SRT-4 vs Trans AM

[SpoolBus]

VIDEO POSTED BELOW!!!!!!!!

Well first big ups to speedmonkey, kevin, boris and all the others at the Gwinnett meet last night, good to meet some new (good) peeps......

Anyway we are all just hanging out talking when these two kids pull up in a black (maybe 03) trans am with black rims reving it and all the usual. Well the passenger comes right up to me pushing me to run his buddy...at first I'm thinking is this a cop because of the way he really wants to race bad, and nobody knew them. Well after Will lieing and saying he knew them :rolleyes: I say what the hell...he tells me he has intake, throttle body, headers, and full exhaust and no Nitrous. So we get to the "spot" and from a 45 roll it becomes evident that he is indeed spraying something and launches pretty quick....but I pull him by about 2 cars by 110 ish...Kevin has the video which maybe he will kindly post for me when he gets a chance :D

I was getting bad spark blow out though with the new setup and after that run I was going to run the M3 but it was breaking up too hard...time to regapp the plugs.....most deff. next time :goodjob:

[benwaballs]

nice run. damn nothing ever happens when iam there :mad:

[Nyteryder]

nice run, I was in the black jetta watching from a distance. This same guy wants to run my 240 in his stang for 200.

[Speedm0(\)key]

nice run, I was in the black jetta watching from a distance. This same guy wants to run my 240 in his stang for 200.


the big guy = mustang driver

little skinny annoying fuck = T/A driver

[Speedm0(\)key]

Well first big ups to speedmonkey, kevin, boris and all the others at the Gwinnett meet last night, good to meet some new (good) peeps......

Anyway we are all just hanging out talking when these two kids pull up in a black (maybe 03) trans am with black rims reving it and all the usual. Well the passenger comes right up to me pushing me to run his buddy...at first I'm thinking is this a cop because of the way he really wants to race bad, and nobody knew them. Well after Will lieing and saying he knew them :rolleyes: I say what the hell...he tells me he has intake, throttle body, headers, and full exhaust and no Nitrous. So we get to the "spot" and from a 45 roll it becomes evident that he is indeed spraying something and launches pretty quick....but I pull him by about 2 cars by 110 ish...Kevin has the video which maybe he will kindly post for me when he gets a chance :D

I was getting bad spark blow out though with the new setup and after that run I was going to run the M3 but it was breaking up too hard...time to regapp the plugs.....most deff. next time :goodjob:


i didnt lie MATT!!! i had met them before @ barrett, and they seemed to be ok to run lol.. DAMMIT.. its cause im not white!

fuck you all, have a great day

[Speedm0(\)key]

oh yeah, i have good footage of Andy's torqueless wonder vs. LS1 camaro Z28 (intake/exhaust) on the hwy.

that'll be posted as soon as dan lets me come over to his house, my computers are gay

[crafty]

Trust me... I don't know who this guy is in the Black T/A but, You would not of pulled him if he was spraying... If you think he was and you think your car is fast now.. Then came race me... Also they stopped making Camaros and T/As in 2002...

[SpoolBus]

OK Here's the vid........

SRT4 vs Trans AM (http://www.srt4btu.com/SRT4BTUVSTRANSAM.html)

[SpoolBus]

:goodjob:
Trust me... I don't know who this guy is in the Black T/A but, You would not of pulled him if he was spraying... If you think he was and you think your car is fast now.. Then came race me... Also they stopped making Camaros and T/As in 2002...


Wow...crafty you always jump the gun take it easy killer.......it's all good..we all know your car is fast..but this wasn't your car :goodjob:

[crafty]

I could care less if you beat him or not.. I was just giving my input... No big deal.. And if the t/a was a lt1 car like it said in the video then i don't doubt that you pulled him that much.. It takes a lt1 car with cam, headers, intake, TB, injector.. just to make the same as a ls1..

[Speedm0(\)key]

I could care less if you beat him or not.. I was just giving my input... No big deal.. And if the t/a was a lt1 car like it said in the video then i don't doubt that you pulled him that much.. It takes a lt1 car with cam, headers, intake, TB, injector.. just to make the same as a ls1..


it was LT1 and he indeed was spraying crafty.. so shut your face. i was there.. you werent.. wanna FIGHT!

