PDA

View Full Version : AutoFab ///Motorsports Dyno Day Hosted by AAP


Autofab
03-27-2006, 09:18 AM
When: Saturday April 15th 9am

Where: AutoFab ///Motorsports & AAP

Registration and Payment Opens : 8am



Here’s the deal. 3 Power Pulls for $50.00 US Dollars. We open the registration at 8am. You will pay your money and get to select your dyno slot. First car will be strapped and ready to do its pulls at 9am.



If you want early slots then pre-registration is available via Credit Card, Check or Cash that you can drop off and reserve a time. AAP has said it should be about 15 minutes per car for 3 pulls.



Cliff Notes – Come at 8am and pay your money and get a slot. It is First Come First Serve setup.



See you Saturday morning



-AutoFab Crew
ProjectWidow
03-27-2006, 09:18 AM
Sweet, I'll be there.
rolling_trip
03-27-2006, 09:20 AM
AWD dyno?
Autofab
03-27-2006, 09:22 AM
AWD dyno?

No im sorry. AAP specializes in Supras so no need for that :)
ProjectWidow
03-27-2006, 09:23 AM
AWD dyno?
Nope, just a regular Dynojet rwd or fwd dyno.
DinanM3atl
03-27-2006, 09:46 AM
i'll be there putting down mad power in the ///M ;)

roflmao
rollininstyle2004
03-27-2006, 05:53 PM
I might be able to make it. BTW i posted in your thread on Passatworld with a location. It might be good to include that on the non local forums ;)
Decker1.8t
03-27-2006, 06:52 PM
Someone wanna spot me a new clutch and 50 bux? Regardless, I'm there.
DinanM3atl
03-27-2006, 07:35 PM
I might be able to make it. BTW i posted in your thread on Passatworld with a location. It might be good to include that on the non local forums ;)

i know i messed up!!!
shortysm22
03-27-2006, 09:29 PM
is a tailpipe sniffer avaliable? If yes, how much extra, I am interested, thanks.
DinanM3atl
03-27-2006, 09:30 PM
is a tailpipe sniffer avaliable? If yes, how much extra, I am interested, thanks.

it is but not really all that useful, you really need a welded in O2 bung... before the cats...
shortysm22
03-27-2006, 09:39 PM
it is but not really all that useful, you really need a welded in O2 bung... before the cats...

a very vague and general idea would be a lot better than nothing IMO
DOHC ACCLUDE
03-27-2006, 09:46 PM
post address for exact directions
ProjectWidow
03-27-2006, 09:48 PM
post address for exact directions
3651A McGinnis Park Drive
Suwanee, Ga 30024
The BUCKY
03-27-2006, 10:05 PM
very interested
DinanM3atl
03-27-2006, 11:33 PM
3651A McGinnis Park Drive
Suwanee, Ga 30024

that is for AAP :)
autofab is just behind it :)
Autofab
04-04-2006, 03:42 PM
bump
RandomGuy
04-04-2006, 08:37 PM
WTF... u dont take canadian dollars? What kind of legit establishment doesnt take canadian currency.
Five*Star*
04-08-2006, 02:55 AM
BUMP for dyno day at Northside's AUTOFab Motorsports!



Keeping it coming your way Thomas!! ;)


Michael
4dmin
04-08-2006, 04:19 PM
yo i'll make it out :goodjob:
DinanM3atl
04-11-2006, 12:09 AM
yo i'll make it out :goodjob:

sweet paul!!!
DinanM3atl
04-11-2006, 12:10 AM
WTF... u dont take canadian dollars? What kind of legit establishment doesnt take canadian currency.

Im sorry, its just with current exchange rates we can't do it right now. The euro on the other hand we may be able to work out a deal to accept the euro :)
fight club
04-11-2006, 12:13 AM
hahaha. if i didnt know for a fact i would be shamed by my dyno id consider running the miata. might stop by to see whos putting what down tho, if thats acceptable?
Anthology
04-11-2006, 02:13 AM
Yeah I might stop by as well... right now im just runnin the cougar w/exhaust/CAI so no real point in payin for someone to tell me how slow my car is... but i may come to meet some people
DinanM3atl
04-11-2006, 09:14 AM
come to watch thats fine!!!
Five*Star*
04-12-2006, 02:09 AM
If you guys are interested in welding in bungs on Fri. Then I may decide to come by and rent out my Innovate Wideband O2 set-up for the dyno guys that REALLY want an accurate reading. As long as I could mount it before the car is ready to pull onto the dyno, then it wouldn't really be a problem.


I guess I will give Thomas a ring about it tomorrow.
DinanM3atl
04-12-2006, 03:28 PM
If you guys are interested in welding in bungs on Fri. Then I may decide to come by and rent out my Innovate Wideband O2 set-up for the dyno guys that REALLY want an accurate reading. As long as I could mount it before the car is ready to pull onto the dyno, then it wouldn't really be a problem.


I guess I will give Thomas a ring about it tomorrow.

or i think if you pay AAP they can put one on for you. Don't know what they will be charging though
The Ren
04-13-2006, 08:05 AM
I may stop by after work since its not far from me... but that wont be till after 4. Gene Ill hit you up on the cell and see whats up.
ProjectWidow
04-13-2006, 10:49 AM
I may stop by after work since its not far from me... but that wont be till after 4. Gene Ill hit you up on the cell and see whats up.
Sounds like a plan.