View Full Version : Timing Belt Job on my car $$$$$$$$$$
lsxtreme
10-29-2006, 12:03 AM
I will pay anyone who is mechanically inclined to fix my timing belt,,
the story goes..... I've Jumped timing.. and as you know i'm not mechanically inclined and i dont even wanna touch this thing..
setup is .. skunk2 ajustable cam gears/stock timing belt. and you know the rest
i'm located in kennesaw, GA but i will be working 2morrow 7am-12pm SUnday.. but if you want this job you can call me ASAP dont kare want time it is.. as long as you can get the car running right......... b4fore i test drive it .. then your all good and you go home $100 happy maybe more lmk some ASAP..
Vick
404 429 3009
car is located in my garage.... and cannot be driven.. thanx
luthi
10-29-2006, 06:42 AM
100, in kennesaw and it jumped time? you may have much bigger problems than just your ridiculous price. You may have bent valves.
lsxtreme
10-29-2006, 11:03 AM
thanx for the comments but i got it fixed..
and thanx mccoy for the help lastnite..
lsxtreme
10-29-2006, 08:09 PM
aww f***k this shT .. got everything all in place and everything test drove it .. for about 10 minutes and everything was fine.. washed the car and did some detailing again .. and started her up and hmmmm.............. it jumped timing again wtf.........
*looked at it again.. and the spring tensioner is hella loose and comes to the point where its not even holding up the tensioner pulley.. and prolly the bearings or wat not is gone on the tensioner...... and i dont wanna mess with it no more i've done everything by the book and done this 3 times.. and same thing happened .. started fine and everything .. give it a little gas and boomb jumped timing again.. and i'm 4sure the valves are not bent.. and i'm 99.9% sure on that..
Attn: Shops best price quote gets to work on my car..
aaronfelipe
10-29-2006, 08:35 PM
My guess is that the tensioner was not adjusted right.
green91
10-29-2006, 09:40 PM
a bad bearing in the tensioner wont make it lose tension y0
Annihilation
10-30-2006, 12:37 PM
maybe ur belt is too old...when did u last replace it....
lsxtreme
11-02-2006, 07:57 PM
replaced timing/waterpump 1/2 yr ago.. but i'm fixing to rebuild the beeoch up again.. and torment the beeoch to it's very breath.. hahaha
VVRRRRRRRRROooooooooooOMMMMMMMMMMMMMMMMM
VVRRRRRRRRROooooooooooOMMMMMMMMMMMMMMMMM
EEERRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRrrrrr
vvvvvvvVVVVVVVVVVVVVVTTTEEEeeeeeeeeeKKKKKKKKKKKKKK KKKKKKKKKKKKKKKKKKKKKKKKKKK
japan4racing
11-03-2006, 12:34 AM
is this a joke???? a retarded circus monkey snorting drano could set the timing on a honda.
AndyMac004
11-03-2006, 06:43 PM
is this a joke???? a retarded circus monkey snorting drano could set the timing on a honda.
ur living proof of that right?
VVRRRRRRRRROooooooooooOMMMMMMMMMMMMMMMMM
VVRRRRRRRRROooooooooooOMMMMMMMMMMMMMMMMM
EEERRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRrrrrr
vvvvvvvVVVVVVVVVVVVVVTTTEEEeeeeeeeeeKKKKKKKKKKKKKK KKKKKKKKKKKKKKKKKKKKKKKKKKK
WTF?:screwy:
2.0civic
11-04-2006, 02:36 PM
is this a joke???? a retarded circus monkey snorting drano could set the timing on a honda.
essentially....
lsctreme, did you ever find out what the problem was?
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.