PDA

View Full Version : P1381..



jdm_rs2000
08-16-2006, 11:17 AM
Wassup all,

ok I have a 98 Civic ex with a JDM B16A (came off a 00 Si) swap on the 00 si harness. I running it with 97 Integra GSR ECU (w/ Spoon chip) and GSR tranny. Im trying to pass these wackass emissions put you can't pass with the CEL on..

The only code I'm getting is the "%&$^#&#$" P1381 (CYP Sensor Intermittent Interruption)
But yea the sensor and ECU are fine.

I've called around to manufacturers that knew something more than a part number and someone said I simply needed to swap the "chipped" ECU with a stock 98 MT ex ecu and the code will dissapear. I did that and no effect, I drove around a little bit and same ol P1381 comes up.

I made sure to replace my plugs and wires with new ones and made sure the gapping was right. Changed the oil and Manual transaxle lubricant (no metal flaking or contamination I could tell). Still have the damn code.

Anyone know what other steps I can take to get rid of this code? (We all need to pass emissions someday right :goodjob:..if only I lived in bartow)

Thanks

jdm_rs2000
08-16-2006, 01:46 PM
hmm im going to replace the ignition coil and see what happens..

§treet_§peed
08-16-2006, 03:44 PM
here ya go bro....go here and you can definately find an answer..... http://www.honda-tech.com/zerothread/642479 :goodjob:

jdm_rs2000
08-16-2006, 10:13 PM
damn couldnt find an answer regarding my code bro..
A lot of great info tho.
The only thing there was the troubleshooting CYP sensor diagram, but my CYP sensor is fine..

I think the problem lies somewhere in the distributor... Already replaced the distributor cap, rotor and ignition coil and still have the damn code..

But thanks for the info :cheers:

§treet_§peed
08-17-2006, 12:06 PM
also did you try looking up what the the web site i gave you they show you how interpet what the code is without having to have that little computer to hook up to your car...

jdm_rs2000
08-17-2006, 12:12 PM
yep thanks..

but no worries cuase I have one of those little OBD2 readers.
Damn met up with a friend at a dealer and he said the code will remain as long as I run the B16A with the GSR ecu and distributor..said I need to swap the ecu and distributor for the one specifically from the 2000 civic si.

..fuck:no:

§treet_§peed
08-17-2006, 12:15 PM
look on ebay you can usual find a good one for a good prive..fo real no joke. just llok around and also post up you wannt to buy one in the WTB section....:goodjob:

jdm_rs2000
08-19-2006, 12:43 AM
yea thats what ill have to do..

yo thanks for the help man

§treet_§peed
08-19-2006, 07:25 AM
no problem...:goodjob: