Djlin
10-10-2006, 11:00 PM
91blkteg, or steve is a nice and very talented guy! he helped me with my dent that i had and did great just on pulling it out this is the progress so far.. next step is filling sanding etc..
http://i19.photobucket.com/albums/b158/aznl2iceboi/baddent.jpg
started from this to...
http://i19.photobucket.com/albums/b158/aznl2iceboi/Photo-0174.jpg
he hooked me up with his rear bumper and slowly worked on it, i primered it to prevent any rusting until further work is done.
http://i19.photobucket.com/albums/b158/aznl2iceboi/Photo-0181.jpg
close up pic...
thanks again steve and will update more as it progresses :goodjob:
10/31/06
work progressed ! was delayed because of busy schedules and bad weather :2up:
heres what we started with...
http://i19.photobucket.com/albums/b158/aznl2iceboi/151382627717_3300.jpg
http://i19.photobucket.com/albums/b158/aznl2iceboi/151382724229_3300.jpg
then filling in the dent..
http://i19.photobucket.com/albums/b158/aznl2iceboi/151382846725_3300.jpg
http://i19.photobucket.com/albums/b158/aznl2iceboi/151382950533_3300.jpg
this stuff dried and it was SOLID!! strong stuff steve KNOWS what he's doing trust me this man knows his stuff..
http://i19.photobucket.com/albums/b158/aznl2iceboi/151383272709_3300.jpg
look at him chisel away~
http://i19.photobucket.com/albums/b158/aznl2iceboi/151383089669_3300.jpg
chiseling some more..
http://i19.photobucket.com/albums/b158/aznl2iceboi/151383383429_3300.jpg
quick sanding~ almost done for the night..
finished for the night it was gettin late..
http://i19.photobucket.com/albums/b158/aznl2iceboi/151378926341_3300.jpg
http://i19.photobucket.com/albums/b158/aznl2iceboi/151379069957_3300.jpg
already shaping up and almost done looks a WHOLE lot better..
last steps are sanding priming and making everything flush almost there :idb:
Thank you again steve your the man :goodjob:
http://i19.photobucket.com/albums/b158/aznl2iceboi/baddent.jpg
started from this to...
http://i19.photobucket.com/albums/b158/aznl2iceboi/Photo-0174.jpg
he hooked me up with his rear bumper and slowly worked on it, i primered it to prevent any rusting until further work is done.
http://i19.photobucket.com/albums/b158/aznl2iceboi/Photo-0181.jpg
close up pic...
thanks again steve and will update more as it progresses :goodjob:
10/31/06
work progressed ! was delayed because of busy schedules and bad weather :2up:
heres what we started with...
http://i19.photobucket.com/albums/b158/aznl2iceboi/151382627717_3300.jpg
http://i19.photobucket.com/albums/b158/aznl2iceboi/151382724229_3300.jpg
then filling in the dent..
http://i19.photobucket.com/albums/b158/aznl2iceboi/151382846725_3300.jpg
http://i19.photobucket.com/albums/b158/aznl2iceboi/151382950533_3300.jpg
this stuff dried and it was SOLID!! strong stuff steve KNOWS what he's doing trust me this man knows his stuff..
http://i19.photobucket.com/albums/b158/aznl2iceboi/151383272709_3300.jpg
look at him chisel away~
http://i19.photobucket.com/albums/b158/aznl2iceboi/151383089669_3300.jpg
chiseling some more..
http://i19.photobucket.com/albums/b158/aznl2iceboi/151383383429_3300.jpg
quick sanding~ almost done for the night..
finished for the night it was gettin late..
http://i19.photobucket.com/albums/b158/aznl2iceboi/151378926341_3300.jpg
http://i19.photobucket.com/albums/b158/aznl2iceboi/151379069957_3300.jpg
already shaping up and almost done looks a WHOLE lot better..
last steps are sanding priming and making everything flush almost there :idb:
Thank you again steve your the man :goodjob: