Post Your Mini Truck

[bdydrpdmazda]

We have post your everything else on IA so lets give the Mini Truckers a chance, Ill go first but keep in mind I have only started ordering parts for mine and havent gotten to start on it yet...

http://i82.photobucket.com/albums/j244/clintonmanning/f1_12.jpg

[Sammich]

dang i dnt feel so bad now LOL


when i first got it...

http://i45.photobucket.com/albums/f73/integra_hot/Whips/daytime20b4.jpg


w/ the 3in block and overload spring gone w/ the 18s i just sold...

http://i45.photobucket.com/albums/f73/integra_hot/Whips/Image_01.jpg

here are my integra seats that i installed...

http://i45.photobucket.com/albums/f73/integra_hot/Whips/seats1.jpg

starion wheels...and this is where i stand at the moment..

http://i45.photobucket.com/albums/f73/integra_hot/Whips/yota6.jpg

[bdydrpdmazda]

I love that style toyota, I was looking for an 85 Xtra cab when I found my Mazdawg. When are you gonna bag it or juice it?

[bdydrpdmazda]

I love that style toyota, I was looking for an 85 Xtra cab when I found my Mazdawg. When are you gonna bag it or juice it?

[Sammich]

i want to bag it by mid next year...thats if everything goes correctly. right now im in the process of paying off a credit card...then shredding that bastard up...i hate credit cards

[bdydrpdmazda]

You can bag it with a really good bag set up and 4 link the rear for under $2,000. I have been doing alot of research on www.suicidedoors.com getting prices for everything Im gonna need to lay the rockers on the ground and it looks like Ill be able to get everything I need suspension wise for under $2250.

[Sammich]

i was tryna spend 1500 max...2250 is up there but u pay for ur price i guess

[bdydrpdmazda]

try www.masterimagecustoms.com www.airbagit.com or www.masterimagecustoms.com when you get ready to buy your stuff and Im sure you can get it done without breaking your limit, you can probably find a kit for around $1,000 and a 4 link for the back for about $400 then you just have to flip the ball joints on the front. You will never get it done without breaking the bank unless you do it yourself though, its better that way anyway. I bagged my first truck without any knowledge of what I was doing in less than two weeks and I never had a problem.

[bdydrpdmazda]

where are all the other mini truckers at, I know we have never finished and fatboyV8

[atlrolla19]

here is my old tahoe, i know its not a mini but hell its bagged.

[Sammich]

try www.masterimagecustoms.com (http://www.masterimagecustoms.com/) www.airbagit.com (http://www.airbagit.com/) or www.masterimagecustoms.com (http://www.masterimagecustoms.com/) when you get ready to buy your stuff and Im sure you can get it done without breaking your limit, you can probably find a kit for around $1,000 and a 4 link for the back for about $400 then you just have to flip the ball joints on the front. You will never get it done without breaking the bank unless you do it yourself though, its better that way anyway. I bagged my first truck without any knowledge of what I was doing in less than two weeks and I never had a problem.

thanks for the info:goodjob:

[Mad Mike]

I see spiner hub caps on the trailer. Thats pimp... but serioslly nice trucks I wish I would of keep my mightymax. (had a really bad few months and had to sell it:()

[bdydrpdmazda]

I meant to put www.suicidedoors.com on there instead of putting two master image customs for those links.

[gijoe0720]

here is some of my dodge. gettin it painted right now. also i have some black 20's instead of the chrome 18's. also it lays frame now.

[Sammich]

3posting minitruckers...two layin desolate...nice job BTW

[.::UNKNOWN::.]

i got rid of my money sucking project 88 s10 bc me and my wife are going to build this with these rims will keep yall posted on how it comes along

[Sammich]

nice an extreme blazer...dnt see those TOO often

[.::UNKNOWN::.]

nice an extreme blazer...dnt see those TOO often appreciate it i told her that i would take the rims off the 88 and put on hers and sell the 88 if she got one and she came home one day and said hey honey look what i got

[Sammich]

LOLz...happily suprised at first or pissed??

