PDA

View Full Version : 1-Piece Halos


92tegracer07
10-30-2006, 08:49 AM
i recently installed the one piece black housing halos on my integra and i love the look...problem is i washed my car this weekend and one of the headlights has a lot of condensation built up in it...will this go away or did i f-up my lights?
brads94accord
10-30-2006, 08:55 AM
you probably are gonna wanna take it apart again to get the condensation out, then make sure you seal it up well with silicone.
92tegracer07
10-30-2006, 08:57 AM
ok...any other alternatives? getting those fuckers in there was a bitch....
HvyArms
10-30-2006, 09:26 AM
ok...any other alternatives? getting those fuckers in there was a bitch....

Go out and buy an actual BMW?
JDMBeau
10-30-2006, 05:09 PM
no that is the only alternative. those lights are cheap for a reason...cause they leak.
allmotoronly
10-30-2006, 05:22 PM
no that is the only alternative. those lights are cheap for a reason...cause they leak.

ricer headlights FTL!!!
§treet_§peed
10-30-2006, 11:28 PM
i used to have a set of halo's on my 96 civic..the problem with most aftermarket head lights oem style or not is they are sealed poorly when they are made at the factory..beleive me i know i have been thru 2 sets of halo head lights and now i have a set of oem 99-00 Si headlights and they all have leaked on me...the best thing to do is take them out..remove all rubber..put them on a pan..pre heat oven to 200 degrees..bake for 8-10 minutes..then take apart..besure to dry them out really really good and let them sit took apart over night if at all possible..then go buy some real good sealant..i got this fire resistant cocking that you use on fire places because the ehat from your motor will weakin the coucking...so anyways put a thick line of it on them put them back together..preheat your oven to 200 degrees again then set them in there for 10 minutes...pull them out and push the together like hell and if possible set something on them over night...that is a highly recomended thing do to so as the coucing will cure..i left mine out for 3 days and nights...also i did mine one at a time... refer here if you need more help...it is for civic headlight, but same concept... also since you are jsut wanting to take them apart and not paint them, disregardthe painting part.... http://honda-tech.com/zerothread?id=282131
1SwollDude
10-31-2006, 12:36 AM
^ had to do that with my eclipse lights..really does work
92tegracer07
10-31-2006, 07:31 AM
thanx everyone!!! +1 for the help....
§treet_§peed
10-31-2006, 10:25 AM
i didn't see a +1 on my shit...lol
92tegracer07
10-31-2006, 10:45 AM
i didn't see a +1 on my shit...lol

my bad..im workin on it...lol