ghb2oo1
10-03-2006, 09:38 PM
Contact: Donnie 252-725-5984
Email: [email protected]
Aim: GHB2oo1 <-- cut and paste, just trust me.
Location: Beaufort, nc 28516 www.mapquest.com (http://www.mapquest.com)
paypal verified and 100% positive feedback on ebay and carolinahondas.com, my home site.
Rocket motorsports dual race valve springs and titanium retainers.
The springs are generation 1 and the retainers are generation 2.
Rocket Motorsports Ti retainers have out performed Crower, skunk2 and others in extensive testing.
$315 from RM
Get them now, brand new in the box for $250 shipped!
I purchased parts to build my H22a hatch with but have got rid of the car before i had a chance to build it, due to me and my wife having a child. My loss is your gain.
http://i9.photobucket.com/albums/a66/ghb2oo1/forsale038.jpg
http://i9.photobucket.com/albums/a66/ghb2oo1/forsale037.jpg
Gen1 springs have 95 lbs. on the seat and 265 lbs. at 12mm of lift. These can handle up to 13+ mm of lift when used with the Gen1 retainers.
Gen2 springs have 55 lbs. on the seat and 180 lbs. at 12mm of lift. These springs can handle up to 14mm of lift when used with the Gen2 retainers.
Gen2 retainers are made of 6AL4V titanium. By using these retainers you can use a higher lift cam due to it's increased install height. By increasing the install height it also allows more retainer to valve seal clearance and prevents spring binding. They also have the same tight fitment that our Gen1 springs and retainers are known for.
Our Gen1 and Gen2 inner and outer springs can be mixed and matched to attain different spring pressures.
Gen1 valve springs - $165
Gen1 titanium retainers - $150
Gen2 valve springs - $165
Gen2 titanium retainers - $150
http://m24x.com/img/valvetrain.jpg
http://m24x.com/img/sleeves/sleeves1t.jpg (http://javascript<b></b>:;)
http://m24x.com/img/sleeves/sleeves2t.jpg (http://javascript<b></b>:;)http://m24x.com/img/sleeves/block1t.jpg (http://javascript<b></b>:;)
Click to enlarge
Custom sleeves made by Darton and installed by our machine shop.
These are the sleeves we run in our project 700 herbs. More info on the project here (http://m24x.zeroforum.com/zerothread?id=217).
Project 700 herbs has ran a best of [email protected] mph.
The fastest trap speed attained is 144 mph.
Block sleeving (bored, honed, decked) - $900 (+ $100 for line hone)
Email: [email protected]
Aim: GHB2oo1 <-- cut and paste, just trust me.
Location: Beaufort, nc 28516 www.mapquest.com (http://www.mapquest.com)
paypal verified and 100% positive feedback on ebay and carolinahondas.com, my home site.
Rocket motorsports dual race valve springs and titanium retainers.
The springs are generation 1 and the retainers are generation 2.
Rocket Motorsports Ti retainers have out performed Crower, skunk2 and others in extensive testing.
$315 from RM
Get them now, brand new in the box for $250 shipped!
I purchased parts to build my H22a hatch with but have got rid of the car before i had a chance to build it, due to me and my wife having a child. My loss is your gain.
http://i9.photobucket.com/albums/a66/ghb2oo1/forsale038.jpg
http://i9.photobucket.com/albums/a66/ghb2oo1/forsale037.jpg
Gen1 springs have 95 lbs. on the seat and 265 lbs. at 12mm of lift. These can handle up to 13+ mm of lift when used with the Gen1 retainers.
Gen2 springs have 55 lbs. on the seat and 180 lbs. at 12mm of lift. These springs can handle up to 14mm of lift when used with the Gen2 retainers.
Gen2 retainers are made of 6AL4V titanium. By using these retainers you can use a higher lift cam due to it's increased install height. By increasing the install height it also allows more retainer to valve seal clearance and prevents spring binding. They also have the same tight fitment that our Gen1 springs and retainers are known for.
Our Gen1 and Gen2 inner and outer springs can be mixed and matched to attain different spring pressures.
Gen1 valve springs - $165
Gen1 titanium retainers - $150
Gen2 valve springs - $165
Gen2 titanium retainers - $150
http://m24x.com/img/valvetrain.jpg
http://m24x.com/img/sleeves/sleeves1t.jpg (http://javascript<b></b>:;)
http://m24x.com/img/sleeves/sleeves2t.jpg (http://javascript<b></b>:;)http://m24x.com/img/sleeves/block1t.jpg (http://javascript<b></b>:;)
Click to enlarge
Custom sleeves made by Darton and installed by our machine shop.
These are the sleeves we run in our project 700 herbs. More info on the project here (http://m24x.zeroforum.com/zerothread?id=217).
Project 700 herbs has ran a best of [email protected] mph.
The fastest trap speed attained is 144 mph.
Block sleeving (bored, honed, decked) - $900 (+ $100 for line hone)