Your take on Lambo doors

[Z32redondo]

So what do you think about them? Im trying to go "show and go" with the car and think it may be something that will give it a real exotic type of look.

Question: Should I put lambo's on the 300Z

[Brett]

Exotic look? Dont think so...LOL

If your car is show and you want show points and you like them then go with them.

If your going for "Go" then I wouldnt

[Evil Goat]

todays "altezza's"....

[Sammich]

dnt do it..i hate lambos b/c they are too plentiful(not hate bert) but thats the reason im not doing it on my truck...suicide doors FTW

[Jimmy B]

i could think of a LOT better way to spend 1500 bucks..

[Annihilation]

i say you save it for a twin swap $$ :)

save the lambos til ur done with that.... by the way lambos are teh gayness. dont disgrace your Z, even though it is a vert

[Brett]

dnt do it..i hate lambos b/c they are too plentiful(not hate bert) but thats the reason im not doing it on my truck...suicide doors FTW

Oh I wasnt gonna do them either, They got to played out to quick, But when my car is strictly a show car and I dont drive it very often it was a way I decided to go, show points.

[cornercarver78]

One of the worse possible Ideas I can think of. Besides being useless, they will probably rattle and increase noise in the car.

[Hektik]

dont do it........ theyre to played out.....use the money for something better.

[Z32redondo]

Exotic look? Dont think so...LOL

If your car is show and you want show points and you like them then go with them.

If your going for "Go" then I wouldnt

I didnt mean it as in like ferrarai, lambo, expansive car wannabe type of exotic look, i meant it like as in a more self personalized car type of look.

[VTECin5th]

rice

[Brett]

I know, I was just messin with ya.... lol

[speedminded]

naww man, weld the t-tops to the doors and put the hinges on the t-bar....gullwing z32 would be a sure show winner.

[HeLLo iM iZzY]

"Go" with lambos? Hmmm...











*HEADSHOT*

[Z32redondo]

naww man, weld the t-tops to the doors and put the hinge on the t-bar....gullwing z32 would be a sure show winner.

If I had t-tops...

[Sammich]

Oh I wasnt gonna do them either, They got to played out to quick, But when my car is strictly a show car and I dont drive it very often it was a way I decided to go, show points.

thats all their good for..i puke at the sight of lambos

[HiPSI]

naww man, weld the t-tops to the doors and put the hinges on the t-bar....gullwing z32 would be a sure show winner :2cents:


yeah, a gullwing convertible would be a first! ;)

[koukis14]

Z32s allready have Lambo parts on them...the headlights. Nissan stopped there for a reason, lambo doors are gay. Actually its more like Lambos have z lights, the part numbers are identical.

[Hektik]

theres nothing PERSONALIZED about doing the same thing 20 mexicans are doing on buford hwy to theyre del sols..............
if u were strictly entering ur car into show competitions then i would understand because the idiot judges give points for rice... but if u also plan on the go side there is a lot of other thing u can do with the money to personalize ur car..
either way its ur car ur money and in the end u will make the decision....

[VTECin5th]

Go Rice???

[speedminded]

If I had t-tops...oh yeah, viewing sigs help! haha

ok then, even though your 300zx has '99+ Lamborghini Diablo headlights it still doesn't make it a Lamborghini....and anything less than a Lamborghini doesn't deserve Lamborghini doors.

[Nemesis]

do reverse suicide doors, that would be original

[Z32redondo]

theres nothing PERSONALIZED about doing the same thing 20 mexicans are doing on buford hwy to theyre del sols..............
if u were strictly entering ur car into show competitions then i would understand because the idiot judges give points for rice... but if u also plan on the go side there is a lot of other thing u can do with the money to personalize ur car..
either way its ur car ur money and in the end u will make the decision....

Ya so...most likely not going lambo door...end...:boobies:!!!

