GET8UP
07-17-2006, 07:03 PM
Sold Sold Sold
I'm selling my complete surround sound because I moved into an apartment and I don't really use it very much anymore.
It includes:
Onkyo TX-SR503 Receiver
Specs:
Power Output* (8 ohm, 20 Hz-20 kHz, FTC)
Front L/R 75 W/Ch
Center 75 W
Surround L/R 75 W/Ch
Surround Back 75 W
Power Output* (6 ohm, 1 kHz, FTC)
Front L/R
Center
Surround L/R
Surround Back
Dynamic Power** (front)
3 ohm 180 W
4 ohm 140 W
8 ohm 95 W
THD (Rated Power) 0.08 % (all channels)
Damping Factor (1 kHz, 8 ohm) 60
Input Sensitivity and Impedance
PHONO MM
CD and TAPE Play 200 mV, 50 k ohm
Output Level and Impedance
TAPE REC 200 mV, 470 ohm
PRE OUT 1.0 V, 470 ohm
Frequency Response 10 Hz-100 kHz (+ 1 dB, - 3 dB)
S/N Ratio
PHONO (MM)
CD/TAPE 100 dB (IHF-A, 0.5 V input)
Phono Overload (1 kHz)
Tone Controls
BASS +/- 10 dB at 50 Hz
TREBLE +/- 10 dB at 20 kHz
Tuner Section
Usable Sensitivity
FM Mono 11.2 dBf, 1.0 uV (75 ohm IHF)
FM Stereo 17.2 dBf, 2.0 uV (75 ohm IHF)
AM 30 uV
S/N Ratio
FM Mono 76 dB (IHF-A)
FM Stereo 70 dB (IHF-A)
AM 40 dB
THD
FM Mono 0.2 %
FM Stereo 0.3 %
AM 0.7 %
FM Stereo Separation 45 dB at 1 kHz,30 dB at 100 Hz-10 kHz
General
Dimensions (W x H x D) 17 1/8" x 5 7/8" x 14 3/4"
Weight 20.7 lbs
Polk Audio M20 Floorstanding speakers
Specs:
Power
Power handling 150 Watts
Amplifier power (in watts) 20 - 150 Watts/channel
Frequency response 45Hz - 24kHz
Sensitivity 89 dB
Nominal impedance (in ohms) 8
Design
Speaker type Floorstanding
Design 2-way floorstanding loudspeaker
Bass driver(s) 6 1/2" Dynamic balance polymer composite cone driver
Midrange driver(s) N/A
Tweeter driver(s) 3/4" Dome Tweeter
Subwoofer type N/A
Subwoofer driver(s) N/A
General features
Dimensions main (height x width x depth, inches) 33 x 7.6 x 9.25
Dimensions Center (height x width x depth, inches) 2.5 x 6 x 4.3
Dimensions Rear (height x width x depth, inches) N/A
Dimensions subwoofer(height x width x depth, inches) N/A
Shielded for video use Yes
Priced as Each
Warranty Parts 60 Months
Warranty Labor 60 Months
Dimensions
Height 33.0 inches
Width 7.6 inches
Depth 9.3 inches
Weight 27.8 lbs.
Polk Audio CSM Center Channel Speaker
Specs:
Power
Power handling 100 Watts
Amplifier power (in watts) 10 - 100 Watts
Frequency response 55Hz - 22kHz
Sensitivity 90 dB
Nominal impedance (in ohms) 4 to 8
Design
Speaker type Center channel
Design 2-way center channel loudspeaker
Bass driver(s) 5 1/4" Dynamic Balance Polymer composite cone, shielded
Midrange driver(s) Unavailable
Tweeter driver(s) 3/4" (center only)
Subwoofer type N/A
Subwoofer driver(s) Information unavailable
General features
Dimensions main (height x width x depth, inches) 6.5 x 19 x 8.4
Dimensions Center (height x width x depth, inches) N/A
Dimensions Rear (height x width x depth, inches) N/A
Dimensions subwoofer(height x width x depth, inches) N/A
Shielded for video use Yes
Priced as Each
Warranty Parts 60 Months
Warranty Labor 60 Months
Dimensions
Height 6.5 inches
Width 19.0 inches
Depth 8.4 inches
Weight 18.5 lbs.
