PDA

View Full Version : PLEASE HELP!! :) VERY URGENT



Acet
07-18-2006, 03:16 PM
Hey you guys, my friend is having a problem. His factory alarm system on his jeep cherokee is messed up. The car starts but dies right away because of the fuel cut off option on the factory alarm. Is there a way to disconnect the alarm? and if so, where?

B16a2 Civic
07-18-2006, 03:19 PM
cut the power wire.

devin
07-18-2006, 03:19 PM
rip it out

The Golden Child
07-18-2006, 03:20 PM
u have to take the flux capacitor out ..

CSquared
07-18-2006, 03:23 PM
put it in gear and push it into an intersection.

Is it manual or automatic? Are you sure it's fuel cut and not starter cut? And are you sure that the starter and or battery/alternator just didn't go?

Acet
07-18-2006, 03:24 PM
I dont know where it is located. Should it be by the driver kick panel? under the metal bar?

Acet
07-18-2006, 03:25 PM
put it in gear and push it into an intersection.

Is it manual or automatic? Are you sure it's fuel cut and not starter cut? And are you sure that the starter and or battery/alternator just didn't go?

POSITIVE his windows also dont work. LETS just say NOTHING WORKS because the alarm cut everything out.

Its auto :)

The Golden Child
07-18-2006, 03:26 PM
pop the hood look for a black wire and cut it ..
then turn the engine on and see what it does ..

CSquared
07-18-2006, 03:27 PM
POSITIVE his windows also dont work. LETS just say NOTHING WORKS because the alarm cut everything out.

Its auto :)

you do realize that would also happen if he killed the battery?

Acet
07-18-2006, 03:31 PM
the battery works dude... you can turn the ignition on and the lights on the dash come on.....plus we're not 2. We would realize if it was the battery. I dont think that the power wire would run to the battery because its a stock alarm.

Acet
07-18-2006, 03:36 PM
shit....damn i want to get that thing to run....such a pussssy magnet :)

Acet
07-18-2006, 03:40 PM
i was trying to follow the wire from the speaker but i dont know if thats the one..

The Golden Child
07-18-2006, 03:41 PM
yea its that one ..
cut it ..

B16a2 Civic
07-18-2006, 03:44 PM
disconnect the battery?

Acet
07-18-2006, 03:46 PM
lol its that one? Thats the wire that makes the speaker go off...i am trying to disconnect it period.

The battery was connected when we tried fixing it, but now its disconnected since its a $150 battery

Acet
07-18-2006, 03:46 PM
"it" being the whole alarm module in general, not the speaker

CSquared
07-18-2006, 03:51 PM
jump up on a dedicated forum dude... i'm sure it's a common occurance in the community. You're going to have a hell of a time trying to find someone who knows what they are talking about here.(as far as that particular car)

Acet
07-18-2006, 03:54 PM
aight, i'll do that

Acet
07-18-2006, 04:10 PM
i posted on a website for car alarms but some on people help me if you can..

CSquared
07-18-2006, 04:15 PM
i dont think you're going to get what you're looking for on a forum like that... considering it's a factory alarm i would go to a board dedicated to jeeps... like one of these three.

http://www.jeepboard.com/cgi-bin/UBB/ultimatebb.cgi

http://www.jeepforum.com/forum/index.php

http://jeephorizons.com/phpbb/viewforum.php?f=33

4doortypels
07-19-2006, 03:44 AM
u have to take the flux capacitor out ..

definately... and if that doesnt work check the hyper drive and call R2 to come fix it:lmfao:

Acet
07-19-2006, 10:53 AM
lol wtf. My friend's jeep is not the "back into the future" peice of shit :)

Acet
07-19-2006, 11:16 AM
bump, someone help me....where is the security module on a 94 jeep cherokee?

SOHC MONSTER
07-19-2006, 11:34 AM
ok.... lemme grab the shop manual on it and ill be back in a sec

cherokee or grand cherokee?

SOHC MONSTER
07-19-2006, 11:41 AM
Ok, it says the RKE ( remote keyless entry) module is located between the sunvisors. There is a factory disarm wire located in the drivers kick panel (purple/yellow). Send this wire a ground pulse to this wire to disarm. If no luck, disconnect power from the Keyless module between the visors. I will do some more research and see if disconnecting power to the keyless module will disable anything else.

Acet
07-19-2006, 12:59 PM
thanks

SOHC MONSTER
07-19-2006, 01:01 PM
thanks


Not a problem. :goodjob:

SOHC MONSTER
07-19-2006, 01:25 PM
Ok, pin # 1 (Pink) is the constant 12 volt source for the keyless/security unit.
Pin # 11 is the ignition feed (Black). Try disconnecting the ignition feed first. It is a 12 pin connector located at the keyless module between the sun visors.

4doortypels
07-19-2006, 02:35 PM
lol wtf. My friend's jeep is not the "back into the future" peice of shit :)

thats star wars...lol good luck

Acet
07-19-2006, 05:16 PM
umm its back into the future as well

http://images.google.com/imgres?imgurl=http://www.cedmagic.com/featured/back-to-the-future/flux-capacitor-real.jpg&imgrefurl=http://www.cedmagic.com/featured/back-to-the-future/back-future.html&h=300&w=400&sz=36&hl=en&start=2&tbnid=DzbmDI3kboMJXM:&tbnh=93&tbnw=124&prev=/images%3Fq%3Dflux%2Bcapacitor%26svnum%3D10%26hl%3D en%26lr%3D%26sa%3DN