View Full Version : RACE Civic parting out...
RiceBoy
10-03-2006, 10:01 AM
Honda Civic Hatch DX parting out..I am loosing my storage space, plus my time are limited nowadays. Its a 92 Civic Hatch. Never been in an accident. However, it is completely stripped. Yes, meaning there are no heater core, no gas tank, no interior panels..Weights 2100 as it sits.
Everything is for sale and some are spoken for. Most of these only see A COUPLE of 1/4 miles passes. So yeah it's like BRAND SPANKING NEW...:D
1. Competition twin plate clutch (3 passes..Yeah almost new)..700
2. Kirkey aluminum pro seats (super lightweight) - Sold with the car
3. Tsunami Fuel pump - Sold with the car
4. Aem fuel rail - Sold
5. Greddy oil catch can with filter - Pending
6. DSS axles with hub (stage 5 before they change the all the system) good for 600hp or more....700 bucks
7. AIR CARBON FIBER intake (can't get them anymore, and everyone knows how these are. It doesn't retain heat at all). Sold
8. Racing Hard 15" Forged wheels with tires (tires might need changing but still driveable) No curbs...- Sold
9. Motec with wiring harness for honda - 1700 bucks..(almost brand new)
10. MSD Billet Dizzy with ignitor, wirings, coil..Here are the specs and the requirements http://www.msdignition.com/sci_20_8488.htm- 400 bucks. Your IGNITION Will not miss a beat even at 40psi of boost and 900 whp...
11. MSD 7al2 ignition system with Rev limiter..etc here is the link to the specs. http://www.msdignition.com/ignition_15_7220.htm ..160 bucks.
12. FULL RACE MANIFOLD T3 flange and ceramic coated...- 700 (it is flanged for a 40mm wastegate) I have a Tial in which you can get if you are buying the manifold for another 150
13. 4 gallon fuel cell (aluminum) that fits inside your spare tire. sold with the car
14. Drag 900 lbs rear spring - Sold
15. 1000cc injectors Precision... Sold
16. Jim Fab Traction bar - Sold
17. Blue Anodized 68mm Holley throttle body for $150
18. GM 3bar - 40 bucks (ALL SOLD)
19. Nitrous kit (wet from Nitrous Express). 300 bucks
20. Liquid filled fuel gauge - 25 bucks
21. GSR alternator - 50 bucks (one is sold, I still have ODB1 left).
22. GSR starter - 50 bucks
23. Fluidamper Pulley (this will save your oil pump)- 250 bucks
24. Midshaft- 50 bucks
25. Shift linkage for B-series Hydro - 80 bucks
There are a lot more..If you need it, I HAVE IT..If I dont' have it, YOU DON"T NEED IT..:D. Those are the only things that I can think of at this time.
Oh by the way....If you don't have money, don't waste my time. THese will stay here for a while since local sales will save me some time of boxing things up and shipping them.
Goinfasterthanu
10-03-2006, 10:20 AM
where are you located? i want the Fluidyne radiator with 2 fans...-200 bucks...DIBBS
iloveboost
10-03-2006, 10:27 AM
That twin disk looks tempting and for $800, that Air Carbon Fiber Intake manifold is a steal!!!
Awesome prices for amazing parts.
Good luck on the sale.
RiceBoy
10-03-2006, 10:44 AM
where are you located? i want the Fluidyne radiator with 2 fans...-200 bucks...DIBBS
I am in Suwannee..check your PM for my phone number.
GIMMIE THAT DAMN MANIFOLD!!
WHAT KINDA TIMES U GET OUT OF THE CAR?
RiceBoy
10-03-2006, 10:54 AM
GIMMIE THAT DAMN MANIFOLD!!
WHAT KINDA TIMES U GET OUT OF THE CAR?
Not too good, didn't really keep track. This is the first time I ran the car after 3 yrs.. Engine blew headgasket on 3rd run..Gotta take it apart to see how much damage..I knew I SHOULDN'T have ran the 112 gas but thats all they have. Oh well, shit happens. This helps me make up my mind ....I GOT TOO MANY TOYS.
Elbow
10-03-2006, 10:54 AM
Just one seat? Any pics of the fuel cell?
