Log in

View Full Version : AC/HEATER?


DrunkScotsman
11-20-2006, 08:09 AM
i took out my whole ac , my heater does not work , fuses are good , if the ac is gone will that effect the heater from workin? , where do i start trouble shootin ? this no heat issuse is freeeeeeeeeeezin my balls off!
DrunkScotsman
11-20-2006, 09:16 PM
b4 work bump! someone please help , it is soooooooooo f'n cold!
civicracer5000
11-20-2006, 10:33 PM
does it blow any air at all?
Z U L8R
11-20-2006, 11:30 PM
having ac and having heat are basically not related, the question is does it blow anything at all ^^
RidingHigh
11-20-2006, 11:50 PM
mines blow but no heat at all either.
§treet_§peed
11-21-2006, 01:03 AM
ok if it blow air with the ac on but it's not cold you need free-on(sp?) if it blows air but is not hot with heater on, maybe heater coil? also if it doesn't blow it could be the heater coil aslo, and/or a fan hung up..not sure..maybe even possible for a relayburnt up:thinking:
DrunkScotsman
11-21-2006, 08:06 AM
no air at all! i can put it on full blast and get nothin , not even any noise
Z U L8R
11-21-2006, 10:07 AM
no air at all! i can put it on full blast and get nothin , not even any noise

then your blower motor is not coming on, check the blower motor fuse(s), supply power and ground to the motor to see if the motor's any good, and go from there
civicracer5000
11-21-2006, 04:29 PM
must likely is your air blower
§treet_§peed
11-21-2006, 07:49 PM
lol your car sucs so bad it won't even blow..lol j/k
DrunkScotsman
11-21-2006, 08:39 PM
:lmfao: :lmfao: :lmfao: ^^^^ ha ha ha you a fun guy , lol! you so funny! i am gonna take out the heater motor tomorrow , any way i can its bad when its out?
§treet_§peed
11-21-2006, 08:54 PM
^^ ummm..:thinking: english please?
DrunkScotsman
11-21-2006, 09:00 PM
shit , my bad , lol , when i take the htr motor out , is there any way i can tell if it is bad , just by lookin at it?
§treet_§peed
11-21-2006, 09:59 PM
not rly anything besides really really blunt and obvious stuff..the only way to really tell would be to start diss-assembling the motor
Z U L8R
11-21-2006, 10:56 PM
it has 2 wires going to it, ground one and put 12 volts on the other, if the thing spins then the motor's not your problem
§treet_§peed
11-21-2006, 11:12 PM
^^ good point...if it works after trying that then it is some where in the wiring possibly being a relay or something else as previsously stated