PDA

View Full Version : got a question 1990 eclipse gs trubo



PMAC
03-31-2006, 11:18 AM
I found a 90 eclipse gs turbo that the guy blew the motor in, he says the motor has no compression and i was wondering if someone knows about how much it would cost to rebuild the existing motor or to buy another motor to drop in its place.

MirageMan
04-01-2006, 09:13 PM
used motor 1300-1600

2.0civic
04-01-2006, 10:50 PM
or you can buy my entire car for that much and its a 1990 as well

Five*Star*
04-07-2006, 01:32 AM
I just did a 6-bolt shortblock with h-beam rods, forged pistons, machine work, and installed for about $3200 including labor.

If your head is toast or the valves are bent then it would be extra.

With a used engine it would be cheaper, but it would be a little iffy going with an old engine without at least freshening it up with bearings, rings and a new oil pump.


You really need to figure out if the timing jumped or if the motor is just blown.

If the timing jumped then you might get away with a freshen up and new valves. If the motor spun a bearing then a new crank would be in order if you ever plan on boosting hard.

TsiGuy
05-28-2006, 01:05 AM
how much would that setup be with a head five star?