexi instead of 3/4 Lexan without a problem. Thanks for the help.

Anyone have a resource for button covers? Preferably, with a stainless or chrome finish.

[Allstar3.8T]

Also Commercial Plastics is in down town ATL, I have bought from them, and they cut to size also. They were near GaTech I believe.
GC

[SRCRX]

www.selectproducts.com (http://www.selectproducts.com)


:goodjob: