swap question

[civicracer5000]

so my enigne blew up and I decide to do my swap I got a b16a2, the engine is in already but my harness looks different my 98 ex have from the ecu 3 connectors (2 gray ones and 1 blue) while the si harness only has to 2 (1 blue and 1 gray) how do I do to put the ecu if is missing one connector.

any help would be appreciated

thanx in advance

[civicracer5000]

nobody can help me

[§treet_§peed]

as Mike aka Mr. KiDD

[nofive-0]

What harness is in the car?

[silversol]

It would be east to just use your 98 ex harness and run the wire for the knock sensor and run a chiped obd 1 ecu because the 99 up wiring harness and ecu will not work in your 98!

[civicracer5000]

I used the 98 ex harness

[nofive-0]

Im not completely sure, but I think you have to pin it to the connector for the b16 ecu. Search it on honda-tech or even google it. This swap has been
done alot so I am sure you will find some info.