Mach1girl

[mach1girl]

Hi, I am noob to IA but not new to car forums. I have a 03 Black Mach 1 Mustang, but bottom line I love cars, imports or domestics. I just started racing last year and plan on racing turestreet at Fun Ford in Atlanta this April. In the 1/8 i ran a 8.03 at 89mph with 1.76 60ft. I ran Truestreet in Bristol on a 1/4m track, 13.08 @ 113 on street radials so my 60ft sucked! Still workin on getting the times down, i just need more seat time. Here is the mods and picture of my car.
Matrix Lowering Springs,
BBK Long Tube Headers,
Custom X-Pipe,
2 Chamber Flowmaster Exhaust,
410 Gear,
Ford Racing Cobra Shift Knob,
Steeda Tri Air Shifter,
Vortech Polished SQ Supercharger,
Vortech Shaker System,
Vortech Bypass Valve
Paxton Air to Air After Cooler,
Lightning Mas Air Sensor 90mm,
Anderson Powerpipe,
SVT Hi-Volume Fuel Pump,
42lb Injectors,
Auto Meter Fuel & Boost Gauge,
Ford Racing Coil Covers,
Sub-Frame Connectors,
Steeda Upper Adjustable Control Arms,
Steeda Lower Control Arms,
Steeda 4 Bolt Caster/Camber Plates,
Strange 31-spline Axel,
Eaton Differential,
Strange Drilled/slotted brakes
17x 8 Charcoal Bullets,
17x10.5 Charcoal Bullets,
Nitto 275/45/17, Goodyear 315/35/17(waiting on the tread to wear down to replace the goodyear with Nittos')

[The Yousef]

nice car!

welcome to IA

[Joann]

clean ass car, as I said before :)

[TwinyTwin]

Good looking car and welcome. Nice to see another domestic on the site, espically a female driver.

[Mitsubishi1]

sick car... welcome

[ct9a gsr]

There's plenty of domestic car drivers on this forum... granted some of them are down-right annoying... I'm sure you're different... or at least hope so.

If you're in woodstock, and if you're ever bored, come check out some of the Barrett meets on weekends... when we're not hassled by cops, it can be interesting... usually lots of domestics and imports...

[efman]

welcome

[Nitro]

There's plenty of domestic car drivers on this forum... granted some of them are down-right annoying... I'm sure you're different... or at least hope so.

If you're in woodstock, and if you're ever bored, come check out some of the Barrett meets on weekends... when we're not hassled by cops, it can be interesting... usually lots of domestics and imports...

:stupid: welcome

[#1Beaver]

WeLcOmE

[mach1girl]

There's plenty of domestic car drivers on this forum... granted some of them are down-right annoying... I'm sure you're different... or at least hope so.

If you're in woodstock, and if you're ever bored, come check out some of the Barrett meets on weekends... when we're not hassled by cops, it can be interesting... usually lots of domestics and imports...

I agree there are some that are annoying, I think that happens no matter if it is domestic or import. But it is just part of it. I personally don't criticize ones pride & joy no matter what kind of car it is. As to Barrett.... i have been pulled over so many times over there i look for every back way to avoid it.... I won't mention how many tickets i have had since i was 16(mostly speeding), luckily i am in my 30's so they are spread out over enough time i still have my license and a lawyer. :D Where do you all go on Barrett. I have seen a bunch hangin out over near Barnicals....

[BlueHatch]

another black mustang ! thats what im talkin about. im after the same wheels as you why dont i ever see the deep dish in the front? do they not fit or is just personal preference?

[mach1girl]

another black mustang ! thats what im talkin about. im after the same wheels as you why dont i ever see the deep dish in the front? do they not fit or is just personal preference?

I don't think they make deep dish in 17x9's but I could be wrong. i was pushing it by putting the 17x9 and 275's on the front.

[Curbow_USMC]

WELCOME!!

[fawk_you]

Welcome to the forum. Like I said before thanks. I look foward to talkin with you some more. :)

[ionblu_max96]

very nice....welcome to IA

[A.P. Photography]

I agree there are some that are annoying, I think that happens no matter if it is domestic or import. But it is just part of it. I personally don't criticize ones pride & joy no matter what kind of car it is. As to Barrett.... i have been pulled over so many times over there i look for every back way to avoid it.... I won't mention how many tickets i have had since i was 16(mostly speeding), luckily i am in my 30's so they are spread out over enough time i still have my license and a lawyer. :D Where do you all go on Barrett. I have seen a bunch hangin out over near Barnicals....


