Nitrous Junkies, I need Help

[AnthonyF]

Alright, I have a N.O.S. Sniper Kit some1 gave me. It is for a carb though. It is a full brand new kit so I am not missing any pieces. My ? is, what do I need to make it into an EFI system? I don't know much about nitrous and fittings.

I have 2 solenoids already (fuel/nos) and it is a Wet kit. I believe I need a fogger, or something. I want to run a SMALL amount of nitrous. I know, whats the point then? B/c I am already S/C and I don't want to blow my shit up for the 3rd time. lol.

Can Anyone hook me up with a list of shit and possibly part numbers?

Can anyone help me out with install? Info only. Like where would I mount the solenoids, fogger nozzles, etc.., shiot like that. I have the turbo style S/C and my main problem is hooking up the fuel solenoid. Where do I get the fuel from? Do I need to tap into the fuel line, go before the rail, after the rails?


Thanks!

[B18c1Turboed]

All u need is the nozzle and the jets!
U might need the lines to run from solenoids to nozzle also!!

The Nozzle is like 35.00 at barnett and the lines about 10-15 each.
http://store.summitracing.com/partdetail.asp?autofilter=1&part=NOS%2D13700NOS&N=115&autoview=sku
jets are like 8.00 each!!!
http://store.summitracing.com/partdetail.asp?autofilter=1&part=NOS%2D13721NOS&N=115&autoview=sku


Happy spraying!!!

[B18c1Turboed]

Can anyone help me out with install? Info only. Like where would I mount the solenoids, fogger nozzles, etc.., shiot like that. I have the turbo style S/C and my main problem is hooking up the fuel solenoid. Where do I get the fuel from? Do I need to tap into the fuel line, go before the rail, after the rails?
Thanks!

We hook ares up to the fuel rail, we tap the fuel rail with a 1/8 fitting and convert to 4an! It doesnt really matter if you tap the fuel line eighter we have done that a few times.
If its a civic theres the line that come off the fuel filter to fuel rail you can cut that and put a T fitting in there.

[AnthonyF]

I appreciate it man!

No. It is for my V6 S/C Mustang. :) I'm going to be running a little lower compression with stronger pistons. So I figured a little spray wouldn't hurt it. :)

Thanks again!

[AnthonyF]

also, I see there are a lot of different sizes of jets but it doesn't show you the HP rating on them. Would u happen to know the size with each HP? Thanks bro.

[B18c1Turboed]

Here you go hope this helps.

http://www.robietherobot.com/NitrousJetCalculator.htm