Fs: fully built b16 head

[Shaun]

this shit is SOLD!

[LQQKITZME]

have paper work on it??

[Shaun]

no paper work... the head is stamped JG , and I have people who can vouch for this head

[sirhatch1030]

shoe pics of the port work

[Shaun]

will do

[Shaun]

good deal here

[sirhatch1030]

not with pics of the work and proof.

[Shaun]

^^ huh?

[95 Integra]

His point is that you cant see anything but some Ti retainers and an intake manifold. Show pictures of the P&P work and of the JG stamps.

[Shaun]

oh ok.. soon i will get some pics

[JDMBeau]

trade head for a h22 swap?

[Shaun]

hmm.. how many miles?? how can you vouch that it runs?

[JDMBeau]

it has a spun bearing. but i will throw in the new bearings. the mtoor has like right at 100k long block. other than that never had any problems out of a 97 prelude.

[Shaun]

sorry cant do it...

[CRX_MEX]

will you part out the intake manifold?

[Shaun]

nope not at the moment

[Shaun]

pm's retunred

[Shaun]

upppppppppp

[Shaun]

up

[Shaun]

up

[Hondasi]

~bump

[SimpleyStock]

good deal free bump......

[Shaun]

thanks

[Shaun]

upp

[allmotoronly]

head milled .25 inches or .25 MM... because .25 inches is a quarter or an inch, and if you milled it that much, the compression ratio would be rediculously high, like 25:1. AND the valves would hit the piston... i think you mean .025 (twenty five thousandths of an inch)

[Shaun]

yeah .025 what he said

[Shaun]

upppp

[bigasian]

willing to separate? if so how much for just the head?

[dr_dave]

bump for badass head.

[Shaun]

hmm make me an offer on just the head

[bigasian]

$800 for the head without the distributor?

[Shaun]

pm sent

[nitrousfed]

:ttiwwp: of thepnp and jg stamp

[Shaun]

soon ;)

[Shaun]

upp

[Shaun]

up pics soon

[WWJDrift]

I've got a sickass alienware computer that i'll trade you for it, just got it like two months ago :rly:

[Shaun]

pm's returned

[Shaun]

here are the pics... sorry for the delay

http://www.superhonda.com/photopost/data/513/Picture_001.jpg

http://www.superhonda.com/photopost/data/513/Picture_0021.jpg

http://www.superhonda.com/photopost/data/513/Picture_0032.jpg

[Shaun]

pics up where yall at

[Shaun]

up

[SPOOLIN]

still dont see pics of port work

[Shaun]

its stamped JG.. the head has been used, in order for you to see the port work i would have to take the intake mani off and then clean up the head.. so you could see it.. its stamped JG

[Shaun]

upp

[InitialDSR]

I am a JG engine distributor...It would be wise to take pics of the ports and combustion chamber and to list the kind of works on it. First off, what stg. is it; street/strip, redline series, pro series, pro series Gen.2? If you dont know than I would be more than happy to find out what stg. and whats done to it if u give me the serial # thats on the head.

[BABY J]

^^ good stuff. 1 call to JG w/ that number should do the trick. Just so you know though, w/out the paperwork that would have came back w/ your head, your street value for this head is LESS than the $800 you were offered. Not tryna flame ya, just letting you know.

[Shaun]

I am a JG engine distributor...It would be wise to take pics of the ports and combustion chamber and to list the kind of works on it. First off, what stg. is it; street/strip, redline series, pro series, pro series Gen.2? If you dont know than I would be more than happy to find out what stg. and whats done to it if u give me the serial # thats on the head.

sounds good.. ill hit you up when i get from out of town, is it possible to get paper work from you too? also where is the serial number on the head located

[Shaun]

upp

[Shaun]

uppp

[InitialDSR]

The serial number should be located around where u put the DIzzy on. Yes it is possible for me to get the paper work on it. It will include all the info pertaining to your JG head.

[lsxtreme]

so whats the dealeo? JG or NO JG??

[Shaun]

its JG ! the stamp is in the pics

[BABY J]

It may be JG, but you can eBay "S2" heads and they are knockoffs, and Mugen valve covers, etc. Before soem1 drops what you want for this head I am sure you can understand them wanting some documentation from JG, that's all.

[InitialDSR]

whats the serial number Shaun? From the look of the pics, it looks like a JG head. Are you gonna send me the serial number and post up some more pics of the port and polish?

[Shaun]

is the serial number the vin number?? im going to send it but i just dont see anything around the dizzy area

[Shaun]

upp

[nitrousfed]

upp..

[Shaun]

umm ok uppp

[InitialDSR]

NO the serial number of the "JG Head" is not the vin number. Ummm i believe they do not engrave vin numbers on Vtec heads. That serial number should be around where u bolt the distributor at; where the end of the intake cam is.

[Soloboy]

Do you have papers of it done???!

[Shaun]

NO the serial number of the "JG Head" is not the vin number. Ummm i believe they do not engrave vin numbers on Vtec heads. That serial number should be around where u bolt the distributor at; where the end of the intake cam is.

how many numbers is it and what other places do they stamp them

soloboy im trying to get some paper work now

[Soloboy]

BUMP for an Interesting Head.. I want it, but budget isnt letting me get it.. Bump for a built head..! Just needing to know if thats what your asking..! because VtecKidd head was more built and he asked less than urs..

[Shaun]

if you want it with comp stage 1 cams... i will sell for 1500 $ , if you want it now i will sell for 1400 obo

[IntegraXTR]

$1400 sounds like a good deal but its kinda hard to sell it for that without any papers.

[BABY J]

http://jgenginedynamics.com/Cylinder%20heads%20main.html

[Shaun]

i am aware of the paper work .. and i am working on it , thanks guys

[Shaun]

this shit is sold!