[.::UNKNOWN::.]

kinda pissed bc that was my first thing i modified and as you can tell the mini trucker side ran over to the prelude i hate all bumps in the road and me and speedbumps really hate each other

[mitsu246]

Here is my blazer
http://xclusive-images.com/images/shows/2006/nopi%202006/trucks/DSC_9899.JPG

[EX-Svic]

who does bags in GA? i want to bag my 4dr 96 blazer.

[never_finished]

here's mine...ill post some more pics later.

[Sammich]

kinda pissed bc that was my first thing i modified and as you can tell the mini trucker side ran over to the prelude i hate all bumps in the road and me and speedbumps really hate each other

LOLz thats what i figured woulda happened

[Sammich]

Here is my blazer
http://xclusive-images.com/images/shows/2006/nopi%202006/trucks/DSC_9899.JPG

thats nice:goodjob:

[Sammich]

never finished has one of the few step sided trucks i really like..

[kfzemx3]

who does bags in GA? i want to bag my 4dr 96 blazer.

GodFather customs did mine back in 2k when i was rawking the mitsubishi mighty max.

I miss that truck i wonder what ever happen to it if anyone see's one with a phantom front grill, silver tribal flame job on a jade green paint job let me know ! I might wanna buy it back and finish what i started since i had to sell it when i was going in the navy

[mitsu246]

endless does really nice work but let me give u some advice blazers are hard work.

[EX-Svic]

yep blazer are hard work but look nice when laying frame and the body desing. at least i like them . http://www.importatlanta.com/upload/files/104/BlzeFront.jpg ill get the whole car on pic ltr.

[never_finished]

here are some more...i put my buddies 18's on for a couple days.

[mitsu246]

I have to get those 18s. Thats the ones I been looking for. And no cutting for me to lay out.

[chris13]

i always wanted a mini truck, wish i could find one for sale

[The Green Monster]

here are some more...i put my buddies 18's on for a couple days.


pure sex w/ those wheels!!!:goodjob: :goodjob: :goodjob:

[Jimmy B]

heres my garage... and my brothers S10... i didnt post my dropped burban...

by the way.. the mazda is for sale.. 100 bucks takes it, adn all the parts

[bdydrpdmazda]

Damn, I didnt realize we had so many folks into airbags on here, good shit fellas.

[smokinblackneon]

i always wanted a mini truck, wish i could find one for sale
Ive got a 86 nissan hardbody reg cab that I need to sell I just put bucket seats in it I have a set of 15inch pathfinder wheels on it and have a set of 14 inch cromes for it to. it is posted in the cars for sale section some where. I really need it gone im about to move and need the cash.

[Ericp]

if I can find some pics of my old 03 Xtreme I'll post them up

[Sammich]

ive always loved those thrust wheels..they set ur s10 off..

i just got my tonneau cover hopefully ive have it on by the end of the wk

[Jimmy B]

i wish i could have a bagged truck for everyday use.. if i dodnt drive outa town so much, and pull a atrailer, i would be in heaven! lol

[gijoe0720]

Here are some pics of my 20" wheels, mirrors, and headlights I just got for my truck.

Also on my truck I have shaved door handles, shaved antenna, shaved tail lights, roll pan with LED's, checkmate tonneau cover, cervini's grill and cervini's ram air hood, 20" Black Rhino Black Slam wheels, 1 piece headlights with black housing, and new mirrors. For the bag kit I have 2 5 gallon tanks, 2 Viair 460 compressors, 1/2 line, 8 xtreme 250 valves, 2800 contitech bags in the back, 2500 firestone in the front, 8" notch, four link, and a 10 switch switchbox.

I think that is all I have right now.

[Sammich]

whos the dim wit who takes a pic of his foot and blocks out his face w/ the camera phone LIRL..j/k

20s look nice..

[gijoe0720]

whos the dim wit who takes a pic of his foot and blocks out his face w/ the camera phone LIRL..j/k

20s look nice..