COME ON WHITEY.. LETS GET IT ON!!!! BABY YEAH!!!.. come on!

on a more serious note. the guy wasnt a bolt on LT1 crafty im being serious. dont get all offended and feel the need to defend the domestic... because in fact.. both cars that ran WERE domestics.

[TIGERJC]

plz use night vision next time lol

[KevinT707]

Vid (clips) are in my thread >> My thread. (http://forums.importatlanta.com/showthread.php?t=58711)

[CHADbee]

good job...wish my SRT would do that type of shit.

[AnclyT]

good job...wish my SRT would do that type of shit. :lmfao:

[crafty]

fuck you spicmonkey... I was just saying that lt1 cars are slow..

[SNapper]

hey man i was the passenger in the miata. that was some good shit and i'm pretty sure that ta had nos.

[2.3 Evo 8]

If this was the same group of guys we met off barrett about a month ago they also said they didn't use nitrous, BUT when he was at Commerce two weeks later his intake piping blew off from a nitrous backfire or puddling. He had to push his car to the side.

Little did we know, that tool box he had in the back had a hidden bottle in it.

The trans am has a fully built motor with bolt ons and probably running nitrous.

[Nyteryder]

If this was the same group of guys we met off barrett about a month ago they also said they didn't use nitrous, BUT when he was at Commerce two weeks later his intake piping blew off from a nitrous backfire or puddling. He had to push his car to the side.

Little did we know, that tool box he had in the back had a hidden bottle in it.

The trans am has a fully built motor with bolt ons and probably running nitrous.

I was there when that happened, now that you mention it, this is the same mustang/driver that wants to run my 240 that he knows nothing about

[CHADbee]

If this was the same group of guys we met off barrett about a month ago they also said they didn't use nitrous, BUT when he was at Commerce two weeks later his intake piping blew off from a nitrous backfire or puddling. He had to push his car to the side.

Little did we know, that tool box he had in the back had a hidden bottle in it.

The trans am has a fully built motor with bolt ons and probably running nitrous.
a trans am with a built motor, bolt ons and spraying nitrous getting his ass handed to him by a neon makes me smile.

[lightspeed]

Ive seen the neon run, and it is fast, but I cant believe that TA had a built motor with spray. I heard he was spraying, which I cant confirm, although I was there at the end. I offered to let him run my 13 sec s10 if he wanted next weekend when its out of the shop, and he declined. He didnt appear confident that his car was all that fast, it just looked like he wanted to race someone. I would expect if he had all those mods that he would have been more cocky about it.

[Member31410]

Not bad for a Neon. http://forums.importatlanta.com/images/smilies/biggrin.gif http://forums.importatlanta.com/images/smilies/goodjob.gif Hurry up and get that W/I worked out. http://forums.importatlanta.com/images/smilies/goodjob.gif

BTW, I met Dan on Friday. Man that IS300 of his is quick. http://forums.importatlanta.com/images/smilies/eek.gif He immediately pulled bus lengths on me on one run. http://forums.importatlanta.com/images/smilies/lmfao.gifHe was already a football field length ahead of me when I finally realized that I was not in HOM. http://forums.importatlanta.com/images/smilies/11doh.gif http://forums.importatlanta.com/images/smilies/owned.gif That was our second run. Our first run was a bit closer. http://forums.importatlanta.com/images/smilies/smile.gif HOM was on that time. http://forums.importatlanta.com/images/smilies/loco.gif http://forums.importatlanta.com/images/smilies/wink.gif

[1000cckiller]

it was LT1 and he indeed was spraying crafty.. so shut your face. i was there.. you werent.. wanna FIGHT!

COME ON WHITEY.. LETS GET IT ON!!!! BABY YEAH!!!.. come on!

on a more serious note. the guy wasnt a bolt on LT1 crafty im being serious. dont get all offended and feel the need to defend the domestic... because in fact.. both cars that ran WERE domestics.Will stfu both domestics, yeah the trans am, You know the srt-4 isnt no domestic, it just as a dodge emblem but a mitsu motor.

[Sartie4]

actually...its not a mitsu motor at all...it has some roots in mexico tho....