[speedminded]

One word for you, Strosek. A few letters for you, BBS LM. Now that's a show car ;)

[ahmonrah]

thats all their good for..i puke at the sight of lambos......says the man with the shaved doors and vents on a toyota pickup....:lmfao: just fucking with you man!!

[ahmonrah]

do reverse suicide doors, that would be originalum.....LIRL!!

[Hulud]

if its not on a lambo then its dumb imo

[koukis14]

You know what wouldnt be gay...about 700 WHP.

[Sammich]

......says the man with the shaved doors and vents on a toyota pickup....:lmfao: just fucking with you man!!

i keep dreamin dat was my truck..the vents are pretty pimp though..im feelin those

[ahmonrah]

^ahh.....dddddddddddddddddduuuuuuuuuddde!

[gijoe0720]

dnt do it..i hate lambos b/c they are too plentiful(not hate bert) but thats the reason im not doing it on my truck...suicide doors FTW



hell yeah. I wish I could put them on my truck but there is only one other mini truck around here and he is puttin them on his right now so I don't want to do them now.

[Sammich]

i gots no minitruckers around here

[gijoe0720]

lucky

[Maniaç]

Didn't read the whole thread but lambo doors are Rice. they are only meant for exotics

[Leadfoot_mf]

:gay:

[4dmin]

lambo doors = gay unless you drive an exotic

[unkn0wndj]

I think it looks pretty original.. i dont see many people with them over here on this side of Atlanta.

[Hulud]

I think it looks pretty original.. i dont see many people with them over here on this side of Atlanta.
you apparently dont goto car shows :goodjob:

[Leadfoot_mf]

you apparently dont goto car shows :goodjob:
check your rep fag

[Hulud]

check your rep fag
i did, fag

refer to the thread you repped me in LOL

[Leadfoot_mf]

i know i am giving it back to u just so it stays at the top

[Hulud]

haha im immune to it now so i feel it coming in this thread too

[Hulud]

http://i19.photobucket.com/albums/b181/leadfoot_mf/japan2_3_1.jpg

[Leadfoot_mf]

lirl hahahahahahahahahahahahaha check my new sig

[Hulud]

sig FTW

[DerrickT]

my take... lame. I don't know if they have changed but, I remember when they first came out, my old shop installed them on a civic and they were crap... dented the fenders, wouldnt stay adjusted... it was a nightmare.

leave your doors alone. :2cents:

[Brett]

my take... lame. I don't know if they have changed but, I remember when they first came out, my old shop installed them on a civic and they were crap... dented the fenders, wouldnt stay adjusted... it was a nightmare.

leave your doors alone. :2cents:

Well actually, That all depends on the kit. If you spend the money and buy either a kit from Decah or Vertical Door Inc. you wont have those issues. The low dollar universal kits, Yeah even alot of body shops wont put those on because of that. I have the Decah kit, Was expensive ($1100) but they dont mess up the car in any way. You get what youpay for when it comes to those kind of things

[Sammich]

lucky

yea thats why i love it so much:yes:

[2micro4u]

So what do you think about them? Im trying to go "show and go" with the car and think it may be something that will give it a real exotic type of look.

Question: Should I put lambo's on the 300Z
If you car looks mostly stock I would not get lambo's yet. Now if its heavily modded and looks clean not ricey and its for show I say go for it.
Now if its like till mid - end of 07 before rims/other mods/paint then I would rethink and maybe go without them and wait for the next new trend.

[DerrickT]

Well actually, That all depends on the kit. If you spend the money and buy either a kit from Decah or Vertical Door Inc. you wont have those issues. The low dollar universal kits, Yeah even alot of body shops wont put those on because of that. I have the Decah kit, Was expensive ($1100) but they dont mess up the car in any way. You get what youpay for when it comes to those kind of things

it was the only kit out at the time, it was $1500. I am sure they have gotten better...
I guess it all boils down to, its your car, do what you want.

[civic95]

I think its a lot of money for $200 in parts and metal. In a few yrs you'll regret spending the money on that I bet.