HiPSI
05-19-2005, 12:56 AM
so i finally bit the bullet and ordered the new turbo so i will soon have for sale
(1) redtop T25 turbo w/your choice of either the HKS actuator i have on there now or a stock actuator. price is $200 w/HKS or $150 w/stock. will include inlet/outlet elbows as well as my self fabbed intake pipe that fits the Z32 MAF for $25. will be off the car by next week. checked for shaft play a couple days ago when i had the inlet elbow off and it's still tight.
(1) custom built T25 turbo with T3 super60 wheels. bearings went on me due to oil problem so it'll need a rebuild and a new compressor wheel. uses custom machined T25 housings to accept the super60 wheels but also bolt up to all factory parts. rebuild would be approx. $250-$300 (as quoted by majestic turbo, the ones that built it for me) and this turbo will flow enough to make a little over 300rwhp. it's similar in size to the FP big28 turbo. $75 takes it away. do the math on this one, for under $500 you have a 300+whp capable turbo.
if you just want the actuator, then $50 for the HKS actuator for the stock T25 (may also fit T28's).
also FS:
(1) Greddy metal layer headgasket for SR20DET, stock bore, 1.2mm thickness. used one time but the motor it was on got built/bored so the stock bore on this one wouldn't work anymore. MLS headgaskets like this one are reusable generally 4 times before they need replacement. $30
3" in/out high flow universal catalytic converter... keep the EPA happy but keep that turbo spooling easily. brand new, never installed $30
14" electric fan, kept my car plenty cool and got rid of that bigass space robbing mechanical fan. wire it on a manual switch or get a $20 thermal switch to control it. $40
S13 coupe rear black/grey interior... basically everything behind the front seats and below the rear window. this includes the rear deck, rear seat, seatbelt assemblies, lower rear sidepanels, plastic surrounds for the trunk, etc. $50 takes the whole shebang.
and still have these gorgeous, wonderful, spectacular, splendiforous Falken Hanabi wheels for sale. 17x7.5 +32 offset with hankook sport K104 tires, 205/45-17. ~1500 miles on them of normal daily street driving. dual pattern 4 lug so they will fit your S13 and your honda if you like swapping stuff back and forth :wink: . be different, way nicer than your usual riceboy konigs at a konig kind of price. $600 takes them. want pics? just ask and i'll post.
(1) redtop T25 turbo w/your choice of either the HKS actuator i have on there now or a stock actuator. price is $200 w/HKS or $150 w/stock. will include inlet/outlet elbows as well as my self fabbed intake pipe that fits the Z32 MAF for $25. will be off the car by next week. checked for shaft play a couple days ago when i had the inlet elbow off and it's still tight.
(1) custom built T25 turbo with T3 super60 wheels. bearings went on me due to oil problem so it'll need a rebuild and a new compressor wheel. uses custom machined T25 housings to accept the super60 wheels but also bolt up to all factory parts. rebuild would be approx. $250-$300 (as quoted by majestic turbo, the ones that built it for me) and this turbo will flow enough to make a little over 300rwhp. it's similar in size to the FP big28 turbo. $75 takes it away. do the math on this one, for under $500 you have a 300+whp capable turbo.
if you just want the actuator, then $50 for the HKS actuator for the stock T25 (may also fit T28's).
also FS:
(1) Greddy metal layer headgasket for SR20DET, stock bore, 1.2mm thickness. used one time but the motor it was on got built/bored so the stock bore on this one wouldn't work anymore. MLS headgaskets like this one are reusable generally 4 times before they need replacement. $30
3" in/out high flow universal catalytic converter... keep the EPA happy but keep that turbo spooling easily. brand new, never installed $30
14" electric fan, kept my car plenty cool and got rid of that bigass space robbing mechanical fan. wire it on a manual switch or get a $20 thermal switch to control it. $40
S13 coupe rear black/grey interior... basically everything behind the front seats and below the rear window. this includes the rear deck, rear seat, seatbelt assemblies, lower rear sidepanels, plastic surrounds for the trunk, etc. $50 takes the whole shebang.
and still have these gorgeous, wonderful, spectacular, splendiforous Falken Hanabi wheels for sale. 17x7.5 +32 offset with hankook sport K104 tires, 205/45-17. ~1500 miles on them of normal daily street driving. dual pattern 4 lug so they will fit your S13 and your honda if you like swapping stuff back and forth :wink: . be different, way nicer than your usual riceboy konigs at a konig kind of price. $600 takes them. want pics? just ask and i'll post.