PDA

View Full Version : R32 Conversion


AZN_Pride
11-06-2006, 05:59 PM
What all do you need for the R32 conversion on a 93 240sx? I found someone with a bumper, hood, and quarter pannels for 100. He says that all I need is the lights. Is there anything else I need?
i4_garage
11-06-2006, 06:11 PM
fenders?
AZN_Pride
11-06-2006, 06:14 PM
Yea. The fenders.
i4_garage
11-06-2006, 06:32 PM
i believe it just bolts right up ... have seen one on here a while back maybe cutting and trimming here and there but its stragiht forward
2.0civic
11-06-2006, 06:33 PM
no offense but if you dont know the difference in a QP and a fender, i dont think you are mechanically inclined enough to do the conversion....kinda like honda people with "headers"....:2cents:
AZN_Pride
11-06-2006, 06:38 PM
Ummm ok.......Its what I am used to hearing in Memphis.I aprreciate the insult.
Z U L8R
11-08-2006, 10:13 AM
the fenders and hood will bolt up however they will stick out ( like wide body) about a half inch or so. the front bumper will take a little engineering to make it stable and you will have to make supports for the headlights. last r32 front conversion i did i went to home depot and got the steal with the holes in it that's pretty sturdy yet you can bend also, and with those and some extra nuts and bolts i made pretty sturdy supports for the lights and bumper to bolt up to. you'll have to do a little rewiring for the lights, it's all basic wiring. but in any case it's much cheaper than getting an r32 front clip, cutting the core support and welding the headlight brackets etc.
HeLLo iM iZzY
11-08-2006, 05:29 PM
I see a red one in L'ville all the time and he has a R32 conv on his 240sx.
sebastianHoff
11-09-2006, 11:10 AM
you need a knife,


to remove your testicles.
yudalicious
11-09-2006, 06:51 PM
+fenders - quarter panels if you want the front conversion + tons of custom work and/or money = then you know why people don't do it more often
2.0civic
11-09-2006, 07:02 PM
no offense but if you dont know the difference in a QP and a fender, i dont think you are mechanically inclined enough to do the conversion....kinda like honda people with "headers"....:2cents:


wasnt insulting you man....order widebody fenders then order widebody QP's and if you confuse the two, you would be out some money
§treet_§peed
11-09-2006, 10:19 PM
APC sticker FTW!!!!!