cost to rebuild

[boostedb16]

what does it cost to have a turbo rebuilt, oil is coming out of the side where the filter goes.

[babowc]

im gonna buy my own repair kit for 90 bux..
and ship it back to the seller for balancing for free (minus shipping)

usually, shops cost upwards of 300-400 per.

[EmminoDaGreat]

are you sure you dont have an oil leak somewhere and its getting sucked in there? It might just be residue from an oil leak on your engine... since the turbo spins its balls off and sucks everything/anything in...

[B18c1Turboed]

You can go to Turbo Disel Injection in forest park and buy new bearings and C clips and thrust Bearings pretty Cheap.
They also do wheel balance for 38.00 and have it back too you the next day!!

Rebuilding turbo is super easy and cheap also!

[Vteckidd]

usualoy to have a shop do it it runs $250-350 for a NON BALL BEARING turbo

[boostedb16]

are you sure you dont have an oil leak somewhere and its getting sucked in there? It might just be residue from an oil leak on your engine... since the turbo spins its balls off and sucks everything/anything in...yes im sure now because i had a leak around the distibutor and thought that was it but i had that fixed and wiped the turbo off real good and reved it with my hand and watched it and oil started to come out, before i had my return line changed and put the wrong size on and my car smoked like crazy and fixed that problem then this started.

[Yellow2]

you should be able to get out of the shop for under $300 depending on brand/model. I know my KKK27 turbo coasts around $450 for a center cartridge alone, but something like a Garrett Gt35 or something could be rebuilt for $250 at most shops.

[boostedb16]

ok well i picked up buckys t3/t4 turbonetics tonight so i will probably just sell that one and tell people whats wrong with it, i mean it dont leak that bad its just i hate any kind of oil leak, oh and its a turbonetics t3 if that helps on the cost of fixing.