Polk Audio M10 Surround Speakers
Specs:
Power
Power handling 100 Watts
Amplifier power (in watts) 20 - 100 watts/channel
Frequency response 60Hz - 24kHz
Sensitivity 89 dB
Nominal impedance (in ohms) 8
Design
Speaker type Bookshelf/Surround
Design 2-way surround speaker
Bass driver(s) 5 1/4" Dynamic Balance Polymer composite cone, shielded
Midrange driver(s) N/A
Tweeter driver(s) 3/4" Dome Tweeter
Subwoofer type N/A
Subwoofer driver(s) Information unavailable
General features
Dimensions main (height x width x depth, inches) 10.6 x 6.5 x 7.4
Dimensions Center (height x width x depth, inches) N/A
Dimensions Rear (height x width x depth, inches) N/A
Dimensions subwoofer(height x width x depth, inches) N/A
Shielded for video use Yes
Priced as Pair
Warranty Parts 60 Months
Warranty Labor 60 Months
Dimensions
Height 10.6 inches
Width 6.5 inches
Depth 7.4 inches
Weight 16.6 lbs.
OmniMount Speaker Stands (HTS2)
Specs:
Bookshelf speaker stands: Three interchangeable adapters and an adjustable width platform will accept a variety of speaker sizes.
Cable management: In-post system keeps wires neat and out of sight.
Adjustable height: Raise from 31” to 45” for the ideal listening level.
Durable construction: It's made of powder coated steel for the perfect combination of strength and durability.
- I Will also include the speaker wire and remote control.
- All items are in excellent condition
- I paid about $1200 for all of it about 8 or 9 months ago.
Asking $600 OBO
I'm selling my complete surround sound because I moved into an apartment and I don't really use it very much anymore.
It includes:
Onkyo TX-SR503 Receiver
Specs:
Power Output* (8 ohm, 20 Hz-20 kHz, FTC)
Front L/R 75 W/Ch
Center 75 W
Surround L/R 75 W/Ch
Surround Back 75 W
Power Output* (6 ohm, 1 kHz, FTC)
Front L/R
Center
Surround L/R
Surround Back
Dynamic Power** (front)
3 ohm 180 W
4 ohm 140 W
8 ohm 95 W
THD (Rated Power) 0.08 % (all channels)
Damping Factor (1 kHz, 8 ohm) 60
Input Sensitivity and Impedance
PHONO MM
CD and TAPE Play 200 mV, 50 k ohm
Output Level and Impedance
TAPE REC 200 mV, 470 ohm
PRE OUT 1.0 V, 470 ohm
Frequency Response 10 Hz-100 kHz (+ 1 dB, - 3 dB)
S/N Ratio
PHONO (MM)
CD/TAPE 100 dB (IHF-A, 0.5 V input)
Phono Overload (1 kHz)
Tone Controls
BASS +/- 10 dB at 50 Hz
TREBLE +/- 10 dB at 20 kHz
Tuner Section
Usable Sensitivity
FM Mono 11.2 dBf, 1.0 uV (75 ohm IHF)
FM Stereo 17.2 dBf, 2.0 uV (75 ohm IHF)
AM 30 uV
S/N Ratio
FM Mono 76 dB (IHF-A)
FM Stereo 70 dB (IHF-A)
AM 40 dB
THD
FM Mono 0.2 %
FM Stereo 0.3 %
AM 0.7 %
FM Stereo Separation 45 dB at 1 kHz,30 dB at 100 Hz-10 kHz
General
Dimensions (W x H x D) 17 1/8" x 5 7/8" x 14 3/4"
Weight 20.7 lbs
Polk Audio M20 Floorstanding speakers
Specs:
Power
Power handling 150 Watts
Amplifier power (in watts) 20 - 150 Watts/channel
Frequency response 45Hz - 24kHz
Sensitivity 89 dB
Nominal impedance (in ohms) 8
Design
Speaker type Floorstanding
Design 2-way floorstanding loudspeaker
Bass driver(s) 6 1/2" Dynamic balance polymer composite cone driver
Midrange driver(s) N/A
Tweeter driver(s) 3/4" Dome Tweeter
Subwoofer type N/A
Subwoofer driver(s) N/A
General features
Dimensions main (height x width x depth, inches) 33 x 7.6 x 9.25
Dimensions Center (height x width x depth, inches) 2.5 x 6 x 4.3
Dimensions Rear (height x width x depth, inches) N/A
Dimensions subwoofer(height x width x depth, inches) N/A
Shielded for video use Yes
Priced as Each
Warranty Parts 60 Months
Warranty Labor 60 Months
Dimensions
Height 33.0 inches
Width 7.6 inches
Depth 9.3 inches
Weight 27.8 lbs.
