Log in

View Full Version : Noob question.... Sorry....


TRUTH
10-27-2006, 07:09 PM
Ok... I expecting my B18 C1 to be delivered any day... the guy said its a 93 GSR motor... well as a gift my boy in new york sent me the red valve cover off his 2001 teg will it fit? :thinking:
1insaneR
10-27-2006, 07:22 PM
yes
TRUTH
10-27-2006, 07:51 PM
thanks bro
ATL86
10-30-2006, 11:46 AM
Um, a 93 GSR motor is a B17A, not a B18C1. You need to confirm which motor it is, because an ITR valve cover will not fit a B17A.
collins
10-30-2006, 11:58 AM
^^^ he beat me to it.
18lbhatch
11-04-2006, 07:06 PM
I concur. If its a B17 you better hold on to that cause its rare.
2.0civic
11-04-2006, 07:08 PM
Um, a 93 GSR motor is a B17A, not a B18C1. You need to confirm which motor it is, because an ITR valve cover will not fit a B17A.
since when is a b18c1 a itr VALVE COVER
BTLFED
11-04-2006, 07:14 PM
since when is a b18c1 a itr VALVE COVER

What are you talking about? Let me clairify through the use of BTLFED Notes:

-The author said it was a "93 B18C1 GSR"
-In 1993, the GSR engine was a B17A1
-An ITR Valve Cover will fit a B18C1 GSR but not a B17A1 GSR
-You come from left field with this comment that makes no sense because no one said that.

/Notes
Vteckidd
11-04-2006, 07:56 PM
actually everyones wrong.

B18C1=USDM GSR
B18C or B18C5=ITR
93 GSR= B17A

but to answer the posters question, YES THE VALVE COVER WILL WORK. ALL DOHC VTEC VALVE COVERS ARE INTERCHANGABLE
2.0civic
11-04-2006, 07:58 PM
What are you talking about? Let me clairify through the use of BTLFED Notes:

-The author said it was a "93 B18C1 GSR"
-In 1993, the GSR engine was a B17A1
-An ITR Valve Cover will fit a B18C1 GSR but not a B17A1 GSR
-You come from left field with this comment that makes no sense because no one said that.

/NotesGUY I QOUTES RANDOMLY SAID BSR MOTOR WONT FIT B17 WHICH THREAD CREATOR NEVER SAID IT WAS A TYPE R VALVE COVER
BTLFED
11-05-2006, 01:58 AM
GUY I QOUTES RANDOMLY SAID BSR MOTOR WONT FIT B17 WHICH THREAD CREATOR NEVER SAID IT WAS A TYPE R VALVE COVER

FYI-The Type R valve cover is the only one that comes red. :slap:
BTLFED
11-05-2006, 01:59 AM
actually everyones wrong.

B18C1=USDM GSR
B18C or B18C5=ITR
93 GSR= B17A

but to answer the posters question, YES THE VALVE COVER WILL WORK. ALL DOHC VTEC VALVE COVERS ARE INTERCHANGABLE

I'm not wrong, I was using my BTLFED Notes to reiterate on what everyone ELSE was saying.
Vteckidd
11-05-2006, 02:00 AM
lol we are all fucking confused
BTLFED
11-05-2006, 02:11 AM
lol we are all fucking confused

I'm not confused, I'm hammered.
JDMJAYDC2
11-05-2006, 09:46 AM
what year integra is this going in
Dirty Octopus™
11-05-2006, 10:05 AM
I concur. If its a B17 you better hold on to that cause its rare.
rare... true
but id rather have a 1.8 over a 1.7. but thats just me :dunno:

BRB, The One That Does a Haduken in a Gun battle :bump:
TRUTH
11-05-2006, 08:58 PM
what year integra is this going in

92 civic hatch
Elbow
11-06-2006, 12:10 PM
I am confused but good luck!
ash7
11-06-2006, 12:52 PM
i was going to read this post in hopes of understanding what was going on at the last post... but here i sit, thoroughly confused. All I'm reading here is a bunch of "I KNOW HONDAS BETTER THAN YOU DO" crap.

I like the BTLFD notes, they make more sense than anything else on this page.
sir2hb
11-07-2006, 09:40 PM
Iam not saying Iknow hondas better ,BUT

some one said b18C b18c5= itr
there were actually JDM gsrs that had a B18C from 93 up so It could be a 93 JDM SIR-Vtec motor but not a 93 Usdm B18c1 (didnt exist)
the ITR, CTR, and GSR from 94 up were all stamped p-72 and all the heads and valve covers will interchange as said before

The engines in japan were build a year before they were put in the car.
Anyone with a stock 94 GSR too go look at the head stamp it will prolly say 93
sir2hb
11-07-2006, 09:42 PM
Hell you can find integra in japan that had a d15b carb in them
Jdm94Coupe
11-07-2006, 10:28 PM
the ITR, CTR, and GSR from 94 up were all stamped p-72 and all the heads and valve covers will interchange as said before

thats wrong....... how do u figure itr and ctr's were stamped p-72.... you're losing it!! get it together!!!!!!!!
§treet_§peed
11-07-2006, 11:12 PM
END THIS THREAD PLEASE
TRUTH
11-08-2006, 12:04 AM
Ok guys the motor is gonna be here tomorrow... I talked to the guy who shipped it and he said its a JDM 93 GSR... not USDM... but i will definately post what it is tommorow..... Thanks for allthe help....
TRUTH
11-09-2006, 08:03 AM
Ok the engine code reads b18c so definately a jdm gsr 93.... But ok..... So what parts do I get for it... Should I just go with 94 b18c1 parts usdm?