FS/TESTING WATERS:2.0l LSVTEC 237whp ALL MOTOR

[Vteckidd]

Plenty of vouches, plenty of dyno runs to back it up, take anyone for a ride to see how fast it really is. need to sell this to move onto my other project, lets just say i am bored with this one, never got to run it at the track, but at this point im ready to move on an build something bigger.
http://i24.photobucket.com/albums/c21/Vteckidd/HPIM2270.jpg
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE3MDYzNDZzNDEzZGZkMzF5NTQx.jpg
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE3MDYzNjZzNDEzZGZkMzF5NTQx.jpg

B18A LS BLOCK
RS MACHINES Benson SLEEVED 84.5mm
CP Pistons 12.2:1
Eagle ROds with big bolts
ACL RACE bearings
New ITR oil Pump, ITR water pump, lower gasket kit
Balanced rotating assembly

This is it, the HIGHEST WHP ALL MOTOR BLOCK IN THE STATE. Professionally assembled an engine dynoed by DFE Enterprises. Motor has 2500 miles on it
$1900 FIRM

Skunk2 Pro3 PROTOTYPE CAMSHAFTS
you will NOT find a set of these anywhere, very hard to buy or get. Best cams on the market
$550 obo PERFECT SHAPE
[I]
GOLD Professionally Coated by TBONE on HT DOHC VALVE COVER
has a nick in it from where my hood rubbed
$75 FIRM
http://i24.photobucket.com/albums/c21/Vteckidd/HPIM2342.jpg
OBD1 Vtec Distributor
$100 FIRM

[93H22ACX]

:eek: why o why

[Vteckidd]

lol, stop playin, you know why

[EmminoDaGreat]

bump

[BTEC]

lol, stop playin, you know why
bc i got plans of calling him out and he dnt want to get his doors blowed off by a turbo b16. LOL!!

[lsvteceg954]

damn bump!!!! good ass prices should sell fast

[Vteckidd]

motor is still in my car if anyone wants to go for a ride to see how it feels to light 3rd gear up

[99SI]

oh lord. here we go. sellout. lol. :D

[BTEC]

motor is still in my car if anyone wants to go for a ride to see how it feels to light 3rd gear up
I can vouche for this build bc i drove it, torque is stupid and it revs quick as hell. its pretty damn sick!! i was definitely impressed. Sholud be pretty fast with drag radials/slicks and somebody that can drive the sumbitch. LOL!!!

[Jdm94Coupe]

motor is still in my car if anyone wants to go for a ride to see how it feels to light 3rd gear up

actually i do......

[BTEC]

actually i do......
$5 bitch!! Gas is expensive these days. LOL!!!

[Jdm94Coupe]

yea i know, it would take me $10 in gas to get there anyway

[Vteckidd]

up

[speedminded]

Can i stop by and :nautjerk: to it before it's gone? Naw, seriously...comes with a 10 year/100,000 mile warranty right? :tongue: Wonder what it would do with ITB's?

[Vteckidd]

we will find out soon. yeah jason, for you, you can come by an go for a ride lol

[Brandon C]

hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm

I might be interested where you at?

[NevrNufTorq]

bump for a quality motor!!!!!!

[1439/2000]

Your sig says 11.7 @ whatever. What car did you run that in?

[Vteckidd]

im in powder springs.

car never ran 11.7, its an inside joke between me an a few friends. read the first post, i said IT NEVER WENT TO THE TRACK.

it WILL run 11s in my chassis hough

[1439/2000]

im in powder springs.

car never ran 11.7, its an inside joke between me an a few friends. read the first post, i said IT NEVER WENT TO THE TRACK.it WILL run 11s in my chassis hough

That's why I asked.

[thinkskater]

bump for you wish i had a lsv in any my honda's

[Vteckidd]

up

[DC2NR]

wouldn't be planning to part out on the tranny would you?

[Vteckidd]

nope, not unless i decide to go K series, not sure yet

[Hondasi]

ill give you 1700 for the head, itb and im. just an offer let me know.

[Vteckidd]

$1700 an you can have the head an intake manifold, not the throttle body, im not losing that much money sorry. $1800 for all three an you got a deal

[blue_5g_zc]

thats too high of a compression for a daily driver right? i think premium gases threshold stops @ like 11:1 or so. plz correct me if im wrong

[Vteckidd]

nope this runs on PUMP gas 93 octane, never ran race gas through it. the cams are so big the static comp is actaully not that bad

[Vteckidd]

up

[jackdaripper]

I know how ya feel, bump for the sale, next car I will have out will run single digit numbers.

