PDA

View Full Version : Accord w/ H22 Questions


BimmerMan
11-07-2006, 08:37 PM
I have a 96 accord w/ a H22A in it. Will an exhaust for an accord fit up to the H22 header?? What's the redline for this engine anyways? If I replace the engine mounts should they be for an accord or a prelude?
brads94accord
11-07-2006, 08:40 PM
depends on the year of the car, I believe the CB7 accord exhuast will bolt up to the h22 downpipe. redline is usually around 7200 i believe.
§treet_§peed
11-07-2006, 09:41 PM
auto or manual?
MIami-boy
11-07-2006, 09:45 PM
8200 rpm
13Bracer
11-07-2006, 09:58 PM
i gtot a prelude shit redlines just before 7500
ill get a pic in a sec
§treet_§peed
11-07-2006, 10:00 PM
Just end your life...:goodjob:
13Bracer
11-07-2006, 10:02 PM
http://www.importatlanta.com/upload/files/304/mph.jpgsee
§treet_§peed
11-07-2006, 10:13 PM
that's at almost 6k exactly...not redline...:goodjob:
K24cb7coupe
11-07-2006, 10:16 PM
the prelude redline is 7500, the prelude header will not bolt up to accord exhaust 3 bolt to a 2 bolt.
13Bracer
11-07-2006, 10:18 PM
that's at almost 6k exactly...not redline...:goodjob:

yeah i know this its the only pic i have of the tach and it shows were they redline at! but hey it was in V-TEEEECCCCCC!!HAHAH:goodjob:
§treet_§peed
11-07-2006, 10:21 PM
eh...
13Bracer
11-07-2006, 10:23 PM
eh...

AHAH thats what i say about it
an0therh22
11-07-2006, 10:37 PM
hey u got any pics of ur h22 swap? i need to see where ppl ran the power steering because mines keep rubbing on my hood and theres a a chunk of the medal missing
§treet_§peed
11-07-2006, 10:50 PM
lol his is not a swap..his car came with that motor
13Bracer
11-07-2006, 10:51 PM
lol his is not a swap..his car came with that motor

hahah was he talkin to me? i dont know i dont think so...fuck who knows?:screwy: :thinking:
§treet_§peed
11-07-2006, 10:56 PM
i'm pretty sure it did...DOCH V-ATTACK right? ane you said wht year sh lude?
BimmerMan
11-08-2006, 01:17 AM
it's a manual... So what's the deal cause I've heard 8200 before and this guy with 7500. It is a JDM H22A btw.

hey u got any pics of ur h22 swap? i need to see where ppl ran the power steering because mines keep rubbing on my hood and theres a a chunk of the medal missing
I'll try to get some pics of it. I know i've noticed that somebody shaved some metal off of the pump.

the prelude redline is 7500, the prelude header will not bolt up to accord exhaust 3 bolt to a 2 bolt
So do i need a custom exhaust If I want an exhaust on there??
§treet_§peed
11-08-2006, 04:36 PM
you shouldnt need a custom exhaust..just search for one on ebay that goes with your motor... but as you can see, there a three of them...

H22A 2.2 16V DOHC VTEC PGM-FI 2157 220hp@7200rpm 163tq@6500rpm '97-'01 Prelude SiR (JDM)
H22A 2.2 16V DOHC VTEC PGM-FI 2157 200hp@7000rpm 156tq@5250rpm '99-'01 Prelude (USA)
H22A 2.2 16V DOHC VTEC PGM-FI 2157 200hp@7200rpm 163tq@6500rpm '97-'01 Prelude Type-S (JDM)
BimmerMan
11-08-2006, 06:47 PM
you shouldnt need a custom exhaust..just search for one on ebay that goes with your motor... but as you can see, there a three of them...

H22A 2.2 16V DOHC VTEC PGM-FI 2157 220hp@7200rpm 163tq@6500rpm '97-'01 Prelude SiR (JDM)
H22A 2.2 16V DOHC VTEC PGM-FI 2157 200hp@7000rpm 156tq@5250rpm '99-'01 Prelude (USA)
H22A 2.2 16V DOHC VTEC PGM-FI 2157 200hp@7200rpm 163tq@6500rpm '97-'01 Prelude Type-S (JDM)

Actually it's an OBD I engine so no it's none of those. So are you trying to say to get an exhaust for a Prelude? is the fitment the same or does it have to be modified?
K24cb7coupe
11-08-2006, 06:56 PM
just take the exhaust you buy to a muffler shop and have them weld in the correct peice you need. About the redline 7500 is keeping it safe if you start reving your internal stock motor past this you will be ending your motors life early.