PDA

View Full Version : FS:cams,swaps,header, blocks, H/D/B series



Vteckidd
03-08-2005, 10:05 AM
I got shit that has accumalated in my garage and at the shop in the last few months. heres what i got

1) Built GSR SWAP- GSR block with ITR pistons, GSR head, Skunk2 intake manifold, DC header, B16 Tranny with Fidanza Flywheel and Bulley clutch. JDM GSR motor , NO VIN, block code =2307668

$3000 obo, never smokes, compression is 190 across the board. fresh rings in it 5000 miles ago. made 180whp on knowledge performance DynoPack with hondata.

2) 2000 EX tranny 5 speed-PERFECT 15k-$200 obo

3) 3 D15 obd1 blocks in PERFECT shape-$75 a piece

4) 1997 DX tranny-needs input shaft bearing-$50 no grinds

5) 2 D15/D176 NON VTEC heads-$50 a piece

6) ITR pistons, .20 over -comes with rings ,wrist pins Nippon Racing-$130 obo

7) Skunk2 Stage 2 Camshafts used for 5000 miles-$500 FIRM

8)H22 COMPLETE LONGBLOCK- comes with distributor, intake manifold, header, everything, 5ok miles-$1000 FIRM. 1998 year model motor
block code-4681950
9) BARE h22 block,mains, needs to be sleeved-$100 firm

10) JDM GSR Block, bare, mains, pick up, crank-$200 obo

11) H22 Complete Bottom end-$500 H22 complete Head-$350
blcok code-2957437
12) B20B complete shortblock-$550 FIRM
block code 3245859

soul
03-08-2005, 10:07 AM
wanna part out the tranny?

Vteckidd
03-08-2005, 10:12 AM
wanna part out the tranny?
which tranny, the one from the swap, sure , it has LSD and a $900 clutch, an no grinds, $1000 FIRM

CTR LSD
Bulley Clutch and Fidanza Flywheel

B16a2 Civic
03-08-2005, 10:20 AM
that gsr sounds nice...how much w/ a trade with my b16a2...only 61k miles on this motor

Vteckidd
03-08-2005, 10:23 AM
that gsr sounds nice...how much w/ a trade with my b16a2...only 61k miles on this motor
your motor plus $1000

Vteckidd
03-08-2005, 04:15 PM
bump

atlludeguy
03-08-2005, 06:36 PM
Hit me up do you know if that h22 longblock is from an sh model.


Call asap if it is an sh I will buy tuesday the 15th

770-317-0642

ATK_Designs
03-08-2005, 06:46 PM
can u let the Bare H22 block + Full H22 head go for 400?

atlludeguy
03-08-2005, 06:59 PM
hey interlude you know where I can look up the block code to see if it is from an sh?

K24cb7coupe
03-08-2005, 10:44 PM
I want to look at the bare block?

Goinfasterthanu
03-09-2005, 05:52 PM
I want the tranny ... I got $ in hand ..call me at 404-247-6713..ask for jeremy...Ill come get it if my slow ass car can make it..

superman
03-10-2005, 08:45 AM
interested in the gsr head with skunk 2 intake manifold if ur willing to separate it from the block also do u have a gsr tranny pm me, also willing to buy gsr bare block. Give me a call 404-819-2838

Vteckidd
03-10-2005, 09:57 AM
guys, CALL ME 678-697-2704, i have two jobs an i cant call everyone. also tell me WAHT PART YOU WANT, dont say "i want the tranny" cause i have several for sale, do you want the EX,DX etc. ;)

Complete Prelude longblock is an SH

GSR BAR BLOCK pending sale

GSR swap PEnding sale

I cant do $400 for the bare block an complete head

ATK_Designs
03-10-2005, 03:12 PM
you can't do 400 for those 2, Bare block (100) and COmplete head (350)? I'm not talking about a complete block and head together.

