MACHINE SHOP DIRECTORY

[Vteckidd]

With so many question popping up about machine work, i figured this thread would do alot of good.

Please post your machine shop, with contact info, address, what they specialize in etc an ill add it to the list.


1) Scots Machine Shop
359 E Lanier Ave
Fayetteville, GA
770-461-9313
-bore, hone, balance, recondition, deck and mill
Import and Domestic

2) Ball Engine Parts & Svc Co
85 Arcado Rd NW
Lilburn, GA
770-279-7881
-bore, hone, balance, recondition, deck and mill
Import and Domestic

3)Turbo Diesel & Electric Systems Inc.
231 Main St
Forest Park, GA 30297
(404) 361-2222

4) Larry Smith Automotive Machine Shop
20 Bale Street Southwest, Rome, GA 30165
(706) 295-3121
Boring, Honing, Assembly, Decking, line honing, Head services, really anything except high end head work stuff.

5) Dixie Performance Machine
60 Sims Street, Mcdonough, GA 30253
(770) 914-7223
Toby

6) GOZA Auto Parts & Machine Shop Inc
4391 South Main Street, Acworth, GA 30101
(770) 974-2088
Tommy

7) DFE Enterprises
8538 Mallory Rd Unit #1
Jacksonville, FL 32220
Contact Mainstream Performance for inquiries
-Golden Eagle sleeving, Bore, Hone, Balance, Engine Dyno, Assembly, Head Porting

8)Eagle Automotive Machine Shop
"Aluminum Cylinder Head Repair Specialist"
1240 Hwy 8
Auburn, GA. 30011
770-339-3053
770-339-0698 (Fax)
E-Mail [email protected]
eagleautomotivemachine.com

9)Red Star Performance
30 Haynes Creek Circle
Oxford, GA 30054
4045388971-Eli Koorey (owner)
[email protected]
bore/hone, balancing, assembly, import/domestic. probably more but this is what i'm getting done.

10)Ewing Automotive Machine Service
2321 Parkwood Road
Snellville, GA 30039-4003
Phone: (770) 972-1892
Business Types: Engine Rebuilding, Repair & Exchange, Machine Shops

11)ERL Performance
www.ERLPerformance.com
ERL PERFORMANCE, INC.
P.O. Box 1026
2560 Charlestown Road
New Albany, Indiana 47150
Phone: (812) 948 - 8484

[SLow_POke]

i know its not local hope it counts

ERL Performance
www.ERLPerformance.com (http://www.erlperformance.com/)
ERL PERFORMANCE, INC.
P.O. Box 1026
2560 Charlestown Road
New Albany, Indiana 47150
Phone: (812) 948 - 8484


Fax: (812) 944 - 8808 [email protected] ([email protected])
hondas blocks mainly

[99SI]

Good thread to have stickied.

[IntegraXTR]

:werd:

[RandomGuy]

Have good experience with Ball. Reasonable prices and quick turnaround there as well. Quality work.

[Xrated O.G.]

Eagle Automotive Machine Shop
"Aluminum Cylinder Head Repair Specialist"
1240 Hwy 8
Auburn, GA. 30011
770-339-3053
770-339-0698 (Fax)
E-Mail [email protected]
eagleautomotivemachine.com

[Double1Trey6]

NAPA on peachtree industrial also have a machine shop

[nitrousfed]

CHASTAIN"jonesboro " isnt bad good prices "

[Crit]

Absolute best shop to work with, and very good about developing custom parts if there's a market:

MRC Manufacturing in Lawrenceville
http://www.mrcmfg.com/

There's also Dutton & Hall on Northside downtown,

[redlinenprelude]

Ewing Automotive Machine Service
2321 Parkwood Road
Snellville, GA 30039-4003
Phone: (770) 972-1892
Business Types: Engine Rebuilding, Repair & Exchange, Machine Shops


i have had a lot of work done here and all of my friends take there stuff here.. he stands behind all of his work!

[CiViC-GTR]

thanks dawg, thats tite

[CiViC-GTR]

yo, how you give rep on dis importatlanta, cus this is mad tite

[HiPSI]

this is who's rebuilding the LS1 right now. i'll let you guys know the results when i get it back but he's been super to work with thus far. it's over near the horse park in conyers.


Red Star Performance
30 Haynes Creek Circle
Oxford, GA 30054
4045388971-Eli Koorey (owner)
[email protected]
bore/hone, balancing, assembly, import/domestic. probably more but this is what i'm getting done.

