A question......

[§treet_§peed]

What's up?? I was thinking about try to attempt building a 240 after i get through with my Honda Project lol :D...anways, i was just wondering on what some of your opinions would be on what setup on a 240 i should go with.. i love the back end on s13's but i love the front end on a s15 lol..and yes i know there is a conversion kit to take care of that..but i was just wondering what ya'll think is a good setup with the motor, suspension, weight reduciton, tires, wheels, etc.would all be to go with..lol thanks for the input guys :goodjob:

[sebastianHoff]

a ceiling fan. your question has been answered, good day.

[§treet_§peed]

:umno: and dude GTFO if you can't be nice..thanks... remember if you can't say something nice, then lick my nuts...thank you and i bid you good day...

[Acet]

Well Street Speed, You can go with a lot of different set ups. You can go with the following motors:

CA18DET
SR20DET
KA24DET
RB20DET
RB25DET
RB26DET/RB26DETT
2J

and so on. It all depends on how much power you're trying to reach. As far as the suspension goes, go with Coilovers because springs straight up SUCK ASS. Get some 17" 5Zigen wheels, a roll cage, and a s15 front end and you'll be all set.

www.GA240SX.com is a GA site for 240sx....you're welcome to join

[HalfBaked]

Yes because fn01rc's aren't played out...

If you want a badass s13, just put a simple sr in it, clean ass kit on it, some works with a sick offset and slam it to the ground.

That simple.

Don't get 5Zigen, those are poor people.

[xXnimbusXx]

Yes because fn01rc's aren't played out...

If you want a badass s13, just put a simple sr in it, clean ass kit on it, some works with a sick offset and slam it to the ground.

That simple.

Don't get 5Zigen, those are poor people.

I happen to like 5zigen. SO what if they are cheap?... some of us cant afford some of the things you can.

[1439/2000]

I happen to like 5zigen. SO what if they are cheap?... some of us cant afford some of the things you can.

That nigga cant afford no works!!!


Keep your Honda and when you grow up, then get another car.

[HalfBaked]

I happen to like 5zigen. SO what if they are cheap?... some of us cant afford some of the things you can.

You have bad taste then.

Get a job.

[ahmonrah]

them works are the shizzle. i just spent some time at the jarco website. prices look good and they are fairly close. so when i get back from my trip i'm going down there to look at the facility in person. see what i can get for my 240 fastback.

[§treet_§peed]

lol thanks for the input. i will check that site out asap for real! thanks again guys!:goodjob:

[xXnimbusXx]

That nigga cant afford no works!!!


Keep your Honda and when you grow up, then get another car.


I know I can't afford no Works wheels. I'm a college student.
And no I dont own a honda. In love with my 240 thank you very much :taun:

[xXnimbusXx]

You have bad taste then.

Get a job.

Got a job thank you, and maybe you're right about my taste in the fn1orc. So what if I like them. Cheap and affordable and works great for me. Even tho I dont own any nice wheels. If I had the money I would go with volks. Shit forget the wheels, Im saving up for a motor swap.

[rupertaker]

I know I can't afford no Works wheels. I'm a college student.


You're a liar, you've never gone to a day of school in your life.

You're destined to drive a 240 the rest of your life.

[yudalicious]

1. maintenance on stock KA
2. tires/wheels, FN, work, blah, go with what works and with what fits your budget
3. brake pads and fluid, screw big brakes, I'll never understand why people upgrade to big brakes when they don't even fade their stock brakes
4. coilovers
5. track day ftw.

This way you'll be unique and part of the 5% of 240 drivers that actually drive their car and not just go to meets in parking lots and talk about how much power their AB20CDET makes and how JDM their coilovers are.

[§treet_§peed]

:lmao: good stuff yo :D