:lmao: Girl if you only knew. Welcome

[PhAtBoYMr2]

once again, welcome to to IA enjoy your stay!

[Ran]

Welcome aboard. :)

[Tech_Queen]

welcome to IA, nice car

[buddha@TeamFX]

Welcome!!!..Nice car...Aren't you a member of Streetcarforums.com as well!?

[mach1girl]

Welcome!!!..Nice car...Aren't you a member of Streetcarforums.com as well!?

Thank you and. Yes i am on SCF....seems as though they are having techincal difficulties.

[chameleon30038]

props!! welcome!

[Sport1.3]

I-I4wtI\I355!!11

[imbosile]

nice car

[mach1girl]

nice car

Thank you!

[buddha@TeamFX]

Yea I know...it sucks that they've been down...i've been on sleepertbird's forum and bugmans....any word on when it will be back up!?

[babygurl]

Hi, I am noob to IA but not new to car forums. I have a 03 Black Mach 1 Mustang, but bottom line I love cars, imports or domestics. I just started racing last year and plan on racing turestreet at Fun Ford in Atlanta this April. In the 1/8 i ran a 8.03 at 89mph with 1.76 60ft. I ran Truestreet in Bristol on a 1/4m track, 13.08 @ 113 on street radials so my 60ft sucked! Still workin on getting the times down, i just need more seat time. Here is the mods and picture of my car.
Matrix Lowering Springs,
BBK Long Tube Headers,
Custom X-Pipe,
2 Chamber Flowmaster Exhaust,
410 Gear,
Ford Racing Cobra Shift Knob,
Steeda Tri Air Shifter,
Vortech Polished SQ Supercharger,
Vortech Shaker System,
Vortech Bypass Valve
Paxton Air to Air After Cooler,
Lightning Mas Air Sensor 90mm,
Anderson Powerpipe,
SVT Hi-Volume Fuel Pump,
42lb Injectors,
Auto Meter Fuel & Boost Gauge,
Ford Racing Coil Covers,
Sub-Frame Connectors,
Steeda Upper Adjustable Control Arms,
Steeda Lower Control Arms,
Steeda 4 Bolt Caster/Camber Plates,
Strange 31-spline Axel,
Eaton Differential,
Strange Drilled/slotted brakes
17x 8 Charcoal Bullets,
17x10.5 Charcoal Bullets,
Nitto 275/45/17, Goodyear 315/35/17(waiting on the tread to wear down to replace the goodyear with Nittos')


i am in love with your car :)

very nice!

[buddha@TeamFX]

^^ Your in love with every car!...

[mach1girl]

i am in love with your car :)

very nice!

Thank you.... :D
I am in love with it too. I call it my man, doesn't cheat, give me a hard time, i am the only women in his life, never complains, leaves the house only when i do, takes me to dinner, a little high maintenance & expensive but it is all worth cause he appreciates the attention I give him;)

[A.P. Photography]

^^ Your in love with every car!...
Speaking of in love with a car, WHEN IS THE CAMARO GOING TO BE DONE!!!!!!

[babygurl]

^^ Your in love with every car!...


you of all people should know the Mustang is my favorite car!

[buddha@TeamFX]

I don't you didn't seem to like mine to much...maybe thats just cause it was always sideways or maybe it was the time i ran the stop sign lol!!...Matt...the camaro is in the paint booth as we speak..she's all taped up and cleaned...prolly shootin it one night this week...don't worry buddy I'm on top of my game again finally and things are lookin up!

[A.P. Photography]

Bout time. Can't wait to see her done.

[mach1girl]

Yea I know...it sucks that they've been down...i've been on sleepertbird's forum and bugmans....any word on when it will be back up!?

No not a word. i keep checking but still getting errors. what is Bugmans website?

[mach1girl]

I don't you didn't seem to like mine to much...maybe thats just cause it was always sideways or maybe it was the time i ran the stop sign lol!!...Matt...the camaro is in the paint booth as we speak..she's all taped up and cleaned...prolly shootin it one night this week...don't worry buddy I'm on top of my game again finally and things are lookin up!

What year camero? Are you going to Fun Ford?

