PDA

View Full Version : FS: Presicion gt2871R turbo/Manifold/Injectors


KBNISSAN
10-09-2006, 09:15 PM
This is a presicion gt2871R turbo with all water and oil lines for an sr20det bluebird turbo is direct bolt on to an sr20det manifold weather you have fwd or rwd. Asking $800 obo for the turbo hard line and actuator. The turbo also has an .86 A/R exhaust housing and it still has factory warranty only used for 600 miles. The manifold has been fully ported and ceramic coated I want $175 for the manifold. For more info Call me at 404-580-9162 (Kris) or pm me

http://i8.tinypic.com/25a2dxi.jpg
http://i8.tinypic.com/25a2ey1.jpg
http://i8.tinypic.com/25a2fl0.jpg
http://i8.tinypic.com/25a2h51.jpg


Venom 740 injectors, rail and fuel pressure regulator $300 obo
This are in great working condition.

http://i8.tinypic.com/25a2hdy.jpg

__________________
sleepin240
10-10-2006, 01:03 PM
bump for a bad ass setup!
slyde_wayz
10-10-2006, 03:54 PM
Whats the lowest you will take and what did it come off of??
KBNISSAN
10-10-2006, 09:11 PM
The lowest I will take for the turbo oil lines water lines and oil line restrictor is $750 the.It came off of my bluebird sr20det motor which is in my 95 200sx.
slyde_wayz
10-11-2006, 11:39 AM
OK Ill see what I can do.
The Green Monster
10-11-2006, 11:50 AM
you have the stock manifold and turbo for that motor so i can put it on my 200sx :goodjob:
HalfBaked
10-11-2006, 12:04 PM
What manifold is that?
brads94accord
10-11-2006, 12:14 PM
it has them same design as a stock manifold...maybe polished and spray painted...

maybe its a "pulsar" manifold.
PhAtBoYMr2
10-11-2006, 12:15 PM
so im guessing the exhaust side of the turbo is 3 bolts?
KBNISSAN
10-13-2006, 11:17 PM
It's a fully ported stock sr20det bluebird manifold and it's been ceramic coated to reduce heat to prevent cracking. The turbo has a five bolt exhaust housing.
KBNISSAN
10-14-2006, 09:13 AM
Injectors Sold!! Manifold and turbo still for sale!!!