vtec question?

[DrunkScotsman]

i have a d16a6 and just picked up a d16z6 head , anyone plz inform me on ... if it is an easy swap , what i will need to do it , will there be any extra parts i need to buy , and if i put this on will it mean my car will be vtec? thanx:cheers:

[SLow_POke]

i have a d16a6 and just picked up a d16z6 head , anyone plz inform me on ... if it is an easy swap , what i will need to do it , will there be any extra parts i need to buy , and if i put this on will it mean my car will be vtec? thanx:cheers:

some one else just recently just asked this same question. got a helpful link to H-T.com . Im sure its simple IF* your mechanically incline and you will need to wire vtec, SOHC vtec ECU (p28 assuming you have an obd1) Head gasket maching block. I would leave it for a shop if you never rewired a car or changed TB or swap heads at that

if i find the link ill update this post



-Ernie

[SLow_POke]

It's called a mini me and here is a link on HT

mini me (http://honda-tech.com/zerothread?id=735196)

I'm doin the same thing but on a b7 block

Along with the head you'll need a new dizzy, ecu, 2 wires for VTEC, spark plugs, wires and timing belt

Read that thread and it should help a lot

Good Luck, lmk how it turns out :goodjob::goodjob: :goodjob:

[RandomGuy]

i'm sure theres more involved to it like plugging holes, etc theyre two totally diff heads... i'm not a honda person but yeah man research it somewhere or go to hondatech

[DrunkScotsman]

mornin bump

[DrunkScotsman]

slow poke .... you have been a great help and if i knew how to give ya points i'd hit you up with quite a few , thanx bro!:bowdown:

[LIKEG6]

:goodjob: :goodjob:

woo hoo....that one is for a d16y7 bauleycivic on HT has another one for the d15b7 mini me but their all basically the same beside the wiring probably

good luck

[DrunkScotsman]

ttt

[DrunkScotsman]

ttt