[buddha@TeamFX]

bugmans site is corruptedstangs.net ...I doubt I'll be at fun ford thats usually the weekend of rod run in pigeon forge and I'm always there...yea keep your ear open and let me know...my camaro is a 1968 RS the one in my sig....I as well have a 1970 Chevelle that I'm starting on as well..Love your car!

[GsrTurbo320]

daaayyummm, welcome

[mach1girl]

bugmans site is corruptedstangs.net ...I doubt I'll be at fun ford thats usually the weekend of rod run in pigeon forge and I'm always there...yea keep your ear open and let me know...my camaro is a 1968 RS the one in my sig....I as well have a 1970 Chevelle that I'm starting on as well..Love your car!

Old hot rods are just cool! i really like the older Camero's... There was one up at Dallas that i use to love to watch run. Chevelle's are nice too.



I am struggling now with wheels and tires on my car. I have the wheels picked out it is just the tires. It has to be FAT on the back. I amd getting 18x9's with 275 on the front and 18x10's on the back and would like to put 305 nitto's on the back. but i just found out the 305 nitto's are hard to come by...instant headache! AHHHH! And trying to get this all done before FFW.

[crafty]

Nice to see another domestic on the site.. Good to meet you:goodjob:

[crafty]

I amd getting 18x9's with 275 on the front and 18x10's on the back and would like to put 305 nitto's on the back. but i just found out the 305 nitto's are hard to come by...instant headache! AHHHH! And trying to get this all done before FFW.

305's are easy to get, I can get them shipped in 1-2 days.. pm me and i'll see what i can do for you..

[crafty]

[QUOTE=buddha@TeamFX]my camaro is a 1968 RS the one in my sig....QUOTE]

Nice car man, I had a 69' true DZ302 camaro ...

[mach1girl]

305's are easy to get, I can get them shipped in 1-2 days.. pm me and i'll see what i can do for you..

PM sent

[buddha@TeamFX]

I would love to have dz 302 car...My uncle had one then traded it for a ss396 66 Chevelle

[ia13]

Old hot rods are just cool! i really like the older Camero's... There was one up at Dallas that i use to love to watch run. Chevelle's are nice too.



I am struggling now with wheels and tires on my car. I have the wheels picked out it is just the tires. It has to be FAT on the back. I amd getting 18x9's with 275 on the front and 18x10's on the back and would like to put 305 nitto's on the back. but i just found out the 305 nitto's are hard to come by...instant headache! AHHHH! And trying to get this all done before FFW.


you should put saleen rims on it. :goodjob:

[mach1girl]

you should put saleen rims on it. :goodjob:
I like the Saleen wheels.... i like FR500's also. but i got a killer deal on these wheels that i couldn't pass up not i just need to go get the tires.

[Tracy]

This is very strange! 3 pages and not one regquest for a pic of her yet. Am I on the right site????

Welcome! I love to see all the women in the scene now a days. Good luck with your car and the racing. Check out www.fem-tech.com if you get a chance. The girls are very nice and knowledgeable over there.

Now let's race!!!! JK :D Hope to see you around sometime.

[A.P. Photography]

Tracy she has a pic on her profile

[Tracy]

Tracy she has a pic on her profile
OOOOOOOOOOOO I was wondering what the deal is. :D

[A.P. Photography]

OOOOOOOOOOOO I was wondering what the deal is. :D
;) Still havent heard from you about the shoot nor Joey about DF.

[Tracy]

;) Still havent heard from you about the shoot nor Joey about DF.

I'm not ready for the shoot if you are talking about the 240's. I am still waiting for my rear bumpers to come from VIS. I don't want to take official pics until they are completely ready. If you are talking about the Evo, Dan just got it running again and I would like to wait until it warms up a tad bit more. I will talk to Joey about DF. When did you e-mail him?

[A.P. Photography]

I'm not ready for the shoot if you are talking about the 240's. I am still waiting for my rear bumpers to come from VIS. I don't want to take official pics until they are completely ready. If you are talking about the Evo, Dan just got it running again and I would like to wait until it warms up a tad bit more. I will talk to Joey about DF. When did you e-mail him?
As for the 240's ok just let me know. The calendar shoot - not a problem and I would prefer it a little warmer as well.

I emailed him when you told me to email him, lol. Can't remember when right now.:thinking:

[buddha@TeamFX]

I love the FR500's those are some good looking wheels...They really set off a fox coupe car!

[mach1girl]

I love the FR500's those are some good looking wheels...They really set off a fox coupe car!

What do you think of these?