Polk Audio CSM Center Channel Speaker
Specs:
Power
Power handling 100 Watts
Amplifier power (in watts) 10 - 100 Watts
Frequency response 55Hz - 22kHz
Sensitivity 90 dB
Nominal impedance (in ohms) 4 to 8
Design
Speaker type Center channel
Design 2-way center channel loudspeaker
Bass driver(s) 5 1/4" Dynamic Balance Polymer composite cone, shielded
Midrange driver(s) Unavailable
Tweeter driver(s) 3/4" (center only)
Subwoofer type N/A
Subwoofer driver(s) Information unavailable
General features
Dimensions main (height x width x depth, inches) 6.5 x 19 x 8.4
Dimensions Center (height x width x depth, inches) N/A
Dimensions Rear (height x width x depth, inches) N/A
Dimensions subwoofer(height x width x depth, inches) N/A
Shielded for video use Yes
Priced as Each
Warranty Parts 60 Months
Warranty Labor 60 Months
Dimensions
Height 6.5 inches
Width 19.0 inches
Depth 8.4 inches
Weight 18.5 lbs.
Polk Audio M10 Surround Speakers
Specs:
Power
Power handling 100 Watts
Amplifier power (in watts) 20 - 100 watts/channel
Frequency response 60Hz - 24kHz
Sensitivity 89 dB
Nominal impedance (in ohms) 8
Design
Speaker type Bookshelf/Surround
Design 2-way surround speaker
Bass driver(s) 5 1/4" Dynamic Balance Polymer composite cone, shielded
Midrange driver(s) N/A
Tweeter driver(s) 3/4" Dome Tweeter
Subwoofer type N/A
Subwoofer driver(s) Information unavailable
General features
Dimensions main (height x width x depth, inches) 10.6 x 6.5 x 7.4
Dimensions Center (height x width x depth, inches) N/A
Dimensions Rear (height x width x depth, inches) N/A
Dimensions subwoofer(height x width x depth, inches) N/A
Shielded for video use Yes
Priced as Pair
Warranty Parts 60 Months
Warranty Labor 60 Months
Dimensions
Height 10.6 inches
Width 6.5 inches
Depth 7.4 inches
Weight 16.6 lbs.
OmniMount Speaker Stands (HTS2)
Specs:
Bookshelf speaker stands: Three interchangeable adapters and an adjustable width platform will accept a variety of speaker sizes.
Cable management: In-post system keeps wires neat and out of sight.
Adjustable height: Raise from 31” to 45” for the ideal listening level.
Durable construction: It's made of powder coated steel for the perfect combination of strength and durability.
- I Will also include the speaker wire and remote control.
- All items are in excellent condition
- I paid about $1200 for all of it about 8 or 9 months ago.
Asking $600 OBO