BlkTegGsr
03-10-2005, 03:16 PM
I want the skunk2 intake manifold

atlludeguy
03-10-2005, 03:39 PM
guys, CALL ME 678-697-2704, i have two jobs an i cant call everyone. also tell me WAHT PART YOU WANT, dont say "i want the tranny" cause i have several for sale, do you want the EX,DX etc. ;)

Complete Prelude longblock is an SH

GSR BAR BLOCK pending sale

GSR swap PEnding sale

I cant do $400 for the bare block an complete head


Man I wish there was a way for me to look up that block id number I want that 98 h22 longblock but am extremely worried that I will get screwed. Not by you but I am beginnig to realize tat the mofo that sold me the car knew about some kind of engine problem and my atts light is always on so its making me think he dropped a base model motor and tranny in there. Damnit I wishI could get some help on this. The freaking mechanic that has my car is not being helpful and I can't get the car back till tuesday when I get paid. I think he is pissed that I want to get the motor and parts myself. He wants to make more money off me when I am not willing to shell out one penny more for parts I know are cheaper. What a bastard. :2up: Hit me up I left yo a mesage.

Thanx man ,

Ken

Vteckidd
03-10-2005, 03:55 PM
Man I wish there was a way for me to look up that block id number I want that 98 h22 longblock but am extremely worried that I will get screwed. Not by you but I am beginnig to realize tat the mofo that sold me the car knew about some kind of engine problem and my atts light is always on so its making me think he dropped a base model motor and tranny in there. Damnit I wishI could get some help on this. The freaking mechanic that has my car is not being helpful and I can't get the car back till tuesday when I get paid. I think he is pissed that I want to get the motor and parts myself. He wants to make more money off me when I am not willing to shell out one penny more for parts I know are cheaper. What a bastard. :2up: Hit me up I left yo a mesage.

Thanx man ,

Ken
I have a FULL SH swap, with the atts tranny. if it is not an SH i will give you your money back. YOu can come look at the motor before you buy. ITS CLEAN. I will be at gwinett fuddruckers tonight for the Importlounge meet if you want to talk inperson, ill try to call you when i get off work

93H22ACX
03-11-2005, 10:20 AM
mike is a good guy. he sells legit stuff and a honest business man.

mike i want that h22 head and gsr block with crank. give me a call right now at work 678-297-5260.

Vteckidd
03-11-2005, 02:55 PM
mike is a good guy. he sells legit stuff and a honest business man.

mike i want that h22 head and gsr block with crank. give me a call right now at work 678-297-5260.
will do Bee. hey you going to comemrce tonight? ill bethere.


GSR SWAP IS PENDING SALE

GSR BLOCK IS PENDING SALE

H22 LONGBLOCK IS PENDING SALE

H22 HEAD IS PENDING SALE

93H22ACX
03-11-2005, 02:58 PM
H22 HEAD IS PENDING SALE

to me right? better be lol

i'm not going but peter will be there. hoping to see some low low 10's or atleast one 9 second pass before he gets kicked out.

Vteckidd
03-11-2005, 03:06 PM
to me right? better be lol

i'm not going but peter will be there. hoping to see some low low 10's or atleast one 9 second pass before he gets kicked out.
HAHA, sweet, ill be there, you should make it out man, debuting my white CX tonight ;)

93H22ACX
03-11-2005, 04:05 PM
YOUR 2.0L???? damn i want to come but cant. got to go buy furniture for our new house we just bought :(

Vteckidd
03-12-2005, 08:29 AM
congrats on the purchase! man ididnt go, i was on the way up there when jenson called an told me it was only 1/8th mile so i went home lol

krisjun2002
03-13-2005, 11:06 AM
yeah, im lookin to buy that block too, since the first day you posted it up on import lounge......im dohcsi

93H22ACX
03-15-2005, 12:42 PM
mike...so are you guys selling me the head? i need it

ATK_Designs
03-15-2005, 12:48 PM
ey Mike, what you think about the H2 bare block and the Full head. Like I asked before everyone else, I'm interest in those 2. LMK.

93H22ACX
03-15-2005, 12:50 PM
got dips on the head :crazy: (hopefully)

white teg
03-15-2005, 07:33 PM
b20b is just the complete block that all and the mileage and condition.

Vteckidd
03-16-2005, 11:00 AM
as i said everytihng is PENDING SALE that i have listed, everything else is still up for grabs, the H22 head is pending sale to Bee

93H22ACX
03-16-2005, 11:01 AM
tight