[Stopsnitchin]

anybody ever use any of these machine shops? good or bad experience?

[SPOOLIN]

most of them were submitted by people that have used them, i know the one i submitted it the one i use but hes only local to about .009 percent of the people on this board.

[Rabid Lemmin]

Place in Cumming has a machine shop...

PFM Engineering
5172 Performance Drive
Cumming, Georgia 30040
770-888-3331
http://www.pfmengineering.com/

[okriskao]

Is there a shop around Gwinnett area where I can go to do something simple like installing HIDs and stuff like that?

I went over to Ball and they say they only do engines. So I went to the shop beside Ball called OTS to see if they can do my Xenondepot lights. The guy said he been doing cars for around 16 years. I ended up with one of my driver side not turning on at all and my passenger side light going off on my way back home, and $100 poorer. That guy just said that my kit is sh!tty (I've never heard or read about any complaints against Xenondepot).

Anyways, I dun wana mess up my lights any more than he did so I wana find someone more professional and trustworthy to help me see if he did a bad connection and try to fix what he had done. Anyone living around Atlanta or Gwinnett county please help by recommending some shops I can go to. Thanks!!!

[2shroom]

Thank God for post like this

[JDMirza]

Here's one around the lawrenceville area.

Gwinnett Machine and Fabrication
931 North Clayton Street
Lawrenceville, GA
(770)-963-6526
- Bore, hone, balance, recondition, deck and mill
Domestics, and Imports

[Civictyper95]

sorry about what happened man..... but heres a shop that can help

Platinum Auto Accessories

2556 Wesley Chapel Rd Decatur, GA 30035

(770) 808-3300



Is there a shop around Gwinnett area where I can go to do something simple like installing HIDs and stuff like that?

I went over to Ball and they say they only do engines. So I went to the shop beside Ball called OTS to see if they can do my Xenondepot lights. The guy said he been doing cars for around 16 years. I ended up with one of my driver side not turning on at all and my passenger side light going off on my way back home, and $100 poorer. That guy just said that my kit is sh!tty (I've never heard or read about any complaints against Xenondepot).

Anyways, I dun wana mess up my lights any more than he did so I wana find someone more professional and trustworthy to help me see if he did a bad connection and try to fix what he had done. Anyone living around Atlanta or Gwinnett county please help by recommending some shops I can go to. Thanks!!!

[BABY J]

I need some rods shot-peened. Can any1 make some suggestions?

1977 Honda Eb3 rods. New in box. Thank you.

[Nick Jeezy]

Mcintosh Performance
Cumming Ga 30040
5114 Performance Dr
(678) 513-4500


i work there. we are a full machine shop. come by or give us a call.

[Nick Jeezy]

:goodjob:please add to the list

[VickNotic]

8)Eagle Automotive Machine Shop
"Aluminum Cylinder Head Repair Specialist"
1240 Hwy 8
Auburn, GA. 30011
770-339-3053
770-339-0698 (Fax)
E-Mail [email protected]
eagleautomotivemachine.com

this dont exist i mean online .. i've tried it out online.. and plan on using them for some jobs.. hmm any clear this up ..

[wwli]

Any shop around the Cobb county area that can shave some material off the brake caliper mounting bracket so I can have some bigger brakes?

Thanks in advance.

[Wikedeye]

Has anyone used KMS before?

[BABY J]

^^ waits for Mike - LOL

[Skillet]

anybody know a shop that will assemble my GSR block for me

[EFlove]

I am not sure if anyone has suggested American Precision Machine Shop, but they are who I go through. They do everything but PnP and assembly, and they do impeccable work. They are located off GA 85 in East Point. 404-768-8830

[Sport1.3]

Anyone local to the Kennesaw/Acworth area?

I need a head resealed and assembled

[Total_Blender]

I highly recommend Larry Smith in Rome, GA (his contact info is already posted up top). He really knows his stuff and his prices are great. I had him rebuild a Ford straight six not too long ago and I'm very happy with it. :goodjob:

[benny.boom]

really like the thread and great suggestions. but are there any reliable shops closer to the metro area?? would like to not have to drive 2 hours to go to a shop..

[Init2winit]

really like the thread and great suggestions. but are there any reliable shops closer to the metro area?? would like to not have to drive 2 hours to go to a shop..Superior parts and machine

[RickyBobbyV6]

Collins Machine shop
217 B south 3rd street
griffin, Ga 30223
770-227-6144
imports & domestics

[xdavidscenex]

any good shop for ka24de?

