EG9 *Under Construction*

[speedminded]

I did the paint in the backyard for 'ratedEG' several weeks ago (1/3 Primer, 1/3 epoxy catalyst, 1/3 reducer) and put on the wheels today. "Mild" LS and it can't wait for boost and Ferio interior... :)

[thinkskater]

u have good taste in cars

[Ex_Vtec_Girl]

Clean! Well, except for the finger prints on the black plastic piece behind the front passenger side window. As anal as you are, you should be ashamed of yourself!!! :D Just kidding...nice pics!

[ratedEG]

Nice pics Jason for 5 minutes at Advanced Auto. What it looked liked in 2001 :o

[efman]

when did you get that ? nice man

[speedminded]

when did you get that ? nice manRoommates ride [ratedEG], fixing it up a little bit at a time: swap a couple months ago, paint a few weeks ago, and next is a GS-R brake conversion...just trying to be a little differant with a 4 door.

[efman]

well its nice man props to you

[Pher]

Lookin good with the Cut 8's on there! Is that a perm thing as far as the swap?

[speedminded]

Lookin good with the Cut 8's on there! Is that a perm thing as far as the swap?English beaner! oh, the wheel swap? Those aren't Adrian's wheels....traded jimmy his C8's for the slips.

[Bishop]

ehh i can still see the license plate lol. But looks good :goodjob:

[bigdare23]

hey where did you get the 4dr lip? I'm looking for one for my girl's car. Oh yeah the car is only missing a mugen ferio wing and it would be hard as hell!!!

[speedminded]

hey where did you get the 4dr lip? I'm looking for one for my girl's car. Oh yeah the car is only missing a mugen ferio wing and it would be hard as hell!!!jdmshit.com for $80 but the price went up to $120 a few weeks ago.

[b18hb]

nice job. what are your rates (minus the cost of materials) for a one color paint job on a small car (exterior and jambs)?

[speedminded]

nice job. what are your rates (minus the cost of materials) for a one color paint job on a small car (exterior and jambs)?Buy me a bigger air compressor and i'll do it for free :D otherwise i'm not really in the painting business, my shops not set up for it and prepping most cars takes way too much time to make it worthwhile...

[b18hb]

Buy me a bigger air compressor and i'll do it for free :D

lol, what are you using? surely not one of those little pancakes?

[speedminded]

lol, what are you using? surely not one of those little pancakes?naww, it's a decent size...it's just 50 years old, really quiet but builds up pressure slowwwwly. The big gauge on it is from a WWII navy ship ;)

[Bishop]

naww, it's a decent size...it's just 50 years old, really quiet but builds up pressure slowwwwly. The big gauge on it is from a WWII navy ship ;)
know what cfm its rated at?

[b18hb]

naww, it's a decent size...it's just 50 years old, really quiet but builds up pressure slowwwwly. The big gauge on it is from a WWII navy ship ;)

well, shoot dude, pm me a link of something reasonable, and we may be able to work something out within a couple months.

[speedminded]

know what cfm its rated at?I don't have a clue...i ran a regulator in-line set at...hell, i can't remember...just kept adjusting everything until i could get a decent spray. I don't even have a water removal filter on it :tongue:

Actually, you're gonna laugh..i sprayed one 1/2 then turned the car around and sprayed the other (sunlight and breeze were factors) then it got rained on before it was put inside...It had water spots on it so I wiped down & resprayed the entire car with a Krylon rattle can the next day because i was out of the epoxy catalyst :tongue:

[efman]

I don't have a clue...i ran a regulator in-line set at...hell, i can't remember...just kept adjusting everything until i could get a decent spray. I don't even have a water removal filter on it :tongue:

Actually, you're gonna laugh..i sprayed one 1/2 then turned the car around and sprayed the other (sunlight and breeze were factors) then it got rained on before it was put inside...It had water spots on it so I wiped down & resprayed the entire car with a Krylon rattle can the next day because i was out of the epoxy catalyst :tongue:
dude thats awful lol umm dont you get oil and water all in your gun and paint

[speedminded]

dude thats awful lol umm dont you get oil and water all in your gun and paint*looks around for the person that cares* ...lol. $80 paintjob (materials) and 3 hrs of work total. If i was actually making any money off doing this (i hate doing bodywork) then it would be a whole differant story. I'm not in the painting business, just randomly do stuff when i feel like it and anything short of rolling paint on this car would have made it look better :tongue:

[NAIZBST]

nice

[ratedEG]

thanks for takin the shots. u made my car look hot! cant wait to do the brakes

[speedminded]

thanks for takin the shots. u made my car look hot! cant wait to do the brakesOnce it's done we should do a small vinyl list on a window or something with how much has been spent on the car...engine, wheels, paint, brakes, turbo, etc. with the last line being "Beating you - $Priceless$" :tongue:

[IntegraXTR]

damn it looks good man, great pictures too, can't wait to see this car completed.

[speedminded]

damn it looks good man, great pictures too, can't wait to see this car completed.still need your car shot? Wouldn't take but a few minutes a couple miles down the road.

[IntegraXTR]

hell yeh I do, you talkin about the advance on 29? if so I'm up for it today if you are, but get out of work at 6pm.

[speedminded]

hell yeh I do, you talkin about the advance on 29? if so I'm up for it today if you are, but get out of work at 6pm.Right at sunset is fine or if it's overcast, if it's dark then we can go over by my other place just down the road...

[Nemesis]

sweet pics man!

[speedminded]

sweet pics man!thanks, right after i posted them i saw your pics of alex and dp's pics... :( :goodjob: lol, i was like i realllyyy need to invest some, say in a camera that will actually screw to a tripod :tongue:

[EJ_Allmota]

dAmn!. Dat shit looks clean, I believe i took a pic of it at the Varsity. Did it have Silver 15in Slipstreams on it?

[speedminded]

dAmn!. Dat shit looks clean, I believe i took a pic of it at the Varsity. Did it have Silver 15in Slipstreams on it?yep, i think skip mentioned seeing the pic but black car at night doesn't exactly do so well for pics under dim lights.

[speedminded]

=| i got competition..:2up:oh really? when was yours painted...this one is now a dark metallic blue and sold ;)

[Evil Goat]

=| i got competition..:2up:


no you got a lack of comprehension skills

[cactusEG]

damn son, u know what ur doing with ur car:goodjob: are u ganna get that side molding fixed on the fender

[speedminded]

damn son, u know what ur doing with ur car:goodjob: are u ganna get that side molding fixed on the fenderA few months after the pics the molding was fixed, a few Ferio parts were put on, and the car was painted back to the original dark blue metallic that matched the door jambs and under the hood...If you only knew what the car looked like before removing the body kit, cleaning it up, putting on the C8's, and my "satin" black spray job covering the 5+ year old baby blue with mismatched fenders :tongue:

[ORGANIZATIONXIII]

new pics!

[Sol-Badguy]

Necropost!!

[speedminded]

new pics!lol, my old sony point and shoot...5mp T1 that could fit in a shirt pocket.