View Full Version : Power Mods BOV size? Turbosmart Dual Port
Have GTI 1.8T. I don't want to vent straight to atmosphere because I don't want to run rich because of the MAF sensor. SO I plan to buy a Turbosmart Dual port and recirculate most of my air. Here is my question
They sell a kompact series valve they reccomend for audis/vdubs. Is there any problem with buying the regular size dual port? What size in terms of mm would I need to get? Like 38mm or what?
I think this is an easy question, someone help me out.
green91
10-31-2006, 07:48 PM
You could also get a SAFC and use fuel correction with it so it venting to atmosphere wont affect it and run any BOV you want
Spyder
10-31-2006, 07:48 PM
Pull out your recirculator valve and measure it, if I remember right mine was about 25mm (1 inch) when I was redoing some hose that was dry rotted.
Pull out your recirculator valve and measure it, if I remember right mine was about 25mm (1 inch) when I was redoing some hose that was dry rotted.
Okay, it's just the diamerter of the recirculator valve. Simple enough I saw the mm listed next to the product and was wondering what it measured. Appreciate the help.
Spyder
11-01-2006, 09:51 AM
You could also get a SAFC and use fuel correction with it so it venting to atmosphere wont affect it and run any BOV you want
Jetta=Euro which means shit never works right, they just recently released a SAFC (safc select)that would even work on the car and it hasn't been widely tested with the popularity of a simple "chip".
imbosile
11-01-2006, 09:53 AM
Chip it.
Spyder
11-01-2006, 09:55 AM
Chip it.
That wasn't the discussion point here Imbosile.
Chip it.
Jordan that was clever. Although I am the only one who will get it. It's true according to the guy on facebook all vw people do is.....CHIP IT!!!
:lmao:
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.