[Vteckidd]

yeah we get bored kinda fast dont we lol

[jackdaripper]

yeah but its fun building them.

[Vteckidd]

head sold to a "private buyer"

[Z33_kid]

if i only had a damn shell
damn itt bump

[Vteckidd]

UP

[Vteckidd]

up

[Vteckidd]

do what you want, an let me know

[BABY J]

thats too high of a compression for a daily driver right? i think premium gases threshold stops @ like 11:1 or so. plz correct me if im wrong

12:5:1 is about the limits of pump gas (generally speaking)

PS: And Mike, you mean most powerful B series N/A block in the state. :) Fuckin showoff. LOL

[Vteckidd]

This is it, the HIGHEST WHP ALL MOTOR BLOCK IN THE STATE

thats a correct statement, its the highest whp ALL MOTOR block in the state. the highest HONDA ALL MOTOR block belongs to streetstuff, he had a F22 that made over 280whp

[KevinT707]

How reliable do you think the OBD1 dizzy off your motor will be for me honestly Mike.

[PawnShopCEO]

How reliable do you think the OBD1 dizzy off your motor will be for me honestly Mike.


do you think mike is a psychic? c'mon kevin... he knows it works NOW... how can he predict the future... he wouldnt sell you a POS that he has been having problems with and represent it as in perfect condition.

[BTEC]

How reliable do you think the OBD1 dizzy off your motor will be for me honestly Mike.
hurry up a buy!!!

[BABY J]

Mike IS psychic... shows what you know!!! *crosses arms** hmph!!!! He told me MS would be closed today and by golly he's right!! Be VEEEEWWWWWWY careful around this guy.

PS: Mike, check ya PMs. (as in private messages, not pre-menstrual syndrome)

[KevinT707]

do you think mike is a psychic? c'mon kevin... he knows it works NOW... how can he predict the future... he wouldnt sell you a POS that he has been having problems with and represent it as in perfect condition.
Yea you right, and your car is still begging for some paint ;) .

[Vteckidd]

do you think mike is a psychic? c'mon kevin... he knows it works NOW... how can he predict the future... he wouldnt sell you a POS that he has been having problems with and represent it as in perfect condition.
this man speaks the truth.

how do i know, i know it has run 176 times to 9000rpms, an it worked the min i pulled it off the car.

thanks, come again

[Vteckidd]

Pics of the bottom end:
http://i24.photobucket.com/albums/c21/Vteckidd/Picture140.jpg
http://i24.photobucket.com/albums/c21/Vteckidd/Picture141.jpg
http://i24.photobucket.com/albums/c21/Vteckidd/Picture142.jpg

Look at the PERFECT MOTOR! see the clean spots around the edge of the piston, that means it was getting a very clean an efficient burn, motor is good to go

[BABY J]

showoff

[nDrew]

Nice.

[BABY J]

OEM ignition Mike?

[Vteckidd]

yup, stock honda ignitions are good for 250whp NA an 400whp turbo

[BABY J]

yup, stock honda ignitions are good for 250whp NA an 400whp turbo

I can tell by looking at the bottom end (since you say it has less than 40k(??)). OEM ignition is good, no doubt. But you would have a cleaner-burning bottom-end (if it's less than 40k) if you went aftermarket. Just a thought. Still hott shit though.

[PawnShopCEO]

Kevin, when you get a REAL motor holla at your boy

[Vteckidd]

I can tell by looking at the bottom end (since you say it has less than 40k(??)). OEM ignition is good, no doubt. But you would have a cleaner-burning bottom-end (if it's less than 40k) if you went aftermarket. Just a thought. Still hott shit though.
motor has MAYBE 2500 miles on it

[KevinT707]

Kevin, when you get a REAL motor holla at your boy
kekeke .. your so cute .. I'll holla at you soon homie don't worry, & you better have your car painted by then :rolleyes:

[Vteckidd]

up

[Vteckidd]

you two go bitch fight somewhere else keep it out of my thread

[Vteckidd]

up

[Vteckidd]

COMPLETE BLOCK $2200 picked up

[iloveboost]

Geez. You're giving that thing away at that price. I paid $3,000+ for my block and that was a deal.

[Vteckidd]

up

[Vteckidd]

up

[tibxgtv6]

ehh im not to umm good with honda engines and stuff so could you tell me what cars this would fit into? and why are you selling it

[Vteckidd]

if you dont have a clue, then this motor isnt for you , sorry

[iloveboost]

This motor is not for the timid.