Thanks and that would be me

[bdydrpdmazda]

I wish I could fit 20s on the Mazdawg, cant do it and body drop it though, I would rather have the body drop and go with 18s. S10s can be body dropped on 22s if you know what your doing though and that is total hawtness.

[gijoe0720]

I plan on body droppin my dodge some day.

[bdydrpdmazda]

you got a D50 or a Dakota?

[gijoe0720]

dakota

[Jimmy B]

I wish I could fit 20s on the Mazdawg, cant do it and body drop it though, I would rather have the body drop and go with 18s. S10s can be body dropped on 22s if you know what your doing though and that is total hawtness.

nope... your wrong man.. you can do it on 20s quite easiely.. i set up my shell for 21's all the way around... and as long as its not a huge b/d, you can put 22's in the back... (2.5 bodydrop lays the rockers on the ground hard..

[gijoe0720]

what exactly do you have to do when you body drop a truck?

[Sammich]

hey jimmy B im hoping to get soem axis hagens for my truck(19s) from philly thanksgiving w/e..

[bdydrpdmazda]

Ive seen some Nissan hardbodys on 22s, its fucking nuts.

[Sammich]

^^tell me bout it...shiz is sick

[bdydrpdmazda]

nope... your wrong man.. you can do it on 20s quite easiely.. i set up my shell for 21's all the way around... and as long as its not a huge b/d, you can put 22's in the back... (2.5 bodydrop lays the rockers on the ground hard..

Im going for a 3.5 body drop though and 2.5 chop top, Im gonna trim the rockers a little so I can get that much lower.

[Jimmy B]

there are 2 ways to body drop a tuck, i wont go into detal cuz it would take all night..

traditional b/d is when yoou cut the floor of the cab/bed at the corners, and let the cab/bed slide down a certain ammount, then weld the floor back in the said amount of your bodydrop.. usually around 2.5-3.5 inches...
your result is the cab and bed (the whole body) apear lower than it is from the factory, usually the body lays on the ground..

stock floor b/d is when you build a whole new frame from the firewall back, that is smaller in height than the stock frame, so the body sits on the ground without cutting the floors out...


PBS,... i like those wheels

[Jimmy B]

Im going for a 3.5 body drop though and 2.5 chop top, Im gonna trim the rockers a little so I can get that much lower.

go for a 3inch bodydrop and 20's! it sets the truck off so much better!!

[gijoe0720]

Ive seen some Nissan hardbodys on 22s, its fucking nuts.


..

[bdydrpdmazda]

^^Tuckin nuts, thats where its at.

[Jimmy B]

yea... that truck is SICK... someone should buy my truck.. i mean.. the frame is set up for 21's.. it would be a easy rebuild..

[bdydrpdmazda]

My wife says I can do whatever I want to the truck as long as it has A/C. Ive got a real challenge on my hands with that one.

[gijoe0720]

yea... that truck is SICK... someone should buy my truck.. i mean.. the frame is set up for 21's.. it would be a easy rebuild..


how much you want? I may know some people who might want it.

[gijoe0720]

My wife says I can do whatever I want to the truck as long as it has A/C. Ive got a real challenge on my hands with that one.


Haha. Right now I am takin everything I don't need out and movin everything off my fender wells so I can cut them out and in the process of takin my a/c out. I just gotta find out how to get the a/c hoses outta the firewall.

[bdydrpdmazda]

I dont want anything I dont need but shes paying for everything so I guess the A/C will have to stay, you know how women are about their A/C, rollin down the windows isnt good enough.

[Jimmy B]

how much you want? I may know some people who might want it.

hundred bucks... with all the panals and the engine too..

[gijoe0720]

I dont want anything I dont need but shes paying for everything so I guess the A/C will have to stay, you know how women are about their A/C, rollin down the windows isnt good enough.


true. you wouldn't happen to know how to get the a/c hose outta the firewall would ya? Whenever I took a/c off my integra I just cut the hoses but I don't want to do that to my truck

[gijoe0720]

hundred bucks... with all the panals and the engine too..


hell I may be interested in it for that. But i will ask around.

