PDA

View Full Version : 2002 Yamaha R6 ultimate stuntbike



DRFTR
09-13-2006, 08:03 PM
have a 2002 yamaha r6 streetfighter stuntbike...flakes out yellow paint job, the tank has also been dented on the top for highchair wheelies and molded smooth...the tank looks so good it looks stock, racing 905 12 oclock bar, power stuntworks crash cage, rear handbrake kit, 60 tooth vortex rear sprocket, full racing Hindle exhaust, black midpipe not shown, rejetted carbs, arcebis front projector headlight, 530 chain conversion, custom undertail and taillight kit, topend of motor just refreshed with titanium parts...topend refreshed 2 months to keep in good running order, motor pulls hard and will stand up in 5th gear, the transmission is slipping in 2nd...all total about $100 worth of work for the bike to like new again...this is one of the sickest stuntbikes around...has been in many shows and competitions and tearin up the street of the ATL for a while now...so let me know.

Asking 3000 obo financing available
dave
404-406-9061

rickgiblin
09-13-2006, 10:28 PM
dam, good looking stunter... i wanted to start stuntin but the wife said hell no... put it up on http://www.stuntlife.com/classifieds/ thers a bunch of stunters on there

DRFTR
09-15-2006, 05:55 PM
dam, good looking stunter... i wanted to start stuntin but the wife said hell no... put it up on http://www.stuntlife.com/classifieds/ thers a bunch of stunters on there


thanks rick...as far as stuntlife..those guys are a bunch of broke asses...stuntusa is so much better...

rickgiblin
09-23-2006, 12:29 AM
bump... just trying to get a great bike sold

DRFTR
10-01-2006, 04:07 PM
bumpity bump...

DRFTR
10-08-2006, 04:00 AM
bump...need this thing sold asap so i can finish my e46 m3 build... pm me offers...financing available

DRFTR
10-08-2006, 12:01 PM
new 530 rk chain just installed, 3000 obo...financing available

LQQKITZME
10-08-2006, 09:58 PM
new 530 rk chain just installed, 3000 obo...financing available

you finance?? how much down and how much a month??

DRFTR
10-09-2006, 10:48 AM
how much you got down and how much can you pay a month???

Nismo
10-09-2006, 03:25 PM
is this bike different from a regular r6? Is it a good starter bike too>

LQQKITZME
10-09-2006, 04:07 PM
I am just worried about second slipping..mainly

DRFTR
10-09-2006, 05:16 PM
is this bike different from a regular r6? Is it a good starter bike too>


the bike is a regular r6, just modded for stuntriding...as far as for a beginner...you would need a different sprocket...the sprocket that is on there is a monster and like i said will still wheelie in 5th gear...

DRFTR
10-09-2006, 05:17 PM
I am just worried about second slipping..mainly


its not that bad...you can cruise around in second, just don't hammer it...its not an expensive part to replace...just i don't have the time to do it

xechno
10-09-2006, 05:37 PM
When you say slipping... you are telling me the clutch going bad or what?
I am a fellow rider off of gsb and have been looking to get into stunting this might be the fastest way to get into it but I don't want something that needs alot of work to fix.

Can I pay the extra 100 and you fix the slipping problem?

DRFTR
10-10-2006, 01:15 AM
When you say slipping... you are telling me the clutch going bad or what?
I am a fellow rider off of gsb and have been looking to get into stunting this might be the fastest way to get into it but I don't want something that needs alot of work to fix.

Can I pay the extra 100 and you fix the slipping problem?


its not the clutch...its the actually gear for second that is just worn...i would fix it if i had the time man honestly...plus my time isn't cheap ;)

the bike is totally set up with all top of the line stunt parts, new 530 rk chain, rear vortex 60 tooth sprocket is maybe 3 months old, the racing 905 12 bar is 2 months old, rear handbrake kit is 2 months old as well...over all there is about $800-$1000 in the last 3 months on just those parts alone...the power stunt works cage, acrebis frontend, db bars and risers, stainles braided brake lines, stainless hindle full racing exhaust, dyno jet jet kit, k&n air filter, modified air box, and then the titanium head work...so your at another $2700+ there as well in just parts...so in parts alone you are over $3000, not including a 2002 r6 with a custom yellow flaked out paint job and custom dented and resmoothed gas tank...

-dave

JDM-95-Hatch
10-10-2006, 11:11 AM
would you take a 1000 down and 300 a month??

DRFTR
10-10-2006, 08:15 PM
1500 down...300 a month

Tarzanman
10-10-2006, 11:28 PM
Sounds like the infamous First-generation-R6 2nd gear slippage problem.

DRFTR
10-11-2006, 02:19 PM
Sounds like the infamous First-generation-R6 2nd gear slippage problem.


haha well it is a yamaha...

thats why i'm more of a kawi and suzuki guy

DRFTR
10-12-2006, 01:55 AM
bump

DarkPrince10
10-17-2006, 01:37 PM
BUMP

xechno
10-24-2006, 06:56 PM
clean or salvage title?