jdmlude
05-26-2005, 10:00 PM
-2001 oem prelude 4-wire heated primary oxygyen sensor
-32k on the 02 sensor
-50 dollars firm local buyer 60 shipped if other
I threw a CEL for slow response. I had the code cleared and the CEL never reappeared which indicates it was a intermediate failure. However, I still chose to replace it with. I just recently tested the 02 and is it is responding with no pauses. Russ can vouch that it was in working condition. You can test it yourself if you have a torch and volt-meter.
You can see that there are no deposits or any excessive carbon buildup...
http://img202.echo.cx/img202/4900/untitled25wg.jpg
http://img171.echo.cx/img171/9619/untitled15fg.jpg
tech article w/ pictures showing a bad 02 sensor...(scroll to the bottom)
http://www.ngkspark.com.au/tech_info_oxyge...nsors_index.htm (http://www.ngkspark.com.au/tech_info_oxygen_sensors_index.htm)
-32k on the 02 sensor
-50 dollars firm local buyer 60 shipped if other
I threw a CEL for slow response. I had the code cleared and the CEL never reappeared which indicates it was a intermediate failure. However, I still chose to replace it with. I just recently tested the 02 and is it is responding with no pauses. Russ can vouch that it was in working condition. You can test it yourself if you have a torch and volt-meter.
You can see that there are no deposits or any excessive carbon buildup...
http://img202.echo.cx/img202/4900/untitled25wg.jpg
http://img171.echo.cx/img171/9619/untitled15fg.jpg
tech article w/ pictures showing a bad 02 sensor...(scroll to the bottom)
http://www.ngkspark.com.au/tech_info_oxyge...nsors_index.htm (http://www.ngkspark.com.au/tech_info_oxygen_sensors_index.htm)