View Full Version : s15 healical diff
s14_kouki_drifter
05-03-2006, 05:29 PM
Well i bought a s15 healical diff and well some crap happend and i need to sell it and i want to do some injectors and a super afc .... but i am just lookin to get what i payed ...roughly 600 it also comes with brand new nissan output shafts ... should sell quickly but hit me up on my cell 404 455 0237 caleb or pm me on here ...the diff was never installed in my car and is sitting in my room as i will post pics up tonight if not tommorow .
PSINXS
05-03-2006, 05:40 PM
put this in the car parts section more ppl will see it.
240s are gay. i have one.
skillzilla
05-03-2006, 09:11 PM
will go right into an S13 pumpkin, ya?
1439/2000
05-03-2006, 09:13 PM
To use the full s15 diff you need the driveshaft which goes to the 6 speed....
sebastianHoff
05-03-2006, 10:46 PM
if it comes with bearings, seats and seals then its a pretty good deal. since hes got the shafts too it will bolt straight into the r200 no problems. that being said, installing an lsd isnt exactly the easiest mod to do, there is a bit of finess involved.
TheSnail
05-04-2006, 04:26 AM
I just sold my friend my car to part out, which he sold the almost new (19k) s15diff, and s15turbo and turbomani and hks J-pipe for 1k. I slapped him in the face because, well you know why. Anyways, the s15diff uses the same axels as the s13, and as for the driveshaft, it’s the same. But if you are using a 6spd. Then you need a custom driveshaft for the s13, but if you have a s14 then you can use the s15 drive shaft. * I have a spare one for you s14 owners*. On the side note, I was very happy with the HLSD, for my new project, I WILL buy it again.
s14_kouki_drifter
05-04-2006, 10:20 AM
yeah its ready to be dropped in as stated before but i would highly shuggest some one qulaified to install it and the driveshaft you dont need . But comes with the output shafts and will fit a s13 , s14
sebastianHoff
05-04-2006, 11:42 PM
ok guys time out, lets not confuse people. your selling just the helical lsd, right? with output shaft, bearings, seats, and seals? that being the case, you can install this unit in your s13/s14 rear diff with no moddification to the driveshaft or axles. it is a bolt on affair, but is by no means an easy one.
s14_kouki_drifter
05-05-2006, 01:44 PM
yes all you nned to do is bolt it up .
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.