View Full Version : Power Mods GSR Swap Instructions?
eltiegro
09-23-2006, 09:02 PM
Is there any sources or websites where I could get a write up, or something for a gsr swap into a 94 civic 4dr. I know its a noob question, but i couldnt find anything on the swap or where to order mounts and stuff like that. Any help would be a help.
SLow_POke
09-23-2006, 10:50 PM
Is there any sources or websites where I could get a write up, or something for a gsr swap into a 94 civic 4dr. I know its a noob question, but i couldnt find anything on the swap or where to order mounts and stuff like that. Any help would be a help.
1. pick up phone.
2. dial your local PERFORMANCE SHOP:goodjob: .
3. on the serious note i been to local shops, and the only ones that treated you great BTLGROUND.com and MSPi
there ARE TONSSSSSS of places to get info and parts for the swap . BUT if you havent done it before save yourself the head ache. :2cents:
-Ernie
toonz
09-24-2006, 12:18 AM
GSR swap obd1 Hmotorsonline.com
Mounts Hasport.com
5spd da intermediate shaft, font and rear bracket from a 94 teg from honda parts connection or any local junkyard
wiring go to rywire.com
get da axles there a bit longer I think from your local NAPA
and for as directions it's pretty much easy and common sense if your a Auto Technician just take the old motor out follow the mount kit directions and WALAAA you just completed your swap buuuuutttttt if you have know idea give Mainstream Performance a call:goodjob:
eltiegro
09-24-2006, 12:50 PM
Thanks guys for the help on the links, but do any of you know of anyother sites that cary motors such as jhot imports and etc.
Sonny BonaHo
10-08-2006, 09:36 PM
GO TO HONDAHYBRID. DONT KNOW THE EXACT WEB ADRESS BUT ITS GOTTA LOTA ARCHIVED INFO I THINK ITS HONDAPERFORMANCE.ORG OR SOMETHIN
Sonny BonaHo
10-08-2006, 09:37 PM
Thanks guys for the help on the links, but do any of you know of anyother sites that cary motors such as jhot imports and etc. HMOTORSONLINE.COM:goodjob: FOR YOUR MOTOR
drmcivicsi
10-08-2006, 10:08 PM
PM mr 2jzkidd he works at MSPi/turbodave
JDMBeau
10-09-2006, 01:39 AM
not to be rude, but if you dont know how to do the swap, then i would reccomend going to a shop. pick up a helms if you must do it yourself, or a honda factory service manual
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.