THAT SHIT SHOULDVE BEEN FAST. ID WOULD GUESS 11'S IF U KNOW HOW TO DRIVE AND HAD A GOOD TUNE ON IT.
SO YEAH, ARE U SELLING THE MANIFOLD OR IS IT ALREADY GONE?
silversol
10-03-2006, 11:02 AM
bump for some very nice parts!
RiceBoy
10-03-2006, 11:05 AM
Yeah just one seat...Sorry, trying to reduce weight.. Can't take the pic of the fuel cell bc I have an aluminum panel covering it..Track rules, u have to cover up the fuel cell if it is inside the cabin...
RiceBoy
10-03-2006, 11:07 AM
THAT SHIT SHOULDVE BEEN FAST. ID WOULD GUESS 11'S IF U KNOW HOW TO DRIVE AND HAD A GOOD TUNE ON IT.
SO YEAH, ARE U SELLING THE MANIFOLD OR IS IT ALREADY GONE?
hehehe...nah more like low 10 or high 9 if track is prep...It dynoed 730whp...I will let you know about the manifold in couple of days. Its full race and ceramic coated..With HO T67.
superman
10-03-2006, 11:09 AM
pmed
hehehe...nah more like low 10 or high 9 if track is prep...It dynoed 730whp...I will let you know about the manifold in couple of days. Its full race and ceramic coated..With HO T67.
:eek: WELL THEN. I HAD NO IDEA OF THE POWER, MTR OR NE THING BUT I GOT MY B16 TO GO 13.0 WITH A SHITTY TUNE, STREET TIRES, TRASHY AXLES, AND 260 WHP SO I WAS TRYING TO GET A DESCENT BALL PARK ON THE TIME.
YEAH LET ME KNOW ON THE MANIFOLD
Vteckidd
10-03-2006, 11:39 AM
these are crackhead deals.
sorry to see it go Trinh
BUMP
pmed ya bout the hood, does it come with the hood pins, and u wanna trade that valve cover??
soplocar
10-03-2006, 04:41 PM
how much for the t67 ho??? and what trim is it??
owweee
10-03-2006, 05:34 PM
how much for the Cf hood and the amber corner..lmk..pm me..thanx..=)
EX-Svic
10-03-2006, 05:40 PM
Fenders?? how much
RiceBoy
10-03-2006, 06:35 PM
how much for the t67 ho??? and what trim is it??
650...They are 980 bucks NEW, and this only have litterary 3 passes...The A/R housing is .82 on the turbine side.
B18BPowaaa
10-03-2006, 06:36 PM
Check pm please
RiceBoy
10-03-2006, 06:37 PM
As for the hood and front end..I am trying to keep the car as a shell..At this moment, I already have a buyer for the rolling shell. Sorry folks...
i will trade ya front ends plus cash if u r willing?lmk
HeLLo iM iZzY
10-03-2006, 07:29 PM
damn that shit looks bad ass !
RiceBoy
10-04-2006, 11:14 AM
Updated..Some items are sold...I still have a lot of stuff...SKUNK 2 cam gears...Type R Cam, etc....LOTS OF STUFF...gauges, jim fab traction bar, etc...
Updated..Some items are sold...I still have a lot of stuff...SKUNK 2 cam gears...Type R Cam, etc....LOTS OF STUFF...gauges, jim fab traction bar, etc...
sounds like u need to update ur list bc i dnt see any traction bars or there. put sold nest to the items u sold in red or take them off ur list so u dnt keep getting questions about them. for those helpful ideas i think u should give me that turbo mani asap. lol!!!
PawnShopCEO
10-04-2006, 11:48 AM
any pictures of the fuel cell?
cf hood sold to me! bump for GREAT guy and and GREAT parts!
anothaRRR
10-04-2006, 03:35 PM
Bump for some good shit...Everything is in top notch....
mnjh94
10-04-2006, 03:54 PM
damn Thrinh.. sorry to hear that happend to ya....
is that the 10 sec hatch couple yrs ago?
good luck for you man..
so what's your plan now?
later
RiceBoy
10-04-2006, 04:31 PM
sounds like u need to update ur list bc i dnt see any traction bars or there. put sold nest to the items u sold in red or take them off ur list so u dnt keep getting questions about them. for those helpful ideas i think u should give me that turbo mani asap. lol!!!
