wire tuck

[typerek]

how much does a wire tuck cost? does anybody do it? anybody know where i could find directions how to do it myself? thanks!

[2.0civic]

honda-tech had a article on it not to long ago

[i4_garage]

wire tuck and bay shavings....clean as hell!

[typerek]

if you can get me a link that would be great.

[B18c1Turboed]

I did the wire tuck on my 96 Civic Ek. the 1st harness i messed up on i extended all the wires and made them too long.

2nd harness all i did was cut the loom off and rearrange some wires around. put new loom on all the wires and i was done costing me 10.00

im in the process of shaving the engine bay now,by welding and grinding it.


Link to h-t is

http://www.honda-tech.com/zerothread?id=1401203

[BABY J]

JACKDARIPPER does it for $300 I think, to include relocating fuse panel inside of the car.

[SLow_POke]

:goodjob:
I did the wire tuck on my 96 Civic Ek. the 1st harness i messed up on i extended all the wires and made them too long.

2nd harness all i did was cut the loom off and rearrange some wires around. put new loom on all the wires and i was done costing me 10.00

im in the process of shaving the engine bay now,by welding and grinding it.


Link to h-t is

http://www.honda-tech.com/zerothread?id=1401203:bigok:

[B18c1Turboed]

JACKDARIPPER does it for $300 I think, to include relocating fuse panel inside of the car.


Damm ill do it for 150. That shit is hella easy, ill even relocate the battery for you!!

I removed the airbags from my car, all you do is unplug the fuse box from underneath the box and push the wires thru the firewall.
Then plug the box back in and then bolt it down. Takes 10 mins.

The hardest part was the wiring, eveything else was easy!!! Im sorry you have to extended the Injector wiring like 4 inchs and the IAT temp wire also.

[BABY J]

^^ then you gotta job!!! PM ME!!!

[JDMBeau]

i do it for 200 if you bring the car to me and leave it for 2 days.

also depends on turbo, allmotor, if you have ac or not blah blah blah

ive done EF's EG's, BB6, looking for an EK to do

[B18c1Turboed]

I can do it in 1 day!!! But i wont!!
Im not a shop and i hate working on other peoples cars if there not mine, or bees or alfonso or peters!!!