PDA

View Full Version : E-E Motorsports.....


Krazykouki
03-03-2006, 10:05 PM
Does anyone here know of, or heard anything about E-E Motorsports.
-OR-
even better, has anyone had any problems with them?
collins
03-03-2006, 10:09 PM
eric over there is the one that built my boy's rb 240. did a good job on it too. the engine kept blowing coil packs, but thats because it had a mines ecu in it that was tuned hella rich.
collins
03-03-2006, 10:26 PM
an rb does not just blow coil packs, they blow coil packs because improper wiring...

lol whatever you say man.
eViLMunkey
03-03-2006, 10:28 PM
sure sure...
fawk_you
03-03-2006, 10:56 PM
They are good guys. Ive known eric for about 2+ years now...did all the suspension work I had on my celica... he his work is awesome! They are just very hard to get ahold of.
Seymour222
03-03-2006, 11:18 PM
I like those cats, they re cool, they work, they bullshit, they box, they drink, okay maybe not the last you'd have to ask them. I approve. Be careful that Erin, not Eric dude, will rip your arms out of their sockets.
RUSH
03-03-2006, 11:21 PM
Does anyone here know of, or heard anything about E-E Motorsports.
-OR-
even better, has anyone had any problems with them?



Sounds like you may of had a problem with them...right?
brads94accord
03-06-2006, 11:17 AM
Does anyone here know of, or heard anything about E-E Motorsports.
-OR-
even better, has anyone had any problems with them?


well he took months to do an auto to manual conversion on my friends eclipse that i could have done in 8 hours if i had the time....not to mention he put the clutch in backwards so the car wouldn't go into gear.
speedminded
03-06-2006, 02:06 PM
well he took months to do an auto to manual conversion on my friends eclipse that i could have done in 8 hours if i had the time....not to mention he put the clutch in backwards so the car wouldn't go into gear.clutch in backwards? The disk or the pressure plate? i find that hard to believe... :dunno:
PSINXS
03-06-2006, 02:11 PM
they r the shit hands down. ka-t specialists too. i have been to the shop a couple times, and met eric. he's good guy and very helpful.
PhAtBoYMr2
03-06-2006, 02:16 PM
TIGER RACING > ALL SHOPS
speedminded
03-06-2006, 02:39 PM
TIGER RACING > ALL SHOPSsammy's the man, it's funny when i would be hanging out over there and someone would come in asking about honda parts/work...Sam would point to me and say talk to him....i'm like mannn, i come here to chat about real cars with actual torque and NOT wrong wheel drive (as in, rear wheel drive) and i get stuck talking to some park bench wing body kit 100lbs of torque fool that's not really gonna spend any money there, lol. I'll get back into real wheel drive eventually :)
BTEC
03-06-2006, 02:47 PM
MSPi (Mainstream)/TurboDave has taken over. Nothing else even come close.


Can somebody hook me up doing commercials? lol!!!!
HiPSI
03-06-2006, 04:02 PM
the engine kept blowing coil packs, but thats because it had a mines ecu in it that was tuned hella rich.


uhhh.... how rich a car runs has zero to do with dead coilpacks. fouled plugs yes, dead coils no.
BTEC
03-06-2006, 04:04 PM
rb20's and their coils suck pack baboon ass. the pink stuff.
brads94accord
03-08-2006, 10:46 PM
clutch in backwards? The disk or the pressure plate? i find that hard to believe... :dunno: he put the disc on backwards.
eh2
03-09-2006, 02:41 AM
he put the disc on backwards.


They must come highly recommened.
RISKYB
03-09-2006, 09:19 AM
i find it hard to believe that a clutch would or could be installed backwards
brads94accord
03-11-2006, 12:07 PM
its pretty easy, you just flip the disc around so the flywheel side is now in contact w/ the pressure plate.
rhds14
04-12-2006, 08:07 AM
hey brad you need to talk to your friend mark because when it left the shop it ran fine. and he was the one that took it back aprat and put it together wrong not us. He also brought it back to us to fix his mistake.
RBpoweredSileighty
04-12-2006, 04:41 PM
TIGER RACING > ALL SHOPS

sam is cool as hell, and a great person to talk with
EmotorsportsE
04-12-2006, 09:59 PM
I still don't know how someone can put a clutch disc in backwards, Brad you need to talk to Mark, that was all his doing. Yes it is easy to flip the disc around, but re-installing a pressure plate over it will not work.

E
Seymour222
04-12-2006, 10:45 PM
Yes. What upper Snizzle.
mp5o
04-12-2006, 10:49 PM
TIGER RACING > ALL SHOPS

When I called to ask them about my engine work... They didnt seem to take me too seriously... Let's just say they lost ALOT of money due to that mistake. Not everyone who call's askin about shit is jus dreamin.... I was dead serious about dealing with them and they tryed to play around with me. They even tried to give me a quote that was significantly MORE than what was listed on their website.... Oh well, there loss. ;)