[Tracy]

What do you think of these?


I like the second ones if they were black. I can't see the first ones that well, are they the same?

[A.P. Photography]

What do you think of these?Those are nice but gotta have deep dish on the back with a fat lip.

[mach1girl]

Those are nice but gotta have deep dish on the back with a fat lip.

Agreed. They are BSA's.

[PSINXS]

finally a girl thats not an AW

[WINDSOR]

i guess you are the same mach1girl from streetcarforums then. I post on there as well as dsmlx and have a gray fox body notchback. Welcome to the site!

[mach1girl]

i guess you are the same mach1girl from streetcarforums then. I post on there as well as dsmlx and have a gray fox body notchback. Welcome to the site!

that is me! SCF is down and no telling when it will be back up.
you going to Prospeed for Dyno day saturday?

[Tracy]

*sigh* Still no responses to me. :(

[mach1girl]

*sigh* Still no responses to me. :(

Sorry Girl:o Long day at work and brain is fried. Thank you for the weblink and as to racing.... i don't know you probably been doing it longer than me soooooo;)

[WINDSOR]

that is me! SCF is down and no telling when it will be back up.
you going to Prospeed for Dyno day saturday?

hmmm i have to work this saturday...also my car is down right now for a new clutch. God damn this turbo and all the torque it makes. Are you dynoing your car again?

[mach1girl]

*sigh* Still no responses to me. :(

Sorry girl:o Long day at work and a bit fried. thank you for warm welcome.:)

[WINDSOR]

Sorry Girl:o Long day at work and brain is fried. Thank you for the weblink and as to racing.... i don't know you probably been doing it longer than me soooooo;)

lmao i got my money on mach1girl. Gotta go for the ford you know.

[Tracy]

Ok, now I feel better. I thought someone had talked some shit about me to you and I was going to have to run them over :)

Windsor, how about me and you race instead? That'll be fun :D

[mach1girl]

hmmm i have to work this saturday...also my car is down right now for a new clutch. God damn this turbo and all the torque it makes. Are you dynoing your car again?

no, can't. the mach has a small issue. tim @mph has fixing the powerpipe. it was set up where air from the S/C was backwashing into the lightning mas air meter and causing the car to stall whenever I would push in the clutch during de-celeration(sp?). Not fun, especially on a turn when the power steering goes out. So Tim set the idol high until we could get the powerpipe fixed, (temp fix for Fun Ford.) Then Tim is going to re-dyno it Tuesday. Also there might be something wrong with the fuel pump or fuel gage. Going to check that out also. The powerpipe is coming off though. The original intentions were for the shaker to be functional, but can't have that and the powerpipe. Doesn't add or take away horse power but what's a Mach1 without the functional shaker, plus it sounds cool too! I am not worried about horsepower at this point anyway. The bottom half of my engine can't handle much more than about 450-460 to be safe. It has dyno'd at 470 and tim tuned it down. It is a street car so i am happy just being in the 400's. Hell if i want 600-700HP race car, i will build me a foxbody;) .

[WINDSOR]

no, can't. the mach has a small issue. tim @mph has fixing the powerpipe. it was set up where air from the S/C was backwashing into the lightning mas air meter and causing the car to stall whenever I would push in the clutch during de-celeration(sp?). Not fun, especially on a turn when the power steering goes out. So Tim set the idol high until we could get the powerpipe fixed, (temp fix for Fun Ford.) Then Tim is going to re-dyno it Tuesday. Also there might be something wrong with the fuel pump or fuel gage. Going to check that out also. The powerpipe is coming off though. The original intentions were for the shaker to be functional, but can't have that and the powerpipe. Doesn't add or take away horse power but what's a Mach1 without the functional shaker, plus it sounds cool too! I am not worried about horsepower at this point anyway. The bottom half of my engine can't handle much more than about 450-460 to be safe. It has dyno'd at 470 and tim tuned it down. It is a street car so i am happy just being in the 400's. Hell if i want 600-700HP race car, i will build me a foxbody;) .

thats cool..good luck with getting it ready for fun ford...Tim knows his stuff so he should be able to fix your problems. Shit,why do you think 600-700 hp is for race cars. My foxbody is just a little street car and it better be making 800 hp (flywheel) for me to be happy. Maybe that is why i am putting a $1000 clutch in this bitch. I got some supras and cough EVOs to smak down.

[WBT_tuner]

very nice stang and welcome