bybyevo
06-12-2006, 01:44 PM
1991 Ford Mustang LX coupe
5.0 5speed 80k on motor and car
engine-
stock block with new pistons
edelbrock performer rpm heads
holley systemax intake manifold
Ford racing f303 cam
75mm performance products throttle body and intake manifold
30lb. injectors
granitelli mass air sensor
255 intank fuel pump
bbk cai
ford racing alumium radiator
black magic electric fan
Drivetrain
tremec tko 500 5speed
king cobra clutch
steeda short shifter
upr clutch cable and quadrant
ford racing alumium driveshaft
5 lug conversion
3.73 gears
31 spline moser axles
ford racing rear end cover
driveshaft loop
Suspension
ford racing lowering springs
kyb gas shocks and struts
upr subframe connectors
upr double adjustable upper and lower control arms
mac camber/ caster plates
welded torque and battle boxes
Exhaust
mac 1 5/8 headers
mac h-pipe
mac mufflers and turndowns
also have a cats w/h-pipe and a x-pipe
other
17x9 chrome cobra r's
nitto 555's 75 percent tread
autometer shift lite
msd shift module
panasonic head unit
infinity componets in front
infinity speakers in back
all work less than a year old. all work done by prospeed performance in powder springs. Jeff harris worked and dynoed the car.Tuned at 318rwhp and 324 ft/lbs.
will post more and better pics soon. 11k nego. offer trades.
http://myspace-113.vo.llnwd.net/00592/31/15/592265113_m.jpg (http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=65044610&imageID=592265113&MyToken=ff39e55b-51b7-4048-bde4-8fa909b87b54)http://myspace-466.vo.llnwd.net/00594/66/42/594342466_m.jpg (http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=65044610&imageID=594342466&MyToken=ff39e55b-51b7-4048-bde4-8fa909b87b54)
5.0 5speed 80k on motor and car
engine-
stock block with new pistons
edelbrock performer rpm heads
holley systemax intake manifold
Ford racing f303 cam
75mm performance products throttle body and intake manifold
30lb. injectors
granitelli mass air sensor
255 intank fuel pump
bbk cai
ford racing alumium radiator
black magic electric fan
Drivetrain
tremec tko 500 5speed
king cobra clutch
steeda short shifter
upr clutch cable and quadrant
ford racing alumium driveshaft
5 lug conversion
3.73 gears
31 spline moser axles
ford racing rear end cover
driveshaft loop
Suspension
ford racing lowering springs
kyb gas shocks and struts
upr subframe connectors
upr double adjustable upper and lower control arms
mac camber/ caster plates
welded torque and battle boxes
Exhaust
mac 1 5/8 headers
mac h-pipe
mac mufflers and turndowns
also have a cats w/h-pipe and a x-pipe
other
17x9 chrome cobra r's
nitto 555's 75 percent tread
autometer shift lite
msd shift module
panasonic head unit
infinity componets in front
infinity speakers in back
all work less than a year old. all work done by prospeed performance in powder springs. Jeff harris worked and dynoed the car.Tuned at 318rwhp and 324 ft/lbs.
will post more and better pics soon. 11k nego. offer trades.
http://myspace-113.vo.llnwd.net/00592/31/15/592265113_m.jpg (http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=65044610&imageID=592265113&MyToken=ff39e55b-51b7-4048-bde4-8fa909b87b54)http://myspace-466.vo.llnwd.net/00594/66/42/594342466_m.jpg (http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=65044610&imageID=594342466&MyToken=ff39e55b-51b7-4048-bde4-8fa909b87b54)