Yeah, did what you suggested...Thanks...CHeck out with the dude who wanted my manifold..He can't get it at this time. So let me know.
PawnShopCEO
10-04-2006, 04:56 PM
how about you respond to my post about pictures for the fuel cell
RiceBoy
10-04-2006, 06:06 PM
Yeah just one seat...Sorry, trying to reduce weight.. Can't take the pic of the fuel cell bc I have an aluminum panel covering it..Track rules, u have to cover up the fuel cell if it is inside the cabin...
That was my previous respond..However, the fuel cell stays with the car..The shell is tentatively sold. AS soon as I take the engine out which is this weekend.
SL33P3R
10-04-2006, 06:08 PM
Are you selling the throttle body?
How much?
-Taylor
RiceBoy
10-04-2006, 06:10 PM
Its a holley 68mm....$150..They are 300 new.
SL33P3R
10-04-2006, 08:04 PM
Will it bolt up to my Victor X? Im LS, LMK man Im interested
-Taylor
RiceBoy
10-04-2006, 08:17 PM
Yes, it will..
boostedb16
10-04-2006, 08:23 PM
still got the catch can and will you ship.
Goinfasterthanu
10-04-2006, 10:09 PM
pm me a price for traction bars... Shure you wont sell the cell?
Goinfasterthanu
10-04-2006, 10:13 PM
sorry just saw your price...you know if they will work with a h22?
PawnShopCEO
10-04-2006, 10:29 PM
only full race works with h22 as far as i know... boostfed (terry) has the best deals on em
RiceBoy
10-05-2006, 11:35 AM
sorry just saw your price...you know if they will work with a h22?
I am not sure....I know full race has different specifications for engine wise, but that is because the position of their traction bars are different. However, this is one of the few things that FULL RACE can't compare to JIM FAB..I had both...Jim FAb is well constructed.
anothaRRR
10-05-2006, 06:30 PM
uhm, MOTEC....
Z33_kid
10-05-2006, 06:48 PM
hey u selling the shell for how much ??cash in hand lmk
Sonny BonaHo
10-05-2006, 06:51 PM
how much for tha type r cams? lmk
RiceBoy
10-06-2006, 09:14 AM
how much for tha type r cams? lmk
sorry, they r sold
RiceBoy
10-06-2006, 09:14 AM
uhm, MOTEC....
Yep, sell your AEM..and go for the motec..Tow it to Tony1 and tune it to 1000whp fonzy...
It was him who I bought it from.
93H22ACX
10-06-2006, 10:03 AM
bump for some good parts and a good guy.
if i had a honda i'd get that motec :(
ORGANIZATIONXIII
10-06-2006, 10:22 AM
wish I had the money for the wheels
anothaRRR
10-06-2006, 11:09 AM
Yep, sell your AEM..and go for the motec..Tow it to Tony1 and tune it to 1000whp fonzy...
It was him who I bought it from.
Id have to sell both of my AEM's to get this...uhm, we'll see...Got coils?
RiceBoy
10-06-2006, 01:00 PM
I GOT LIKE a truckload of coils man.....4 blaster SS, 2 dual posts coils, 4 CBR coils to make sequential ignition...If somehow I can series wire all of them together..I guarantee I will never have problem with misfiring...:D
DB8-2NVY
10-06-2006, 08:24 PM
what cams you got, ctr or itr???
SL33P3R
10-07-2006, 04:32 AM
Are you selling the tranny?
How much if you are
-Taylor
boostedb16
10-07-2006, 07:06 AM
so you dont still have the catch can?
RiceBoy
10-07-2006, 10:37 AM
yes, I still have the catch can..I am in gwinnett. .
Also, the tranny is sold..sorry.
all-mota
10-08-2006, 10:45 AM
pm sent i need your number to come pick up the wheels importlounge is down and i can't get it from my pm's
RiceBoy
10-08-2006, 06:57 PM
Update with a lot of stuffs sold...and spoken for...Still have gauges, and tach, and etc...
