PDA

View Full Version : Turbo kit is done


Curbow_USMC
06-25-2006, 08:15 PM
I am all done with my kit all i have left to do is get it tuned. So here are a couple of pix.

http://i32.photobucket.com/albums/d36/USMCCurbow/100_0312.jpg

http://i32.photobucket.com/albums/d36/USMCCurbow/100_0316.jpg

http://i32.photobucket.com/albums/d36/USMCCurbow/100_0313.jpg

I know there are a few things i need to clean up but that is is for now.
Repost Squintz
06-25-2006, 08:16 PM
nice, stock or swapped engine? what kit or is it custom?
Bruce Leroy
06-25-2006, 08:30 PM
sohc FTW!
Curbow_USMC
06-25-2006, 08:33 PM
Stock motor (D16y7) with a custom kit.
Repost Squintz
06-25-2006, 08:35 PM
u need hondata!
Curbow_USMC
06-25-2006, 08:38 PM
I got chrome
Repost Squintz
06-25-2006, 08:41 PM
^que?
Curbow_USMC
06-25-2006, 08:45 PM
chrome, uberdata... whatever
Repost Squintz
06-25-2006, 08:47 PM
o rly. looks good mang
Curbow_USMC
06-25-2006, 08:48 PM
thanks
Julio
06-25-2006, 09:37 PM
Looks like good work done.. let us know how that DX motor does, I wouldve saved my money, but thats me..

I want to see some numbers.. I think the d16y7 has like 90 whp or less.
Curbow_USMC
06-25-2006, 09:54 PM
haha, yea. i'm not sure about the stock HP. i'm shooting for around 200 though. After i bought the kit i decided that i am gonna save my money and go with a K. So that will be my next big project.
Repost Squintz
06-25-2006, 10:10 PM
haha, yea. i'm not sure about the stock HP. i'm shooting for around 200 though. After i bought the kit i decided that i am gonna save my money and go with a K. So that will be my next big project.
k24 swap +jackson racing super=beast
SpooL'DGsR
06-25-2006, 10:24 PM
^^ agreed!!
EX-Svic
06-26-2006, 12:08 AM
Nice!
Elbow
06-26-2006, 12:32 AM
cool cool
SLOWR/T
06-26-2006, 08:00 AM
looks good mike! ill let you know how it looks in my rearview. :D
Danny
06-26-2006, 09:14 AM
cool..looks pretty good. i think i would have reworked the compresor outlet, its a little fubared, but fixable. Good luck man..
Jecht
06-26-2006, 11:02 AM
Looks good, I always like seeing people modify the engine that is already there, whether people say its crap or not. Major props! :goodjob:
GSXtreme
06-26-2006, 11:03 PM
I see a little DSM power used there
Curbow_USMC
07-29-2006, 11:12 AM
got it tuned my the guys out at mainstream...

here are my #'s. 169WHP 155Ft tq @8-9spi in 105 degree's So i'm sure i have more hp on the road...

THE PAWA..
http://i32.photobucket.com/albums/d36/USMCCurbow/100_0416.jpg

hahaha J/K. here it is @ 8-9 PSI, check out the lines.....
http://i32.photobucket.com/albums/d36/USMCCurbow/100_0432.jpg

I put this down once @ about 10 or 11psi
http://i32.photobucket.com/albums/d36/USMCCurbow/100_0419.jpg

Here is one of the reasons i was only at 169WHP. If you look in the middle of this pic you will see that the temp was 105 in the shop. So i'm prob putting down a little more on the road.
http://i32.photobucket.com/albums/d36/USMCCurbow/100_0424.jpg

More Random pix.....
http://i32.photobucket.com/albums/d36/USMCCurbow/100_0415.jpg
http://i32.photobucket.com/albums/d36/USMCCurbow/100_0414.jpg

I had to take the bumper off because i keep blowing cuplers. I'll need to get some better ones soon.
http://i32.photobucket.com/albums/d36/USMCCurbow/100_0413.jpg
http://i32.photobucket.com/albums/d36/USMCCurbow/100_0408.jpg
http://i32.photobucket.com/albums/d36/USMCCurbow/100_0406.jpg
green91
07-29-2006, 11:27 AM
Respectable numbers, youd probably pull higher HP with a differnet turbo, that little thing runs out of wind up top, but it sure does make for a nice TQ curve. Scottydb has been putting down well over 200+whp for years on his y7.
Curbow_USMC
07-29-2006, 11:55 AM
yea, i went conservative... he is running 12psi on stock internals. i'm just gonna have fun with this till i build another D
RUFFIAN
07-29-2006, 12:03 PM
nice.:goodjob: I can't wait to boost my f-22. having boost is addictive:burnout:
WhiteAccord
07-29-2006, 03:04 PM
Nice custom kit who did it?
Curbow_USMC
07-29-2006, 03:26 PM
i did
StupidBikerBoy
07-30-2006, 06:10 PM
looks nice. decnt numbers too
Curbow_USMC
07-30-2006, 10:18 PM
thanks
crhatchzc
07-31-2006, 03:37 AM
its good to know that people are still doin d16 turbo i cant wait to have mine boosted
1439/2000
07-31-2006, 02:55 PM
Respectable numbers, youd probably pull higher HP with a differnet turbo, that little thing runs out of wind up top, but it sure does make for a nice TQ curve. Scottydb has been putting down well over 200+whp for years on his y7.


Huh? Tdo5h? You can make 300 on a DSM with it. He has low power because its a single cam running low boost on a turbo meant for 20 pounds.
dwnsthGABOY
08-01-2006, 12:02 AM
clean setup mang. Should be a blast to drive.
SLOWR/T
08-04-2006, 04:47 PM
*cough* slow *cough**cough* slow :D
Curbow_USMC
08-07-2006, 06:49 PM
hahahaha, leave it to you to say something like that.