Mr. Vteckidd Ver. 3.0............

[Vteckidd]

85mm Pistons,Tial Wastegate, 1000cc Injectors, Rocket Motorsports Valve Springs, "turbo"
http://i24.photobucket.com/albums/c21/Vteckidd/pics040.jpg

Coated 85mm CP Pistons courtesy of TBONE
THermal Barrier on sideskirts an domes
http://i24.photobucket.com/albums/c21/Vteckidd/pics039.jpg
http://i24.photobucket.com/albums/c21/Vteckidd/pics041.jpg

Spoolin acting a fool
http://i24.photobucket.com/albums/c21/Vteckidd/pics035.jpg

[BTEC]

sleeving another block i see. try the AEBS with o-rings.

[IntegraXTR]

sweettt, so what car is this goin in?

[BTEC]

freakin wierdo!!

[Vteckidd]

SLeeves are Golden Eagle, B18B block

[SPOOLIN]

lol.

[iloveboost]

Boost > NA

[KevinT707]

The guy in the last picture looks sO gay! :)

[BTLFED]

It was only a matter of time.

Boost > NA

;) :goodjob:

[Vteckidd]

hes on this board, see if you can guess

[iloveboost]

cant wait to see numbers :goodjob:

[SPOOLIN]

The guy in the last picture looks sO gay! :)

ill fuck you like the faggot you are

[KevinT707]

ill fuck you like the faggot you are
Chill homie, I was JK :cool: . BTW who/what car is this going in?

[Vteckidd]

Chassis is not allowed to be disclosed , customer prefers to remain a secret, but he is in this thread right now....

[SPOOLIN]

i was just fucking with you kev. LOL

[99SI]

Some people just can't help being little sell out bitches. Oooooh look I'm gonna throw a T3/.67 HO on my car to be like everybody else that goes fast. psssshhhhh, shit won't crack 12's. :D lol (aimed at a certain individual, spoolin etc. don't get vaginitis over it)

[SPOOLIN]

me? i never started with small motor. cant be a sellout.

in all honesty. ALL motor is ONLY good if competing for REAL in a REAL ALL MOTOR RACING CLASS. for the street, yeah its pointless.

[93H22ACX]

where's the rest of the pics mike :D

hope you get the motivation to finish it before tunerfest:goodjob:

BTW...how come you get the cool stickers for the injectors :confused:

[SPOOLIN]

precision started that shit not to long ago, they put the same lables on their turbos, i was like, wtf, thats so weak when i got my turbo.

[JDMBeau]

blingage.

sooo is this for your car spoolin, or for a "customer" car for MSP

[SPOOLIN]

that turbo is obviously not the one im holding in the pic of me. i could never hold another mans turbo that close to my heart.

[SL33P3R]

damn that turbo sure does look familiar

[99SI]

me? i never started with small motor. cant be a sellout.

in all honesty. ALL motor is ONLY good if competing for REAL in a REAL ALL MOTOR RACING CLASS. for the street, yeah its pointless.
No, you missed what I was saying. It was not aimed at you, it was aimed at another "certain individual that shall remain nameless" that's why I said, spoolin etc don't get pissy about it. It was a joke at the relevant person who you and I know. I just didn't want you or any other turbine heads to think I was really knocking turbos. lol. I should have probably done a better job on the wording.

[SPOOLIN]

LOL, werding owns you.

[99SI]

reading comprehension owns u! :D

[dsrex]

nice

[SpoolBus]

Hey where have I seen that guy before....Ahhhh I got it.....

http://i2.photobucket.com/albums/y1/d00ltaz/dumb07.jpg


Just joking chief dont pop off on me like ya did kevin...... :crazy:

[StupidBikerBoy]

LMAO

[-S Double C-]

^^^ :werd: :lmao:

[SPOOLIN]

lol the resemblance is amazing.

[Vteckidd]

yes this is my new build:

85mm LSVTEC
T3/T67
TDF Turbo Manifold an downpipe
TDF ported cylinder head
Vteckidd assembled Motor

goals are a mere 450whp on pump gas, maybe 600 if i get hte urge for retarded numbers

[99SI]

So you are finally owning up to it huh? :D I guess you are going to have to scrape that "no turbo" sticker off the back of the car huh? lol

[iloveboost]

Now for the big question... what chassis?

[KevinT707]

Huh, I thought "N/A is Best" Mike ? What's the deal here ..

[Vteckidd]

Chassis is not to be disclosed, NA is for wankstas.

[99SI]

fuk u cracka, btw, did you know that Jason Wallace aka AccordM3 is a bitch?

[Vteckidd]

lol

[SPOOLIN]

Huh, I thought "N/A is Best" Mike ? What's the deal here ..

i finally changed his religion.

[99SI]

i finally changed his religion.
so are you the priest and he's the alter boy? :D

[Vteckidd]

*UPDATE*

Block shipping this week along with my new head.

ordering my mounts, tranny, Edelbrock intake, radiator this week. should be done VERY SOOn.

my goals are mild, ill be happy with 450whp on pump gas, 600whp on race gas.