[Jimmy B]

you un-hook them from the back of the engine,... and connect them to themselves.. so it goes out of the engine, then right back in.. BUT.. you wont have heat then!

[Jimmy B]

er.. thats for the heater hoses....

for the ac, not sure other than unbolting everythign, and then pulling it out

[gijoe0720]

you un-hook them from the back of the engine,... and connect them to themselves.. so it goes out of the engine, then right back in.. BUT.. you wont have heat then!


don't matter heat don't work anyways

[bdydrpdmazda]

true. you wouldn't happen to know how to get the a/c hose outta the firewall would ya? Whenever I took a/c off my integra I just cut the hoses but I don't want to do that to my truck
No I bought my truck while Im here in Iraq and I havent got a chance to tear it down yet, all Ive done is start ordering the parts, the last truck I built was an S10 and thats a whole different ballpark.

[gijoe0720]

Hey Jimmy could you PM me your number? I just told one of my buddys about your truck and he asked if I had your number.

[Ericp]

My old 03 Xtreme:

http://i39.photobucket.com/albums/e161/EricPartin/ScannedImage-2.jpg

http://i39.photobucket.com/albums/e161/EricPartin/ScannedImage.jpg

20" Panther 5 Series, 20" Spintek Stunners

http://i39.photobucket.com/albums/e161/EricPartin/ScannedImage-3.jpg

[Sammich]

there are 2 ways to body drop a tuck, i wont go into detal cuz it would take all night..

traditional b/d is when yoou cut the floor of the cab/bed at the corners, and let the cab/bed slide down a certain ammount, then weld the floor back in the said amount of your bodydrop.. usually around 2.5-3.5 inches...
your result is the cab and bed (the whole body) apear lower than it is from the factory, usually the body lays on the ground..

stock floor b/d is when you build a whole new frame from the firewall back, that is smaller in height than the stock frame, so the body sits on the ground without cutting the floors out...


PBS,... i like those wheels

thats what i hope to be going for a SFBD

thanks..i maybe selling my solobarics to get them, but itll be worth it:yes:

[chris13]

any of yall know if anyone has a bagged truck for sale?

[Cato ED-6]

My S-10. Currently working on it. (Sorry if my pics are to big.)
http://i21.photobucket.com/albums/b300/CantiLOTBF/My%20Cars/S10.jpg

http://i21.photobucket.com/albums/b300/CantiLOTBF/My%20Cars/350-S10.jpg

http://i21.photobucket.com/albums/b300/CantiLOTBF/My%20Cars/InsideS-10.jpg

[atlrolla19]

I have a bagged truck for sale, its a 1996 chevy s10 ext cab full show it has been stock floor bodydroped the frame has been custom built from the firewall back 20 in boyd coddigton harms with 245/35 tires it has full sheetmetal dash, fiberglass door panels,custom speaker boxes all painted to match truck BAD sterring wheel.summit 355 crate motor all billet acc. cam, pete jackson gear drive, headers. truck sounds awesome!!! turbo 350 tranny.the bed floor and bed walls have ben all smoothed out and painted. firestone airbags at all four corners 3/8 vavles and 1/2 airline engine driven air comp.the truck has been completely shaved suiced doors,sliding rag,ss mirrors,2002 ford ranger edge bumper moulded up front 98 grille and headlight swap,wheel tubs front and rear,autometer gauges,fuel cell.the truck is ultra blue pearl with pollished silver tribal airbrushed down the sides.and much more too much to list...lots of hours in this truck. the truck has been featured in mini truckin in aug 04 and was cover for street source mag last month and has also been shot for sport truck and minitruckin once again those features should be coming out soon,,

[Sammich]

any of yall know if anyone has a bagged truck for sale?

never_finished has a completed step side sdime for sale..sexiest s10 ive ever seen:yes: and i generally dnt like em

[atlrolla19]

pics

[Slowboy]

Nice man^^^ very clean.