[mijerz730]

where in the atlanta metro north fulton,gwinett(25mile)

can i have a cylinderhead or engine block o-ringed to .020-.035

Bore 1mm .40 over
new main,thrust,rod bearings
P&P,3 angle valve job valve guides
camshaft reground custom spec

1994 suzuki swift gti open-deck block type

[Big Baller]

any good shop for ka24de?

Ball Engine builds a lot of KA24DE Race Motors, I'm sure David can take care of you.

[OTG Signs]

Pro-Line builds drag cars. Those tend to carry more weight than Turbo 4's for good machining.

[Big Baller]

Pro-Line builds drag cars. Those tend to carry more weight than Turbo 4's for good machining.

What

[Cory96EK]

does anyone kno of any shops in columbus ga . because some people say there are and others say there arent.......antone with some accurate info...:dunno:

[AlliRae]

I know they do a lot of high horsepower Ford engines- but I know IA member "roadster" works there. Good guys - met them - seen what engines they do. Would recommend to anyone.

Engine Systems, INC. 2256 Fourth Street Tucker, GA 30084 PH(770) 491 - 0583

[bigdare23]

After talking to Spoolin, I decided to use Larry Smith Automotive Machine Shop to get my work done. The prices themselves are well worth the 1.5hr drive. I can't speak on the quality yet, because I haven't picked up my motor. I keep everyone posted.

[pixyspoxey]

I can speak for Scott's in Fayetteville. Top Notch work and a great turn around time. I had all of my machine work done there for my 351W. Align Honed, Bored .030, Torque plate honed, Rods Resized, Crank turned .10/.10, Decked and the rotating assembly balanced. Great group of guys there.

[jojeezek]

Goza Auto Parts & Machine Shop
4391 S Main St
Acworth, GA 30101-5542
(770) 974-2088

THESE PEOPLE KNOW WHAT THEY ARE DOING~THEY WILL GIVE YOU THE BEST ADVICE~THE PRICES ARE SUPER LOW. Tell them Jay sent you.....

[jojeezek]

Goza Auto Parts & Machine Shop
4391 S Main St
Acworth, GA 30101-5542
(770) 974-2088

GREAT PRICES>GREAT ADVICE>THEY KNOW WHAT THEY ARE DOING!!!!

[95integra123]

good idea

[froyotlbw88]

R & R Speed & Machine Shop
106 Maple Avenue NW
Huntsville, AL 35801
(256) 539-0824

[Stancil1216]

Atlanta Speed Shop

Complete Machine Service
Supercharger Service
Dyno & Flowbench Testing
Blown Alchol Specialist
Aluminum Block Repair
Cylinder Head Repair

(770) 534-1560
1572 Fullenwider Rd, Gainesville, GA
www.atlantaspeedshop.com

[eg mike]

Scotts Machine Shop does very good quality work!!! There are not that cheap but you get what you pay for sometimes..

[Init2winit]

Scotts Machine Shop does very good quality work!!! There are not that cheap but you get what you pay for sometimes..You're right about that! You pay for junk, and they give you some of the best junk there is. Anyone that thinks Scotts machine shop does good work, doesn't know the difference between good and bad. If you only knew all of the stuff that I've seen, and had to fix, that came out of that machine shop.

[dragoncelica]

Eagle does great work but they are too expensive, and charge for things they shouldn't!

Personal experience, they charge me for cleaning, a staggering ammount of $150 on a head and a block that where personally cleaned to perfection and rifle brush all oil galies by me, even after a said so, the reason they give me... we always wash and clean everything that came here, they charge me for installing and remove the main studs for the align hone $5 each stud, each way, thing that they have to do anyways to do the job, plus they charge me for the job the same with the head studs to hone with the block plate, thing that got to be done to do the job anyways, what a bunch of douches rednecks, for a line hone bore and hone and deck job on the block and head on a 2JZ $1300 the rip me off, the job was perfectly done and within custom tolerances all around but, IMO way too expensive, for a non balanced work cuz i had the rotating assembly already balanced and completlly done by GOZA.

My next jobs all are going to GOZA in Acworth!

[ed1380]

MTI racing in marietta has a machine shop.
They do most of the work for forged
1190 Hayes Industrial Dr.
Marietta , Ga. 30062