Log in

View Full Version : FS - Audio crap



4bangin
04-18-2006, 02:53 PM
Brand new Rockford Fosgate amp model P3001. Asking $130
Brand new Rockford Fosgate 10" p3 subwoofer. Asking $120
Used Cadence Beast 12" sub. $75
Brand new Rockford Fosgate 8" P2 subwoofer. Asking $40


I can supply pics of anything

justwongit
04-18-2006, 05:55 PM
pics?

MongolPup
04-18-2006, 05:57 PM
Can I get power handling and specs on the P2, as well as pictures.

Hulud
04-19-2006, 01:55 AM
hey chris imma gonna call you tomorrow about the sub and amp, cause i need a better one

YokotaS13
04-19-2006, 10:05 AM
will yuo ship the 8 to japan?

4bangin
04-19-2006, 01:30 PM
justwongit - what did you need pics of?

i will get you pics and specs of the p2 shortly. it's in my car and it is kinda hailing right now.

i will ship to japan, you pay shipping of course.

thats cool brian, just give me a call.

justwongit
04-19-2006, 03:32 PM
pics of all

BufordŽ
04-19-2006, 05:18 PM
Pics of the amp, please. Oh, and is it 300 watts to 1 channel?

4bangin
04-19-2006, 10:29 PM
http://img.photobucket.com/albums/v441/chrisallen/Dsc03961.jpg

bad pics, but ya get the idea. the p2 8" sub is at my friends and i can't get it back until tomorrow.

from fosgates sites..
amp
Number of Channels 1
Rated Power 150 W x 1 @ 4 Ohms RMS
300 W x 1 @ 2 Ohms RMS
Total Power 300 Watts
Bridgeable No
Crossover Controls High-Pass (HP): 40-400Hz 12dB/octave Butterworth
Low-Pass (LP): 40-400Hz 12dB/octave Butterworth
Tone Controls Bass: 0dB to +18dB @ 45Hz
Signal Input Low level: 1 RCA pair
Signal Output Low level: 1 RCA pair
Power Input Connector Block
Power Wire Gauge 4 AWG
Speaker Output Connector Screw terminal barrier strip
Speaker Wire Gauge 8 AWG to 18 AWG
Heat Sink Type Cast aluminum
Cooling Convection
Remote Controls Punch Bass EQ (included with cable)
Visual Indicators Power On
Signal Level
Thermal Status
Speaker protection
Circuit Topology Class Class-bd
Frequency Response 20Hz to 20kHz +/- 0.5 dB
Dimensions 2.4 x 11 x 11.7 (in)
6.1 x 27.9 x 29.7 (cm)
Weight 11.5 Lbs.
(5.2 Kg.)


10" p3
Size 10"
Impedance 2-Ohm x 2
Power Handling 400 RMS
800 Peak
Motor Size 77 oz. double stacked
Voice Coil Diameter 2.5" aluminum
Speaker Connector Dual 8 AWG compression
Mounting Depth 5.9375"
Rec. Sealed Enclosure 0.65 cu. ft.
18.4 liters
Rec. Vented Enclosure 1.25 cu. ft.
35.4 liters
Tuning Frequency (vented) 40 Hz
Weight 19.2 Lbs.
(8.7 Kg.)


8" p2
Size 8"
Impedance 4-Ohm
Power Handling 200 RMS
400 Peak
Motor Size 30 oz. double stacked
Voice Coil Diameter 2" aluminum
Speaker Connector Dual 8 AWG compression
Mounting Depth 4.0625"
Rec. Sealed Enclosure 0.25 cu. ft.
7.08 liters
Rec. Vented Enclosure 0.65 cu. ft.
18.4 liters
Tuning Frequency (vented) 42 Hz
Weight 8.25 Lbs.
(3.7 Kg.)

jdm7thgen
04-20-2006, 10:19 PM
i will take the 8 p2 pm me and clear ur pm box its full. were u located?

BLk92DA
04-21-2006, 08:27 AM
cut a deal on the 8" p2 and amp? :goodjob:

4bangin
04-21-2006, 06:38 PM
located in cartersville. my pms are clear.


if the other deal falls through i would knock some off if you bought both the p2 and amp.

4bangin
05-11-2006, 10:56 AM
Everything still available :/

4bangin
05-15-2006, 09:06 AM
ttt

4bangin
05-18-2006, 12:05 PM
up one more time

Soloboy
06-16-2006, 05:49 AM
Check PM!

YokotaS13
06-16-2006, 05:56 AM
ill give you 50 shipped WITH insurance to me

93626

4bangin
07-23-2006, 09:47 PM
still have this stuff

aaronfelipe
07-23-2006, 10:19 PM
Please post pictures of ALL your $50+ items on the first post. Thank you and good luck with your sale.