[atlrolla19]

thanks

[Slowboy]

Some reason mini trucks been getting to me. I wouldnt mind picin one up an baggin it. or baggin one of my ef;s lol. just for the fun of it.

[Sammich]

Some reason mini trucks been getting to me. I wouldnt mind picin one up an baggin it. or baggin one of my ef;s lol. just for the fun of it.

dnt bag a honda..its against the religion LOL

get a mini..if u try to bag the EF..ill sell u my truck for the love of hondas and respect of minitruckin lol..and ill kill a nigga for messin w/ my truck s0n:yes:

[chris13]

I have a bagged truck for sale, its a 1996 chevy s10 ext cab full show it has been stock floor bodydroped the frame has been custom built from the firewall back 20 in boyd coddigton harms with 245/35 tires it has full sheetmetal dash, fiberglass door panels,custom speaker boxes all painted to match truck BAD sterring wheel.summit 355 crate motor all billet acc. cam, pete jackson gear drive, headers. truck sounds awesome!!! turbo 350 tranny.the bed floor and bed walls have ben all smoothed out and painted. firestone airbags at all four corners 3/8 vavles and 1/2 airline engine driven air comp.the truck has been completely shaved suiced doors,sliding rag,ss mirrors,2002 ford ranger edge bumper moulded up front 98 grille and headlight swap,wheel tubs front and rear,autometer gauges,fuel cell.the truck is ultra blue pearl with pollished silver tribal airbrushed down the sides.and much more too much to list...lots of hours in this truck. the truck has been featured in mini truckin in aug 04 and was cover for street source mag last month and has also been shot for sport truck and minitruckin once again those features should be coming out soon,,


PMed

[hemi]

Does this one count?

[Sammich]

funny nigga..come race the yota..:ninja:

[atlrolla19]

more pics of my s-10 taken today

[never_finished]

^^ looks good, when did ya get that truck? saw it at layd out at the park earlier this year in tennessee. I want those wheels!!!!

[CRVTech]

http://i5.photobucket.com/albums/y157/TgerLilyXx/IM000424.jpg
That's what it looked like when I brought it home. Ultimate gayness. (No, I DID NOT put the flames on it, that was the work of the idiot previous owner.)
And this is now... Don't really have any good pictures of it on the laptop. It pretty much looks like shit anyway since it's in a billion pieces....but it's still better than before.
http://i5.photobucket.com/albums/y157/TgerLilyXx/bodydrop.jpg


http://i5.photobucket.com/albums/y157/TgerLilyXx/truck-1.jpg

[atlrolla19]

wow looks like shit still and its been over a year haha

[CRVTech]

wow looks like shit still and its been over a year haha

....Right. Always have something to say, don't ya? :goodjob:

[atlrolla19]

I sure do when you say something first...qutoe"(No, I DID NOT put the flames on it, that was the work of the idiot previous owner.)" you always gotta be a smart ass and you always think your better than everybody else...

[Sammich]

im tempted to sell my yota..

[CRVTech]

I sure do when you say something first...qutoe"(No, I DID NOT put the flames on it, that was the work of the idiot previous owner.)" you always gotta be a smart ass and you always think your better than everybody else...

Actually, I didn't know you put the flames on it until right now. You told me it was like that when you bought it, and that you thought it was stupid too. I don't understand what your hang up is with us and this damn truck. You say it looks like shit but you were all over us trying to buy it once we had fixed the bag setup. And, yeah, it's been a year but we have more important things to worry about than a truck. You know, jobs and getting married and paying for said wedding and my grandmother being in a horrible car accident, oh and like the six times we've had to deal with your bullshit. I really wish you would just leave us alone. You always start shit, apologize for running your mouth, months go buy and then you start the cycle all over again. WE DO NOT LIKE YOU. YOU ARE THE FARTHEST THING FROM OUR MINDS. You claim to "hate" us, if you hate us then treat us like we do you. IGNORE US. Thank you very much.

[Sammich]

i gota get my pics of my spindle drop