SL33P3R
10-08-2006, 08:31 PM
Selling the FMIC? How much
-Taylor
RiceBoy
10-09-2006, 09:06 AM
Sorry, 80 % of the car are SOLD...only what is listed are available. So look for what is left on the list ONLY ..If I see something elses that are still availalbe. I will put it on the list in the near FUTURE.
EvasiveEF9
10-09-2006, 11:14 AM
Still got that shift linkage? Get back at me if it's EF b-series.
superman
10-09-2006, 12:52 PM
pmed
soplocar
10-09-2006, 04:57 PM
still have the halfshaft???? if so will pick up 2nite.
93H22ACX
10-10-2006, 07:18 AM
do u have a h22 for sale :D jk
bump
RiceBoy
10-10-2006, 09:49 AM
NO....I heard H22 have lots of torque so I didn't feel changing axles every other weekends..
SE-Rious1
10-10-2006, 11:03 AM
got stock wheels ?
Spyder
10-10-2006, 11:44 AM
which NOS kit is it exactly? I can't remember...
RiceBoy
10-10-2006, 11:59 AM
NX express...
djmaddmartin
10-11-2006, 01:06 AM
Valve cover still for sale? If so I'm interested. 770-312-2798
n1accord
10-11-2006, 01:35 AM
anything else left man?
RiceBoy
10-12-2006, 07:36 AM
Valve cover still for sale? If so I'm interested. 770-312-2798
Sorry, its sold...
RiceBoy
10-12-2006, 07:37 AM
anything else left man?
Some, mostly accessories..If you know what you are looking for, pm me or post here and I will try to see.
iloveboost
10-12-2006, 01:31 PM
Bump again for some nice parts.
Whoever got the AIR CF Intake Manifold got a deal!
EvasiveEF9
10-12-2006, 02:12 PM
Starter and Alt...obd1?
RiceBoy
10-13-2006, 09:34 AM
Starter and Alt...obd1?
I don't think there is a different..I know definitely with the starter..Because all it is is 2 wires..One is bolted on with a 12mm bolt. The other is the signal plug with is a one plug..As for the alternator, I am pretty sure the plugs are the same...
RiceBoy
10-15-2006, 03:10 PM
Updated with some stuff sold...
bump for tran (sp?) dude im lovin the audio console, GOOD SELLER!
thepolecat
10-15-2006, 08:40 PM
never answered (read) my pm.
RiceBoy
10-15-2006, 08:50 PM
never answered (read) my pm.
sorry bro.. You wanted a rear sway bar. This car never came with it, nor do I need it since it is a drag car...
EvasiveEF9
10-15-2006, 10:08 PM
I don't think there is a different..I know definitely with the starter..Because all it is is 2 wires..One is bolted on with a 12mm bolt. The other is the signal plug with is a one plug..As for the alternator, I am pretty sure the plugs are the same...
Alright, I'll check up on the starter, but I think you're right. I'm just on a budget trying to build mine, haha. As for the alternator, I THINK the OBD1 and 0 are the same, but I KNOW OBD2 is different. I know because I've got an OBD0 d-series alternator and OBD2 b-series alternator sitting at my house...but it'll be easy to tell. OBD2 has a squared plug where as OBD1 and 0 both have round plug-ins.
RiceBoy
10-17-2006, 09:39 AM
BUMP
RiceBoy
10-19-2006, 08:04 AM
Alright, I'll check up on the starter, but I think you're right. I'm just on a budget trying to build mine, haha. As for the alternator, I THINK the OBD1 and 0 are the same, but I KNOW OBD2 is different. I know because I've got an OBD0 d-series alternator and OBD2 b-series alternator sitting at my house...but it'll be easy to tell. OBD2 has a squared plug where as OBD1 and 0 both have round plug-ins.
Actually I was looking thru my stash..I might even have a ODB1 alternator.
EvasiveEF9
10-19-2006, 01:18 PM
Already got one this past week. :P
Got flywheel bolts? :)
jimjam187
10-21-2006, 07:36 AM
I never got a return pm from you. Id like the intercooler piping and let me know if you still have the car./
RiceBoy
10-21-2006, 08:48 AM
I never got a return pm from you. Id like the intercooler piping and let me know if you still have the car./
Sorry, they are sold. But its best to have them made custom made since each set up is different.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.