[LS2ner]

Pffft.. that motor is weak. Im waiting for the new one =P

[Vteckidd]

numhjftryt

[Vteckidd]

n,mn,

[Vteckidd]

$2200 for the block, wont find a better deal

[BABY J]

I just did a "rough" cut on pricing from the things i know u have in your motor. I have a buy-in w/ most comapnies and I used reseller or WD pricing. You are taking a hit w/ this sell... big time. Wow. What a great deal. Bump

[Vteckidd]

yeah i know, it would prob cost someone $3000+

sleeved block with crank $1200
machine work $600 (to duplicate the work i had done)
ACL Race Bearings $100
Rods $300
CP Pistons $475
Porfessional assembly by DFE ENterprises $950
Engine Dyno $300 a day

[Vteckidd]

no one wants a KAAZ lsd

[PawnShopCEO]

$2200 for the block, wont find a better deal


sure you will... build a h22 :)

[Vteckidd]

my LSVTEC>your H22
try again

[thinkskater]

hell yea fuck h .... b-series frankenstein !

[Vteckidd]

:cool:

[thinkskater]

bump for the badass shit , i wanted the whole damn car !

[Vteckidd]

up

[PawnShopCEO]

bump for a motor that beat my 3k$ h22 from 8500-9000 rpms.

[LS2ner]

ur 3k h22 that comes 2.2 liters stock. .2 more liters than his. Oh and one that wont stand the abuse his will. free bump too

[PawnShopCEO]

80 + turbo dave dyno pulls beg to differ... bump

[Vteckidd]

175+ 9500rpms dyno pulls > 80 pulls.

remember i made more power with a smaller motor too, an my powerband was better than 500 rpms lol

it was more like 1000rpms

[Vteckidd]

BUMP

[BABY J]

bump for a gr8 motor

[Vteckidd]

up

[Vteckidd]

up

[BABY J]

Quit pretending like yall don't want my man's shit. LOL. :) All of yall who are sitting on $800 or $900 and tryna find a stock B/H, step the game up and go ahead and get one that's a proven runner. You pay more now, but swapping in a stock or "bolt-on" block you are still gonna pay MORE in the end to get faster. The key here is that machine work has already been done... that's the hardest part, you won't have to worry about your car being down. Bump for Mike.

[Vteckidd]

BUY MY BLOCK!

[BABY J]

Yeah, what he said.

[Vteckidd]

up

[puregroove]

bump for the s1ckness::: :goodjob:

[Vteckidd]

I WILL NOW PART OUT THE BLOCK:
1)SLEEVED RS MACHINES BLOCK 84.5mm Step decked, Precision honed $1100 FIRM with oil pan
2) LS Crank, balanced, micropolished by DFE Enterprises $150 FIRM
3) Eagle LS rods USED 2500miles, with ACL Race Bearings $350 FIRM
4) CP 12.2:1 Pistons $350 with rings, PERFECT shape

[BABY J]

You shoulda waited a bit more man, but I feel ya... gotta move it. At least this way no1 has to live with "FUCK YOU and the fact that you beat me --> it wasn't YOUR motor NEway, it was Mikes." LOL

[Vteckidd]

gotta finish the new project, need more money

[BABY J]

BUMP IT BITCHES.... Mike needs to fund his new Nissan build... BUY HIS SHIT!!!

[Vteckidd]

up

[Vteckidd]

up

[thinkskater]

so im guessin the block is tore apart ?

[Vteckidd]

nope, i wont tear it down unless someone offers to buy something still together.

ill take $1900 now for the COMPLETE BLOCK

[BABY J]

WTF are you doing man!!!! Do not just GIVE it away!! Ignore him... he is sleepy. $2200!! Ever heard the term BACKUP motor??

[Vteckidd]

it wont be a backup motor for what i got coming next :)

[BABY J]

Yeah I know... already heard about your new Prelude... you will like the interior better than the EF anyway ;) At the end of the day the Prelude is a good choice... you spend more time DRIVING than racing, so ya may as well be comfortable. Can't wait to see it when you get it rolling

[thinkskater]

kinda funny cuz i am sleepy lol

[Vteckidd]

up

[thinkskater]

bump for a badass shortblock

[Vteckidd]

up

[Vteckidd]

:goodjob:

[Vteckidd]

BLOCK IS SOLD

[iloveboost]

12.2:1 turbo LS!

Call me, please. =)