PDA

View Full Version : WTB: B-series motor ASSEMBLED


EvasiveEF9
10-03-2006, 09:32 PM
Here's my predicament. I've got 91 Civic Hatch (EF) and an 88 CRx Si (EF) and almost all the parts to build an LSVTEC. Now that I've started school, I really don't have time or money to continue all three projects. I'm selling off the CRx rolling shell and/or the LSVTEC parts in order to at least get the motor for the Civic hatch.

What am I looking for?
+ B-Series. I prefer B18LS, but will consider any B-series. Engine MUST be fully assembled. I don't have time or money to go out and buy parts and assemble it (IE, gaskets, etc) in addition, I don't plan to get too dirty in an engine bay again until I can continue my project of a B18LSVTEC N/A 200whp. Please don't offer me an engine with high maintenance, and I prefer an untampered motor, but will consider others.
+ I would prefer to get a tranny (as well as any other EF-swap parts I can) with it, but this is definitly optional. Just a bonus.

Rejections:
+ I cannot afford to spend any more money on whatever I buy. So if it exceeds however much I can pull from the shell and engine, I can't take it...in other words, don't offer me a 2K$ engine.
+ I will not take ANY engine above 100K miles.

What do I have to offer?
***NOTE***
The CRx Shell and engine are not sold yet. I cannot make a purchase until they are sold. I approximate to have a reasonable amount from the sales.
+ I have to offer the shell and/or LSVTEC parts as trade.

With all of this in mind, please post up what you have available, and your asking amount. I'll answer any questions I can.

Please...don't screw me over. I'm in the Corps of Cadets up here at NGCSU in Dahlonega, and don't have much time or money to fool with an engine; maintenance, building, or repairing.

Thank you
DurtySpeed
10-03-2006, 09:50 PM
and don't have much time or money to fool with an engine; maintenance, building, or repairing.

Thank you


Lol, damn, you are involved in the wrong hobbies.
i4_garage
10-03-2006, 09:53 PM
i got a LS longblock....come take it away for 250$ ....coems wit evertyhing minus Dizzy
EvasiveEF9
10-03-2006, 09:58 PM
Nope. I'm in the right hobby...just have other priorities for the minute. I'll be back in the game building and running as soon as I get this school crap outta the way, LoL.
EvasiveEF9
10-03-2006, 09:59 PM
Vin, mileage?
JDMBeau
10-03-2006, 11:35 PM
i got a complete OBD0 LS swap. PM me for details, tranny motor, needs a clutch, easy to do when out of car, all mounts everything.
EvasiveEF9
10-04-2006, 12:07 AM
PM'd.
EvasiveEF9
10-04-2006, 10:10 AM
Bump for attention...still looking at offers.
EvasiveEF9
10-04-2006, 11:47 AM
Still entertaining
cceinc
10-04-2006, 12:33 PM
I am posting this for my buddy
these pictures were taken when i was building it.. the
head is still off the block.. it needs a headgasket
and timing belt.. other than that.. its straight..
block was hot tanked and painted. cylinders were
honed.. pistons were polished. rods were shotpeened
and balanced.. so was the crank.. new piston rings..
water pump.. oil pump. rear main seal. new main/rod
bearings.. thrust washers. its really clean as you can
see in the pics. the head was also cleaned.. i have
the cams/camgears.. camcaps and all of that. and i
have an intake manifold.

i also have an A1 cable tranny for b series.

oh yeah.. i have a SRP High Compression pistons on
Eagle Rods too.. 11:5:1 cr.. comes with Wiseco Rings
and ARP Rod Bolts

http://img242.imageshack.us/img242/7725/block3zi6.jpg

http://img242.imageshack.us/img242/476/block1ad9.jpg
BTEC
10-04-2006, 12:42 PM
ILL SELL U MY B16 FOR 3 GRAND
EvasiveEF9
10-04-2006, 01:00 PM
ILL SELL U MY B16 FOR 3 GRAND
So THAT'S how you get a high post count...
BTEC
10-04-2006, 01:02 PM
So THAT'S how you get a high post count...
U CAN DO IT LIKE THAT IF U WANT BUT IM SERIOUS. OF COURSE ITS NTO A STOCK B16. I DNT EXPECT U TO BE INTERESTED BUT I CAN POST IT. SUCKERRRRRRRR. LOL!!!
EvasiveEF9
10-04-2006, 01:08 PM
U CAN DO IT LIKE THAT IF U WANT BUT IM SERIOUS. OF COURSE ITS NTO A STOCK B16. I DNT EXPECT U TO BE INTERESTED BUT I CAN POST IT. SUCKERRRRRRRR. LOL!!!
Buy car for 5K and Ill take your engine for 3K.
Boostedsupra
10-07-2006, 07:01 AM
I have a LS swap out of a 1992 Integra. The car is wrecked but the swap is still in the car . So you could hear it run. It has a 5sp cable tranny . The swap has just over 90k miles. PM me if you are interested.
faketree
10-08-2006, 08:38 AM
E-mail sent
EvasiveEF9
10-08-2006, 12:42 PM
Hey, sorry for the delay in posting this, but I just picked up the engine/tranny friday.

However, I am still looking for DA Axles/Halfshaft, DA or EF-DX/SI hubs, and the EF b-series shift linkage. If anyones got 'em, let me know.
green91
10-09-2006, 06:07 PM
It must be your car i see in the campus dorm parking lot all the time, ive got a teal green turbo EF and a turbo black 240sx hatch, im in town a good bit
EvasiveEF9
10-09-2006, 06:50 PM
I think I've got the only modified EF up here. I know there was someone I met on myspace who was workin' on his, but I don't know what happened to him. It was a CRx.

But yeah, if it's primered, slammed, tinted, and shit-ass projector headlights on 17's...yeah that's me.

Catch me next time you see me ridin'.
green91
10-09-2006, 09:25 PM
Youre not, most of us just keep them parked. I know of several modded EFs locally. I tend to drive mine more than everyone else though.
EvasiveEF9
10-09-2006, 09:29 PM
Hardcore, you know there's an EF meet this saturday right? You goin'?
green91
10-09-2006, 09:30 PM
Yea but im not down to drive that far lol. Ill either be drunk or working on my 240sx.
EvasiveEF9
10-09-2006, 10:57 PM
Oooh, what I give to be drunk. I'm in the corps, so if I get caught with that shit, I'm dead.

If I don't have anyone to take shotgun, you feel like goin'?
green91
10-11-2006, 07:03 PM
Ill probably sit it out lol. Ive gotta get some shit done with my 240sx and then im going to completely redo my hatch, ill probably go next year or whenever lol.