Specs:
85mm LSVTEC
Golden Eagle Godzilla Sleeves
Eagle Rods
CP Pistons 85mm with Thermal Barrier Coating
ACL Race Bearings
GSR head Ported by Turbo Dave
Rocket Motorsports Valvesprings and Retainers (prototype)
Ferrea Valves
Turbo Dave Fabrications Manifold (prototype)
Tial 38mm WG
MSPi Intercooler piping and intercooler
MSPi Exhaust

Chassis:XXX

[SPOOLIN]

where did you get the godzilla block from?

[drmcivicsi]

*UPDATE*

Block shipping this week along with my new head.

ordering my mounts, tranny, Edelbrock intake, radiator this week. should be done VERY SOOn.

my goals are mild, ill be happy with 450whp on pump gas, 600whp on race gas.

Specs:
85mm LSVTEC
Golden Eagle Godzilla Sleeves
Eagle Rods
CP Pistons 85mm with Thermal Barrier Coating
ACL Race Bearings
GSR head Ported by Turbo Dave
Rocket Motorsports Valvesprings and Retainers (prototype)
Ferrea Valves
Turbo Dave Fabrications Manifold (prototype)
Tial 38mm WG
MSPi Intercooler piping and intercooler
MSPi Exhaust

Chassis:XXX


what turbo? for 600 hp wont u need a bigger waste gate ? like a 44mm

[SPOOLIN]

what turbo? for 600 hp wont u need a bigger waste gate ? like a 44mm


t67 and NO, he wont need anything larger than a 38mm for 600+

[NAIZBST]

WTF!!!!!
Chassis is not to be disclosed, NA is for wankstas.
WTF!!!!![

[NAIZBST]

hell I will eventually come to the dark side.....

[Vteckidd]

T3 T67 Turbo for now, might go with a 62-1 soon after

[drmcivicsi]

T3 T67 Turbo for now, might go with a 62-1 soon after

why not go with a GT turbo like a GT35R?

[Vteckidd]

62-1 is ball bearing, cheaper than Garrett, and has a 1 year warranty.

I have done alot of research on Gt35Rs an GT40rs and they are good turbos, but Garrett rarely warrantees them at all, they are a good $300-500 more than turbonetics turbos.

Turbonetics has a 1 year no questions asked warranty.

[GTScoob]

62-1 is ball bearing, cheaper than Garrett, and has a 1 year warranty.

I have done alot of research on Gt35Rs an GT40rs and they are good turbos, but Garrett rarely warrantees them at all, they are a good $300-500 more than turbonetics turbos.

Turbonetics has a 1 year no questions asked warranty.

Thats against everything I've ever seen. I'm not calling BS but I've never heard of a turbo company warranty their BB turbos since they're more likely to fail than a standard turbo. Looks like a sick buildup.

[drmcivicsi]

62-1 is ball bearing, cheaper than Garrett, and has a 1 year warranty.

I have done alot of research on Gt35Rs an GT40rs and they are good turbos, but Garrett rarely warrantees them at all, they are a good $300-500 more than turbonetics turbos.

Turbonetics has a 1 year no questions asked warranty.

oh alrite cool =) good luck on the build man =):goodjob:

[Vteckidd]

The guy i deal with assured me that Turbonetics would warranty their turbos, and in his experience he hasnt had a problem with Turbonetics.

My buddy who deals for garret said he RARELY sees a warrantied turbo

[99SI]

Thats against everything I've ever seen. I'm not calling BS but I've never heard of a turbo company warranty their BB turbos since they're more likely to fail than a standard turbo. Looks like a sick buildup.
Yep that's part of turbonetics marketing for a little while now, they are offering full one year warranty on all turbos whether used for competition or otherwise. Very comforting when you're looking to make big power that a turbo company is going to stand behind their product like that.

[SPOOLIN]

Thats against everything I've ever seen. I'm not calling BS but I've never heard of a turbo company warranty their BB turbos since they're more likely to fail than a standard turbo. Looks like a sick buildup.

Yep, turbonetics warranties against everything except external damages.

*the 62-1 comes in standard or ball bearing options*

[drmcivicsi]

The guy i deal with assured me that Turbonetics would warranty their turbos, and in his experience he hasnt had a problem with Turbonetics.

My buddy who deals for garret said he RARELY sees a warrantied turbo

i guess for my new turbo im going to come to u and get a turbonetics how much whp is a 62-1 good for ?

[Vteckidd]

with a stage 5 wheel you can get 650ish, possibly push it to 700. They also offer water cooled free of charge on the turbo.

[drmcivicsi]

with a stage 5 wheel you can get 650ish, possibly push it to 700. They also offer water cooled free of charge on the turbo.
dont all BB turbos have to be water cooled to?

[93H22ACX]

i have heard you dont necessary need to run water

[drmcivicsi]

aw ok cool thanks for the info man

[GTScoob]

Yep that's part of turbonetics marketing for a little while now, they are offering full one year warranty on all turbos whether used for competition or otherwise. Very comforting when you're looking to make big power that a turbo company is going to stand behind their product like that.

Thats great! I wonder when they'll start making a bolt on WRX turbo . . .