[ct9a gsr]

Not bad for a Neon. http://forums.importatlanta.com/images/smilies/biggrin.gif http://forums.importatlanta.com/images/smilies/goodjob.gif Hurry up and get that W/I worked out. http://forums.importatlanta.com/images/smilies/goodjob.gif

BTW, I met Dan on Friday. Man that IS300 of his is quick. http://forums.importatlanta.com/images/smilies/eek.gif He immediately pulled bus lengths on me on one run. http://forums.importatlanta.com/images/smilies/lmfao.gifHe was already a football field length ahead of me when I finally realized that I was not in HOM. http://forums.importatlanta.com/images/smilies/11doh.gif http://forums.importatlanta.com/images/smilies/owned.gif That was our second run. Our first run was a bit closer. http://forums.importatlanta.com/images/smilies/smile.gif HOM was on that time. http://forums.importatlanta.com/images/smilies/loco.gif http://forums.importatlanta.com/images/smilies/wink.gif

Haha, this Ming? If so, you don't have to be all shy 'bout it... you raped Dan in HOM. ^.^

I have the video, just too lazy to host it... perhaps later.

[Speedm0(\)key]

Ive seen the neon run, and it is fast, but I cant believe that TA had a built motor with spray. I heard he was spraying, which I cant confirm, although I was there at the end. I offered to let him run my 13 sec s10 if he wanted next weekend when its out of the shop, and he declined. He didnt appear confident that his car was all that fast, it just looked like he wanted to race someone. I would expect if he had all those mods that he would have been more cocky about it.


he was very cocky before the race. maybe something happened lol?

his buddies are even more cocky.. trust me something is up. or they atleast act like it

[fight club]

paced the race in the miata, and Matt did pull on the car like crazy. and yes the t/a was spraying, how much, who knows?! i wouldnt say it was a built motor tho. if it was, he needs his money back.

[2.3 Evo 8]

paced the race in the miata, and Matt did pull on the car like crazy. and yes the t/a was spraying, how much, who knows?! i wouldnt say it was a built motor tho. if it was, he needs his money back.

It is a built motor because I wanted to race him for $50 when we met at barrett, but he said he was breaking in the newly built motor. He almost raced but decided he didn't want to risk it just yet.

The skinny guy with him built the motor for him. The skinny kid and his father supposedly have fully built drag car that they built together also.

This info was straight from the horses mouth and could be total bullshit.

[fight club]

lol well if it was, like i said, a built t/a spraying should of won, so he should either get his money back or stop b/sin.

[1000cckiller]

actually...its not a mitsu motor at all...it has some roots in mexico tho....actually it is the 2.4 rallart motor reversed. look and take your motor apart and the rallart motor, seen both pulled apart at the same time. mitsu and dodge have a joining plant in mexico.

[SpoolBus]

actually it is the 2.4 rallart motor reversed. look and take your motor apart and the rallart motor, seen both pulled apart at the same time. mitsu and dodge have a joining plant in mexico.


Mexico...so me and Will do have something in common! :lmfao:
2.3 evo your right because the skinny kid said "yeah I would know I built it for him" when I asked him to verify the Nitrous deal....then I said "you built it for him, thought he only had bolt on's?" So now that makes sense because I knew he slipped up.....

[Member31410]

Haha, this Ming? If so, you don't have to be all shy 'bout it... you raped Dan in HOM. ^.^

I have the video, just too lazy to host it... perhaps later.

"Charles is alright..." http://forums.importatlanta.com/images/smilies/loco.gif http://forums.importatlanta.com/images/smilies/biggrin.gif http://forums.importatlanta.com/images/smilies/lmfao.gifLater bro.

[Speedm0(\)key]

Mexico...so me and Will do have something in common! :lmfao:
2.3 evo your right because the skinny kid said "yeah I would know I built it for him" when I asked him to verify the Nitrous deal....then I said "you built it for him, thought he only had bolt on's?" So now that makes sense because I knew he slipped up.....


lol.. wOOooOOO!!!

whos down for a round of dos equis

[unkn0wndj]

Well maybe his cams werent cammin' right and his headers weren't headerin' right or maybe it's just his computer has a virus.. I don't know.. hahah (ricervidonstreetfire)

[fight club]

the little skinny guy has the t/a. the bigger guy drives some crazy ass fox body.

[shortysm22]

"Charles is alright..." http://forums.importatlanta.com/images/smilies/loco.gif http://forums.importatlanta.com/images/smilies/biggrin.gif http://forums.importatlanta.com/images/smilies/lmfao.gifLater bro.

hey Ming, I'm the other one :D , met you the night you met Dan

[Member31410]

hey Ming, I'm the other one :D , met you the night you met Dan

;) :cheers: