View Full Version : Handling Mods 4x100 to 4x115 pattern?
trythefly
05-09-2005, 09:44 AM
Hey I'm looking into just keeping my Rota's and putting them on the Sentra. Does anyone know of an adapter plate to change the lug pattern?
trythefly
05-24-2005, 12:04 PM
nobody knows!
speedminded
05-24-2005, 12:40 PM
you mean 4 x 114.3?
trythefly
05-24-2005, 12:49 PM
yes
speedminded
05-24-2005, 01:04 PM
just about any shop around can order them for you, it will act like a spacer though and bring your wheels out a 1/2" or more....
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7975854796&category=42614&sspagename=WDVW
http://members.aol.com/imagiasian/4x100
trythefly
05-24-2005, 01:08 PM
wow those are thick as hell. Fuck that I'll just sell them. Can't have any car I own looking like it rolled off buford hwy....
trythefly
05-24-2005, 01:19 PM
thanks btw....
HiPSI
05-24-2005, 09:14 PM
measure the offset/backspacing of the wheels you have and then measure the car from the hub to a straightedge sitting vertical from the fender to the ground. they may fit nice and flush with the spacer adapters.
yudalicious
05-27-2005, 10:46 PM
its usually not advised to have a bolt on spacer to change the bolt pattern, I don't have any personal experience, but that's what I've been told by experts (www.wheeladapter.com), they know their stuff.
HalfBaked
05-28-2005, 11:37 AM
What rotas do you have?
speedminded
05-28-2005, 02:32 PM
What rotas do you have?i think they are 18" subzero's with black centers...you may be able to find them in the forsale section.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.